EoW March 2009

2009

S-T

Solvay Padanaplast SpA – Italy Fax : +39 0521 870427 Email : info.padanaplast@solvay.com Website : www.padanaplast.com

productivity and cost saving through 0.05% length measurement accuracy. Taymer International Inc – Canada Fax : +1 905 479 2636 Email : info@taymer.com Website : www.taymer.com

Taymer has also been producing hot foil printers for durable marking on PE, HDPE, XLPE, nylon and Teflon, offering bright, high contrast white printing on dark cable jackets. The printer produces highly accurate length measurement and sequential numbering, and is simple to operate and change printing colours. Taymer designs andmanufactures contact length measurement system, including The Length Rite 1200, for improved

Taymer International Inc Booth 3727 Taymer International Inc has been designing and building marking equipment for the wire and cable industry for over 40 years. The product range includes surface inspection and print verification systems, hot foil printers, indent printers, aerospace inkjet and laser printing solutions, and cable measurement devices. Taymer has recently developed a surface inspection system for the wire and cable industry designed to pick up defects smaller than 1mm. With multiple-camera set-up and advance vision software, defects such as jacket holes, bulges and surface blemishes will be detected. Taymer will also be exhibiting its print verification system. Print View 1400 will freeze an image of a product as it is being printed and display the image on a remote monitor, enabling the operator to easily verify print quality. The Print View can include OCR software to warn when the printer is producing scrap.

Teknor Apex Booth 3800

Vinyl division :

All

RoHS-compliant

products,

including

Apex®

vinyl

➢➣➢

EUROTEK S.r.l. Tel: (+39) 0872 72581 C.da Villa Andreoli 215/A Fax: (+39) 0872 711978 I-66034 LANCIANO (Ch) http:\\ www.eurotek-italy.it Italy P.IVA IT 01619630690 e-mail: info@eurotek-italy.it

Taymer's Print View verification system ▼ ▼

Eurotek has designed and manufactured a co-extrusion crosshead type ECM95-DS for the production of low tension cables, with a diameter con- ductor of 95mm and a maximum insulated diameter of 135mm, capable of extruding thermoplastic compounds. The head allows the manual cen- tering of the die, in addition to the fine tuning of the tip. The head has a heating system with heaters and a thermostatic circuit; the holes for Dynisco temperature sensors control pressure and temperature in the melt stream for Extrusion Processing. Eurotek is a complete design and manufacturing resource for all your extrusion needs; with its wide range of manual and fixed crossheads for single layer and co-extrusion, flat cables and thermo-regulated type for silicone rubber. Eurotek also offer parts, hardened steel, diamond insert tooling and tungsten carbide. Eurotek are exhibiting at WIRE-TUBE RUSSIA 12-15 May 2009.

http:\\ www.eurotek-italy.it e-mail: info@eurotek-italy.it

79

EuroWire – March 2009