EPIC® Pin & Sleeve

CONSTRUCTION EPIC ® ALUPRES Mechanical Interlocks

Used individually, surface mounting is quickly accomplished using the four integral mounting tabs. An optional support plate allows multiple units to be assembled into a distribution panel.

All socket outlets are provided pre-wired with stripped and numbered cables 70 cm long, eliminating the need to open the enclosure. This reduces installation time by up to 30%.

Use of AC23A-AC3 category cam switches allows direct switching of motor and other highly inductive electrical loads and have a conditional short circuit rating of 10,000A. UL 508 approved as a manual motor controller.

The zinc-plated steel interlock mechanism guarantees electrical operation only when a plug is inserted into the outlet. Plug removal is blocked while power is turned on, eliminating arc-flash hazard.

The control knob is easily operated even with a gloved hand.

EPIC ® ALUPRES 20/16A & 30/32A outlets are IP67 rated for watertight service against violent water jets. The 60/63A outlets are IP55 rated for watertight service in lower pressure wash-down applications.

The powder-painted aluminum alloy enclosure provides excellent resistance to heat and corrosive agents. Resistance to impact and mechanical stress is over 50% greater than thermoplastics. Made with low smoke, low toxicity, and halogen-free materials.

25