2018-Continental-Owners-Manual

Wheels and Tires

5. Remove the steel winged washer nut securing the spare tire by turning it counterclockwise. 6. Remove the spare tire from the spare tire compartment. 7. Remove plastic wing nut and jack and lug wrench assembly. Detach lug wrench from jack by turning the jack hex nut drive screw counterclockwise.

9. Loosen each wheel lug nut one-half turn counterclockwise, but do not remove them until the wheel is raised off the ground.

11. Position the jack so that the vehicle downward flange rests in the jack saddle flange as shown above. Raise the vehicle by using the lug wrench to turn the jack nut clockwise. Once the flat tire is raised above the ground, remove the lug nuts with the lug wrench. 12. Replace the flat tire with the spare tire, making sure the valve stem is facing outward. Reinstall the lug nuts until the wheel is snug against the hub. Do not fully tighten the lug nuts until the wheel has been lowered. 13. Lower the wheel by turning the jack handle counterclockwise.

E145908

10. The vehicle jacking points are shown above, and are depicted on the yellow warning label on the jack.

E224481

8. If your vehicle has a wheel trim, use the tool supplied to remove it and access the lug nuts.

E201100

367

Continental (CPL) Canada/United States of America, enUSA, Edition date: 201706, First Printing