Midwest Technology Products

• CLICK ON STK # FOR CURRENT PRICE •

SAFETY CONTROLS

DRILL PRESSES

Restart Safety Plugs

8" 5-Speed Benchtop Drill Press Rikon Induction motor provides plenty of power for drilling, stepped pulleys give multiple spindle speed choices, adjustable depth stop for repeatable drilling. Table 6-5/8" x 6-3/8", tilts 45°, rotates 360°. Front on/off push button switch w/removable safety tab for extra security.

SAFETY CONTROLS Woodworking Machinery motor starters. The Sensing-Saf-Start® Plug prevents equipment restart fol - lowing a power interruption, and will not allow a reset until the equipment switch has been turned off. • Upgrades small machines to meet latest safety requirements • Plugs into machine power cord & plug (Model 1996) • Replaces old, frayed, ungrounded power cords (Models 1997, 98, 99) • Installs in minutes on: drill presses, belt sanders, band saws, power hack - saws, cut-off machines, table saws, small lathes, small milling machines, scroll saws & tool grinders You must install any matching plugs on the power cord. Model 1996 For 120V machines w/a good power cord & plug (when cord is not frayed & plug has a ground pin). Includes short extension- cord style, 14" cord on male plug end, 12" cord on female receptacle end. Stk. Mfr. Volts Amps Price 485650 1996 120 15 WEB Model 1997 For all 120V machines w/an old cord &/or you want the reset button closer to the machine for easy access, but still plugged into a duplex-type outlet. Plug is on the end of the 8' cord. Includes 20" cord on equip. switch end, 8' cord w/molded plug on power end. Stk. Mfr. Volts Amps Price 485651 1997 120 15 WEB Model 1998 For 120V machines w/an old cord &/or you want to connect to a disconnect box, or install either a 20 amp or twisting lock- type plug on the cord. Sensing-Saf-Start housing is located close to the machine w/out a plug on the end of the 8' cord. Includes 20" cord on equip. switch end, 8' cord on power end (no plug). Stk. Mfr. Volts Amps Price 485652 1998 120 18 WEB Model 1999 For 200-240V, single phase machines (3-wire).You must install any matching plugs on the power cord. Includes 20" cord on equip. switch end, 8' cord on power end (no plug). Stk. Mfr. Volts Amps Price 485653 1999 200-240 15 WEB iVac Switch Box BCTINT Used for tools and dust collectors operating on 115 Vac @ 15 Amps maximum. Automatically turns on your dust collector (up to 1 HP) or shop vacuum when you turn on a power tool plugged into the unit. The dust collector will continue to run for 6 seconds after the tool has been turned off in order to clear any dust and debris in the hoses. TUV safety approval and conforms to UL STD 244A and certified to CSA STDC22.2 #14. Stk. Mfr. Price 529500 SB-NA WEB • Complies w/latest OSHA & NFPA safety standards • Offers electrical disconnect compliance by unplugging JDS Products The easy-to-install, inex- pensive solution to anti-automatic restart safety, without the high cost of magnetic

Chuck 1/2". Drilling capacity 1/2". Speed 620-3,100 RPM. Size 7" x 16" x 23". Weight 32 lbs. Includes chuck key, holder and speed selection chart. Stk. Mfr. Volts HP

Price

WEB

694170

30-100

120

1/3

10" 5-Speed Bench Drill Press with Light General Intl. Loaded with features you would expect in an industrial type drill presses. Choose from 5 speeds to perfectly match the ideal cutting conditions needed for your material. Featuring a cross-pattern precision laser guide sys - tem, this drill press is perfect for home or worksite. Unique built-in LED work light illuminates the work table. Adjustable dial depth stop with scale.

Chuck 1/2". Drilling capacity 1/2". Speed 570-3,050 RPM. Includes chuck key and 2 AA batteries. Stk. Mfr. Volts

Price

WEB

420940

DP2002

120

10" 5-Speed Bench Drill Press with Laser

Features 2-beam alignment laser, adjustable depth stop and keyed chuck to achieve consistent and accurate results when drilling. VS gearing for different material types, 0-45° tilting 7-5/8" x 7-5/8" table for precise drilling. Bump-off switch for added safety. Chuck 1/2". Speed 570-3,050 RPM.

Includes chuck key, 2 AA batteries and alignment laser. Stk. Mfr. Volts HP

Price

WEB

260298

3320-01

120

1/2

12"VS Bench Drill Press

Powerful enough to tackle big jobs, yet portable enough to take it anywhere. 1/2 HP induction motor pushes through almost anything you throw at it; with over 3-1/8" spindle travel for maximum depth cutting, and the X-shaped XACTA® laser ensures drilling accuracy. Digital readout dis- plays spindle speed. Adjustable 9-1/2"W x 9-1/2"D tilts 45° .

Chuck 5/8". Drilling capacity 5/8". Speed 530-3,100 RPM. Size 29.7" x 19.9" x 12.2". Weight 85 lbs. Includes chuck key, drift key and hex wrenches. Stk. Mfr. Volts HP Phase

Price

WEB

486039

JWDP-12

115

1/2 1

344 www.midwesttechnology.com | Phone 800.831.5904 | CLICK ON STK # FOR CURRENT PRICE