2018-MKX-Owner's Manual

Maintenance

Note: If the fluid level is below the minimum range do not drive your vehicle. An underfill conition can damage the transmission. Correct Fluid Level If the fluid level is within the hash mark area (between points A and B) do not add any fluid. High Fluid Level If the fluid level is above the maximum range (above point B) fluid may need to be removed. High fluid levels may be caused by a overheating condition. If you have operated your vehicle at high speeds, towing a trailer or in city traffic during hot weather, allow your vehicle to cool for a minimum of 30 minutes before rechecking the level. Note: An overfill conition can damage the transmission. Adding Transmission Fluid * 1. Rotate the automatic transmission fluid cap in a counterclockwise direction. *

2. Remove the cap and dipstick and wipe it with a clean, lint-free cloth. 3. Add fluid that meets the Ford specifications. See Capacities and Specifications (page 387). Pour the fluid directly into the automatic transmission fluid cap and dipstick hole. 4. Replace the cap and dipstick and remove it again to check the fluid level. 5. Make sure that the fluid level is between the MIN and the MAX marks. 6. Replace the automatic transmission fluid cap and dipstick. Turn it clockwise until you feel a strong resistance.

x2

* Vehicles With 2.7L EcoBoost WARNING

Do not run the engine with the air filter disconnected.

E190367

1. Remove the two air filter assembly securing bolts. 2. Lift the air filter assembly to disengage the locating pins.

322

MKX (CD9) Canada/United States of America, enUSA, Edition date: 201707, First Printing