EoW March 2012

wire 2012 show

26 - 30 March

Mandon reports productivity losses eg due to low RPMs, avoids unproductive times by pinpointing problems immediately, improves the monitoring quality, and optimises system utilisation through permanent technical system checks. Schwer + Kopka GmbH – Germany Fax : +49 751 561 6410

available to execute the machine, so that it perfectly ts into your line. Further exhibits on the stand will be products from Samp SpA, which Rolf Schlicht o ers in Germany. Huestis Air misers will also be on display, as will Movacolor, the material throughput measurement system MC-Weight and dosing system MC Balance. The company will also display its rapid purge cleaning compound. Rolf Schlicht GmbH – Germany Fax : +49 406 799 4211 Schwer + Kopka will introduce the new Mandon technology to the fastener making industry. Mandon is a completely new operating concept which supports the machine user in an unprecedented manner when analysing and rectifying problems. Mandon is the logical step forward from the known Andon information boards used widely within the industry. The new Machine Andon – called Mandon – is an intelligent messaging system which automatically provides the operator with important information based upon continuous observation of all process data and logical conclusions drawn from that. Whenever there is a need for any kind of intervention, Mandon makes itself known by prompting the respective message on the screen of the load monitor. The know-how for a reliable messaging system is based on a set of pre-programmed rules that incorporate the expert knowledge collected over many years. Mandon-technology provides the right information to put measures into e ect immediately, which leads to more productivity and better quality. Mandon gives timely advice to improve settings: if the software determines, for example, that the monitoring limits are set too wide, a message appears on the screen showing the recommended setting. All the operator needs to do to activate the recommendation is to press “yes”. Mandon warns in case of critical conditions, makes recommendations, informs about technical problems, and transmits messages for the operator. Email : info@schlicht-gmbh.de Website : www.schlicht-gmbh.de Schwer + Kopka Stand: 15H03

Email : info@schwer-kopka.de Website : www.schwer-kopka.de

Setic Stand: 10E38

Setic France, a member of the Gauder Group, designs and manufactures high quality machines made in France leading the innovation for optimised wire and cable production: double twist bunchers/ stranders for the power cable and automotive industry as well as complete solutions to produce high quality LAN cables with enhanced performances (in one step or two steps according to product mix).

High quality machines from Setic

▲

On the booth, Setic will have a modern Double Twist Buncher for automotive application o ering the highest reliability as well as the lowest operating cost thanks to the well-known GreenBow and single bow design. Also, a 1,000mm Single Twist Cabler will be available to present its e ciency (900 RPM) and exibility to produce LAN, control, instrumentation and special cables. Upgrading and services departments will highlight most recent developments to maintain and improve production capacity of existing machinery.

Setic – France Fax : +33 4 77 71 10 85

Email : setic@gaudergroup.com Website : www.gaudergroup.com

Shenyang Tianrong Cable Materials Stand: 11J73

Established in 1990, Shenyang Tianrong Cable Materials is a global supplier

➣➢➣

167

EuroWire – March 2012