ARP Supply Vol. 3

Mounting Rings, Adapter Kits & Blowers

Unit#2786043

Unit#2786042

MOUNTING GROMMETS

NEOPRENE GASKETS

For use with 3.3” dia. motors. Includes gasket and (4) grommets.

Order No.

Bolt Circle Dia. In.

GASKET0167

2.84

Unit#2786022

RAIN SHIELDS

Includes steel sleeve.

Order No.

Desc.

GROM6008 GROM6000

For 3/4” slot For 1/2” slot

Unit#2786024

RUBBER MOUNTING RINGS

Order No.

Motor Shaft Dia. In.

KIT170

1/2 5/8

RAIN6000

KIT188

KIT184

Unit#2786048

TIE RODS

Staked

KIT187

For use with direct-drive blower motors and clamp-type supports. No. KIT187. For use with H33 in Nutone and Broan applications.

8” length. No. KIT220. Includes one staked nut and one regular nut.

Order No.

Order No.

Motor Dia. In.

Desc.

Type

For 5.6”, 5.0” & 4.4” Dia. Motors

KIT220 KIT221

8-32 NC 10-32 NC

5.6 4.4

KIT184 KIT183 KIT186 KIT180 KIT187

Henrite 2.50” OD Henrite 2.25” OD All Rubber 2.50” OD

Unit#2786055

WATER SLINGERS Order No.

For 3.3” Dia. Motors

Henrite 1.80” OD

Dim. In. ID x OD

Rubber mounting rings

Mounting Rings, Adapter Kits & Blowers Unit#2786014 MOUNTING ADAPTER KITS & PARTS

SLINGR6002

1/2 x 2

Unit#1000001

H33

KIT414

DRAFT INDUCER BLOWERS

Single speed, shaded pole design with open enclosure and sleeve bearings. Clockwise rotation. 3.3” diameter. 208-240V. 60 Hz. 3000 RPM.

MNT1518

KIT208

Order No.

Desc.

Order No. 82862

Mounting kit for 3.3” dia. Nu-tone units; includes (4) nuts and (2) hex-hub brackets

H33

HP

Amps

1/35

0.50 to 0.59

KIT414 Adjustable casebolt mounting kit MNT1518 Coleman “Lord” mount; 1/4” x 8-32 stud; 1/4” x 8-32 hole; 1/2” x 1/2” bushing KIT208 3/8” x 8-32 x 3/8” studs; 1/2” x 1/2” bushing

This information is provided “as is” without warranty of any kind by any person, including without limitation, the owner and the publisher.

296