Construction World August 2018

UNIQUE NEW PRODUCTS for the construction industry

D ue to the unique nature of Perlite, these composite products offer significant insulation, fire-resistance, lightweight and acoustic properties. The first products in the CemteQ range include PlasterLite which is a super-smooth, easy-to-apply composite material for trowel-on plaster and low-velocity pumped plaster applications. It combines a carefully developed combination of exfoliated Perlite with quality cement, admixtures and micro fibres in a bag to offer a unique one-coat plaster solution without the requirement for a skim plaster. PlasterLite is available in white and grey and offers approximately six to eight times the insulation properties of ordinary plaster, saving significantly on heating and cooling costs. The R-value for 15 mm ordinary plaster is approximately 0,019 m 2 .K/W, whereas the R-value for PlasterLite White is 0,128 m 2 .K/W and PlasterLite Grey is 0,156 m 2 .K/W. PlasterLite also weighs between 25-30% of traditional plaster, reducing the weight by one ton per 50-60 m 2 of plaster at 15 mm thick. Newly introduced is also CemteQ’s ScreedPerl insulating, lightweight screed material. This is designed to prevent down- ward heat loss in floors, saving significantly on heating costs. It also provides a light- weight, insulating solution for roofs and can be easily sloped towards drainage points or to the roof edge providing suitable water run- CemteQ has launched the first in its range of Perlite and cement composite products. These composites use Perlite as an aggregate replacement, together with cement and special admixtures for bespoke plaster, screed and concrete applications.

off and preventing damage. The R-value for a 30 mm floor screed using traditional materials would be 0,042 m 2 .K/W compared to ScreedPerl with an R-value of 0,316 m 2 .K/W, providing approximately 7,5 times the insulation of ordinary plaster. The installed weight of ScreedPerl is between 460-470 kg/m 3 which equates to roughly 20% of traditional screed material. This offers distinct structural design ben- efits and makes it easier to work with and transport. The product is not suitable for high wear areas and must be covered with a floor covering such as carpets, wood or tiles. ScreedPerl can be applied to various uneven or curved surfaces with a suitable bonding agent. It is not waterproof and must be cov- ered with a suitable waterproofing system when used on roof decks. CemteQ’s Perlite-based products also of- fer excellent fire protection for up to 4 hours. They have low linear expansion characteris- tics which greatly reduce the development of cracks, ensuring that the temperature of the structure and load-bearing members is

maintained below the critical point at which weakening or failure is likely to occur. They do not release smoke or toxic gas and do not disintegrate or spall when cooled suddenly with a firehose. The products pro- vide efficient sound dampening, particularly for pulsed sounds, are inorganic and do not rot or decay over time. 

39

CONSTRUCTION WORLD AUGUST 2018

Made with FlippingBook flipbook maker