Lincoln-MKZ-Owner-Manual

Cruise Control

Following a Vehicle to a Complete Stop If your vehicle follows a vehicle to a complete stop and remains stationary for less than three seconds, your vehicle accelerates from a stationary position to follow the vehicle ahead. If your vehicle follows a vehicle to a complete stop and remains stationary for more than three seconds, press RES+ or the accelerator pedal to follow the vehicle ahead. Setting the Gap Distance Note: The gap setting is time dependent and therefore the distance adjusts with your vehicle speed. Note: It is your responsibility to select a gap appropriate to the driving conditions. You can decrease or increase the distance between your vehicle and the vehicle in front by pressing the gap control.

When a vehicle ahead of you enters the same lane or a slower vehicle is ahead in the same lane, the vehicle speed adjusts to maintain a preset gap distance. A vehicle graphic illuminates in the instrument cluster. Your vehicle maintains a consistent gap from the vehicle ahead until: • The vehicle in front of you accelerates to a speed above the set speed. • The vehicle in front of you moves out of the lane you are in. • The vehicle speed falls below 12 mph (20 km/h). • You set a new gap distance. The system applies the brakes to slow your vehicle to maintain a safe gap distance from the vehicle in front. The system only applies limited braking. You can override the system by applying the brakes. If the system determines that its maximum braking level is not sufficient, an audible warning sounds when the system continues to brake. A red warning bar displays on the windshield and you must take immediate action.

A

B

E222822

A B

Gap decrease. Gap increase.

E164805

The selected gap appears in the information display as shown by the bars in the image.

225

MKZ (CC9) Canada/United States of America, enUSA, Edition date: 201706, First Printing