Lincoln-MKZ-Owner-Manual

Doors and Locks

Resetting the Power Decklid The decklid may not operate correctly and you may need to reset it if: • The vehicle battery charge is low. • You disconnect the battery. • You manually close the decklid and leave it unlatched. To reset the power decklid: 1. Disconnect the battery for 20 seconds then reconnect the battery. 2. Manually close the decklid making sure it is fully closed. 3. Power open the decklid using the remote control or instrument panel button. KEYLESS ENTRY SECURICODE™ KEYLESS ENTRY KEYPAD The keypad is located near the driver window. It is invisible until you touch it, then it lights up so you can see and touch the appropriate buttons.

Note: If you enter your entry code too fast on the keypad, the unlock function may not work. Re-enter your entry code more slowly.

Note: Let the power system operate the decklid after pressing the control. Pushing or pulling the decklid may activate the obstacle detection feature and stop the power operation. With the Decklid Close Button

Press the button inside the decklid on the left-hand side.

E194407

Obstacle Detection The decklid will reverse to full open if it detects an obstacle while closing. Three chimes will sound as the decklid begins to reopen. Remove the obstacle to close the decklid. Note: Before driving your vehicle, check the instrument cluster for a trunk ajar or door ajar message or warning indicator. Failure to do this could result in unintentionally leaving the decklid open while driving. The decklid will stop and three chimes will sound if it detects an obstacle while opening. Remove the obstacle to operate the decklid.

E138637

You can use the keypad to: • Lock or unlock the doors. • Program and erase personal entry codes. • Arm and disarm the anti-theft alarm. • Release the trunk. Note: The keypad does not operate a power decklid.

74

MKZ (CC9) Canada/United States of America, enUSA, Edition date: 201706, First Printing