Lincoln-MKZ-Owner-Manual

Doors and Locks

• Press 7·8 to save personal code 4 • Press 9·0 to save personal code 5. You may also program a personal entry code using the touchscreen. See Settings (page 466). Tips: • Do not set a code that uses five of the same number. • Do not use five numbers in sequential order. • The factory-set code works even if you have set your own personal code. Erasing a Personal Code 1. Enter the factory-set 5-digit code. 2. Press and release 1·2 on the keypad within five seconds. 3. Press and hold 1·2 for two seconds. You must do this within five seconds of completing Step 2. If you complete this successfully, you have erased all personal codes and only the factory-set 5-digit code works.

Anti-Scan Feature The keypad goes into an anti-scan mode if you enter the wrong code seven times (35 consecutive button presses). This mode disables the keypad for one minute and the keypad lamp flashes. The anti-scan feature turns off after: • One minute of keypad inactivity. • Pressing the unlock button on the remote control. • Switching the ignition on. • Unlocking your vehicle using intelligent access. Unlocking and Locking the Doors To Unlock the Driver Door Enter the factory-set 5-digit code or your personal code. You must press each number within five seconds of each other. The interior lamps illuminate. Note: All doors unlock if you enable the all door unlocking mode. See Locking and Unlocking (page 68).

You can operate the keypad with the factory-set 5-digit entry code. The code is located on the owner’s wallet card in the glove box and is available from an authorized dealer. You can also create up to five of your own 5-digit personal entry codes. Programming a Personal Entry Code To create your own personal entry code: 1. Enter the factory-set code. 2. Press 1·2 on the keypad within five seconds. 3. Enter your personal 5-digit code. You must enter each number within five seconds of each other. 4. Press 1·2 on the keypad to save personal code 1. The doors lock then unlock to confirm that programming was successful. To program additional personal entry codes, repeat Steps 1-3, then for Step 4: • Press 3·4 to save personal code 2 • Press 5·6 to save personal code 3

75

MKZ (CC9) Canada/United States of America, enUSA, Edition date: 201706, First Printing