Machine Bolts & DA Bolts (5-53Supp24-28)

SUPPLEMENTAL CATALOG BULLETIN 5-53.24 December 2008 Revised February 2009

Sometimes referred to as "crossarm" bolts or "through" bolts, Hubbell Power Systems (HPS) square head and hex head machine bolts are manufactured to HPS specifications that meet the requirements of ANSI C135.1 and are avail- able in a range of thread diameters and lengths. The head is marked with an identifying "C" and the bolt includes an Bolts, Machine - Square Head Continued on next page ANSI C135.1 Galvanized per ASTM A-153 NOTE:This page replaces information on Catalog Page 5-7, dated December 2008.

assembled square or hex nut that corresponds to the head shape. Threads are formed with the rolled thread process. Bolt length is measured from the underside of the head to the last thread. Semi-cone point comes on bolts 8" and lon- ger in 1 ⁄ 2 ", 5 ⁄ 8 " and 3 ⁄ 4 " diameters. All others have chamfered or rounded ends. For lengths not shown, contact HPS Customer Service.

Catalog No. Length MinimumThread Length 3 / 8 " Thread Diameter ( 3 / 8 -16 UNC)

4,250 lb. Rated Tensile Strength

Approx. Ship Wt. Each

9 / 16 "

1 / 4 "

.21 lbs. .24 lbs. .27 lbs. .31 lbs. .33 lbs. .35 lbs. .40 lbs. .48 lbs. .49 lbs. .57 lbs. .60 lbs. .71 lbs. .73 lbs. .82 lbs. .36 lbs. .39 lbs. .48 lbs. .57 lbs. .60 lbs. .69 lbs. .75 lbs. .78 lbs. .88 lbs. .93 lbs. 1.08 lbs. 1.23 lbs. 1.40 lbs. 1.54 lbs. 1.71 lbs. 1.76 lbs. 1.96 lbs. 2.15 lbs. 2.31 lbs. .11 lbs. .13 lbs. .15 lbs. .17 lbs. .18 lbs. .19 lbs. .21 lbs. .24 lbs. .27 lbs. .32 lbs.

8602 8603 8604

2" 3" 4"

1" 1" 3" 3" 3" 3" 3" 3" 4" 4"

9 / 16 "

4 1 ⁄ 2 "

860412

8605

5"

5 1 ⁄ 2 "

860512

3 / 8 " Bolt Head Size

T2060412 6"

8607 8608 8610

7" 8"

10"

1 / 2 " Thread Diameter ( 1 / 2 -13 UNC)

7,800 lb. Rated Tensile Strength

1 1 ⁄ 4 " 1 1 ⁄ 4 " 1 1 ⁄ 4 "

8702

2"

3 / 4 "

21 / 64 "

2 1 ⁄ 2 "

870212

8703 8704

3" 4" 5" 6" 7" 8" 9"

3" 3" 3" 3" 3" 4" 4" 4" 4" 6" 6" 3" 3" 3" 3" 4" 4" 4" 6" 6" 6" 6" 6" 6" 6" 6" 6"

4 1 ⁄ 2 "

870412

3 / 4 "

8705 8706* 8707* 8708* 8709* 8710* 8712 8714

1 / 2 " Bolt Head Size

10" 12" 14" 16"

DF2B16

*RUS Listed: c - Bolt, machine

5 / 8 " Thread Diameter ( 5 / 8 -11 UNC)

12,400 lb. Rated Tensile Strength

2"

8802

1 1 ⁄ 2 " 1 1 ⁄ 2 " 1 1 ⁄ 2 "

15 / 16 "

27 / 64 "

2 1 ⁄ 2 "

880212 PS8803

3" 4" 5" 6" 7" 8" 9"

8804 8805 8806* 8807* 8808* 8809* 8810* 8812* 8814* 8816* 8818* 8820* 8822* 8824* 8826 8828

15 / 16 "

5 / 8 " Bolt Head Size

10" 12" 14" 16" 18" 20" 22" 24" 26" 28"

For additional square nuts, see Catalog page 5-33

Continued on next page

*RUS Listed: c - Bolt, machine

® NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice. 210 N. Allen St. • Centralia, MO 65240 © 2008 Hubbell Incorporated                           Printed in USA ®

POWER SYSTEMS, INC.

Bolts, Machine - Square Head Continued from previous page. For Hex Head Bolts, see next page. NOTE:This page replaces information on Catalog Page 5-7, dated December 2008.

SUPPLEMENTAL CATALOG BULLETIN 5-53.25 December 2008

ANSI C135.1 Galvanized per ASTM A-153 3 ⁄ 4 " Thread Diameter ( 3 / 4 -9 UNC)

18,350 lb. Rated Tensile Strength

Catalog No.

Length Min. Thread Length

Approx. Ship Weight Each

1 3 ⁄ 4 " 1 3 ⁄ 4 "

1.48 lbs. 1.580 lbs. 1.79 lbs. 2.01 lbs. 2.43 lbs. 2.85 lbs. 3.27 lbs. 3.69 lbs. 4.12 lbs. 4.54 lbs. 4.96 lbs. 5.38 lbs. 5.81 lbs. 6.24 lbs. 6.67 lbs. 7.10 lbs. .90 lbs. 1.15 lbs. 1.30 lbs. 1.44 lbs. 1.76 lbs. 2.08 lbs. 2.40 lbs. 2.84 lbs. 3.16 lbs. 3.52 lbs. 3.90 lbs. 4.25 lbs. 4.30 lbs. 4.62 lbs. 4.94 lbs. 5.27 lbs. 5.61 lbs. .65 lbs. .75 lbs. 1.09 lbs. 1.18 lbs. 1.26 lbs. 1.54 lbs. 1.62 lbs. 1.88 lbs. 2.25 lbs. 2.32 lbs. 2.52 lbs. 2.68 lbs. 3.04 lbs. 3.08 lbs. 3.23 lbs. 3.46 lbs. 3.69 lbs.

PS8902 PS8903 PS8906* PS8907*

2" 3" 6" 7" 8"

1 1 / 8 "

1 / 2 "

3" 3" 3" 4" 4" 6" 6" 6" 6" 6" 6" 6" 6" 8" 8" 3" 6" 6" 6" 6" 6" 6" 6" 6" 8" 8" 8" 8" 3" 3" 4" 4" 6" 6" 6" 6" 6" 6" 6" 6" 6" 8" 8" 2" 2"

8908* 8910* 8912* 8914* 8916* 8918* 8920* 8922* 8924* 8926* 8928 8930 8932

1 1 / 8 "

10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32"

3 / 4 " Bolt Head Size

7 ⁄ 8 " Thread Diameter ( 7 / 8 -9 UNC) *RUS Listed: c - Bolt, machine

24,500 lb. Rated Tensile Strength

PSSB780250 2 1 ⁄ 2 "

PSSB780400 PSSB780500 PSSB780600* PSSB780800*

4" 5" 6" 8"

2 1 ⁄ 2 " 2 1 ⁄ 2 "

1 5 / 16 "

19 / 32 "

PSSB781000* 10"

DF5B12* C2050254* C2050255* C2050256* C2050257* C2050258* DF5B24*

12" 14" 16" 18" 20" 22" 24"

1 5 / 16 "

7 / 8 " Bolt Head Size

PSSB782600* 26" PSSB782800* 28" PSSB783000 30" PSSB783200 32"

1 " Thread Diameter ( 1 -8 UNC) *RUS Listed: c - Bolt, machine

33,500 lb. Rated Tensile Strength

PSSB100350 3 1 ⁄ 2 "

2 1 ⁄ 2 "

1 1 / 2 "

21 / 32 "

PSSB100400 PSSB100500 PSSB100600 PSSB100800 PSSB101000 PSSB101200 PSSB101400 PSSB101600 PSSB101800 PSSB102000 PSSB102200 PSSB102400 PSSB102600 PSSB102800 PSSB103000

4" 5" 6" 8"

1 1 / 2 "

10" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30"

1" Bolt Head Size

For additional square nuts, see Catalog page 5-33

NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice. 210 N. Allen St. • Centralia, MO 65240 © 2008 Hubbell Incorporated Printed in USA ® ® POWER SYSTEMS, INC.

SUPPLEMENTAL CATALOG BULLETIN 5-53.26 December 2008

Sometimes referred to as "crossarm" bolts or "through" bolts, Hubbell Power Systems (HPS) square head and hex head machine bolts are manufactured to HPS specifications that meet the requirements of ANSI C135.1 and are avail- able in a range of thread diameters and lengths. The head is marked with an identifying "C" and the bolt includes an Bolts, Machine - Hex Head For Square Head Bolts, see previous pages.

assembled square or hex nut that corresponds to the head shape. Threads are formed with the rolled thread process. Bolt length is measured from the underside of the head to the last thread. Semi-cone point comes on bolts 8" and lon- ger in 1 ⁄ 2 ", 5 ⁄ 8 " and 3 ⁄ 4 " diameters. All others have chamfered or rounded ends. For lengths not shown, contact HPS Customer Service.

ANSI C135.1 Galvanized per ASTM A-153

1 / 2 " Thread Diameter ( 1 / 2 -13 UNC)

7,800 lb. Rated Tensile Strength

Catalog No.

Length Min. Thread Length

Approx. Ship Wt. Each

PSHB120125 1 1 ⁄ 4 " PSHB120150 1 1 ⁄ 2 " PSHB120175 1 3 ⁄ 4 "

1 1 ⁄ 4 " 1 1 ⁄ 4 " 1 1 ⁄ 4 " 1 1 ⁄ 4 " 1 1 ⁄ 4 " 1 1 ⁄ 4 " 1 1 ⁄ 4 "

.14 lbs. .15 lbs. .16 lbs. .17 lbs. .20 lbs. .23 lbs. .27 lbs. .30 lbs.

11 / 32 "

PSHB120200

2"

PSHB120250 2 1 ⁄ 2 "

3 / 4 "

27 / 32 "

PSHB120300

3"

PSHB120350 3 1 ⁄ 2 "

PSHB120400

4"

3"

1 / 2 " Bolt Head Size

5 / 8 " Thread Diameter ( 5 / 8 -11 UNC)

12,400 lb. Rated Tensile Strength

Catalog No.

Length Min. Thread Length

Approx. Ship Wt. Each

27 / 64 "

PSHB580150 1 1 ⁄ 2 " PSHB580175 1 3 ⁄ 4 " PSHB580225 2 1 ⁄ 4 " PSHB580250 2 1 ⁄ 2 " PSHB580200 2"

1 1 ⁄ 4 " 1 1 ⁄ 2 " 1 1 ⁄ 2 " 1 1 ⁄ 2 " 1 1 ⁄ 2 " 1 1 ⁄ 2 "

.33 lbs. .35 lbs. .37 lbs. .40 lbs. .43 lbs. .46 lbs. .52 lbs.

15 / 16 "

1 1 / 16 "

PSHB580300 PSHB580400

3" 4"

3 / 4 " Bolt Head Size

3"

® NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice. 210 N. Allen St. • Centralia, MO 65240 © 2008 Hubbell Incorporated                           Printed in USA ®

POWER SYSTEMS, INC.

Bolts, Double-Arming All-Thread Rods NOTE:This page replaces information on Catalog Page 5-6, dated December 2008.

SUPPLEMENTAL CATALOG BULLETIN 5-53.27 December 2008

Referred to as “D.A. bolts,” double-arming bolts are used for double arm applications (one arm on each side of the pole) because of the ease of installation if replacement of the crossarm is necessary and offer flexibility of use. Hubbell Power Systems D.A. bolts are manufactured to HPS specifications that meet the requirements of ANSI C135.1. They are available in a range of thread diameters

and lengths. Each bolt includes four assembled square nuts. Threadsare formedwith the rolled threadprocess. Bolt length is measured from the last thread, end to end. Semi-cone point comes on bolts 8" and longer in 1 ⁄ 2 ", 5 ⁄ 8 " and 3 ⁄ 4 " diameters. All others have chamfered or rounded ends. For lengths not shown, contact HPS Customer Service.

1 ⁄ 2 " Thread Diameter (1/2-13 UNC) ANSI C135.1 Galvanized per ASTM A-153

7,800 lb. Rated Tensile Strength

Approx. Ship Weight Each

Catalog Number

Length

16" 18"

1.17 lbs. 1.25 lbs.

8846 8848

5 ⁄ 8 " Thread Diameter (5/8-11 UNC)

12,400 lb. Rated Tensile Strength

Approx. Ship Weight Each

Catalog Number

Length

12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32"

1.26 lbs. 1.48 lbs. 1.70 lbs. 1.80 lbs. 1.97 lbs. 2.13 lbs. 2.27 lbs. 2.40 lbs. 2.53 lbs. 2.67 lbs. 2.80 lbs.

8862* 8864* 8866* 8868* 8870* 8872* 8874*

8876 8877 8878 8879

*RUS Listed: n - Bolt, double arming

For additional square nuts, see Catalog page 5-33

Continued on next page

NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice. 210 N. Allen St. • Centralia, MO 65240 © 2008 Hubbell Incorporated Printed in USA ® ® POWER SYSTEMS, INC.

Bolts, Double-Arming All-Thread Rods Continued from previous page. NOTE:This page replaces information on Catalog Page 5-6, dated December 2008.

SUPPLEMENTAL CATALOG BULLETIN 5-53.28 December 2008

ANSI C135.1 Galvanized per ASTM A-153 3 ⁄ 4 " Thread Diameter (3/4-10 UNC)

18,350 lb. Rated Tensile Strength

Approx. Ship Weight Each

Catalog Number

Length

6" 8"

2.83 lbs. 3.12 lbs. 3.41 lbs. 3.70 lbs. 3.99 lbs. 4.27 lbs. 4.56 lbs. 4.85 lbs. 5.14 lbs. 5.43 lbs. 5.72 lbs. 6.01 lbs. 6.30 lbs. 6.59 lbs. 6.88 lbs. 7.17 lbs. 1.28 lbs. 1.50 lbs. 1.82 lbs. 2.24 lbs. 2.48 lbs. 2.72 lbs. 2.92 lbs. 3.16 lbs 3.35 lbs. 3.56 lbs. 3.65 lbs. 3.81 lbs. 4.13 lbs. 4.34 lbs. 4.50 lbs. 4.82 lbs. 5.10 lbs. 5.41 lbs.

C2050140 C2050141

12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 12" 14" 16" 18" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42"

8882 8884 8886 8888

8890* 8892* 8894*

8896 8897 8898

889832

PS889834 PS889836 PS889838 PS889840 PS889842

*RUS Listed: n - Bolt, double arming 7 ⁄ 8 " Thread Diameter (7/8-9 UNC)

24,500 lb. Rated Tensile Strength

Approx. Ship Weight Each

Catalog Number

Length

PSDA781200 PSDA781400 PSDA781600 PSDA781800 PSDA782000 PSDA782200 PSDA782400 PSDA782600 PSDA782800 PSDA783000 PSDA783200 PSDA783400 PSDA783600 PSDA783800 PSDA784000 PSDA784200

For additional square nuts, see Catalog page 5-33

® NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice. 210 N. Allen St. • Centralia, MO 65240 © 2008 Hubbell Incorporated                           Printed in USA ®

POWER SYSTEMS, INC.

Made with FlippingBook flipbook maker