New Restaurant Guide

EQUIPMENT INSTALLATION GUIDE

Owner Operator 1. Cooler/Freezer should run 48 hours at operating temperatures prior to initial product delivery.

Cooler / Freezer Shelving

KES Installer 1. Uncrate and assemble in the appropriate box per McDonald’s plans.

Shake and Sundae Machine

KES Installer 1. Notify the FASC when they will be needed, based on site conditions upon arrival. 2. Unload and uncrate machine. 3. Place machine in appropriate location. 4. Direct electrical contractor on connection of electrical cord sets. 5. Direct plumbing contractor to make final connections of water and drain lines if water- cooled equipment is used. 6. Notify FASC to arrange start-up and conduct store training seminar.

Electrical Contractor 1. Connect electrical cord sets and verify power wiring of receptacle is correct.

Shake/Sundae FASC 1. Start-up and calibrate all shake / sundae machine, and verify motor is running in correct rotation. 2. Set up training sessions with restaurant management on proper operations and care of equipment. Owner Operator 1. Ensure that mix and syrup are in the restaurant for FASC start-up, calibration and training. 2. If final connection were not possible during installation week, arrange for start-up of machines with FASC. KES Installer 1. Notify the FASC when they will be needed, based on site conditions upon arrival. 2. Uncrate, mount casters and move into position. 3. Grill accessory packages are to be stored in one location, usually the stockroom. 4. Direct plumbing contractor to connect gas on gas grills. 5. Direct electrical contractor on wiring of power cord sets and interlock control panel. 6. Level the grill within the hood cavity per McDonald’s specifications for proper fit. 7. Once the grill has been leveled, install grill lock plates. 8. Coordinate and arrange actual start-up if final connections are possible during installation. Electrical Contractor 1. Connect exhaust fan operation control cables, complete electrical power connections and interlocks. Test interlocks 2. Connect exhaust fans. 3. Ensure that clamshell grills operate independent of one another and that each grill controls exhaust fan separately. Clamshell Grills

4.18