The UK Offshore Oil and Gas Fabricators Directory 2016
Capabilities and Capacities – Facility 1 Total Area (m²) 210,000 m 2
Fabrication Area Covered (m²)
• 8,580 m 2 consisting of four main halls • Additional fabrication area of 1,800 m 2 available for preparation and cutting workshop, assembly workshop, pipe fabrication workshop and stainless steel fabrication workshop • Specific clean workshop for super duplex projects
Assembly and Erection Area (m²)
• 22,300 m 2 • Additional 14,000 m 2 available if necessary
Cranage – Lifting Capacity and Hook Height (Tonnes and Metres)
• Workshops 1 to 4 – 2 x 30 tonnes (including five tonne auxiliary) per workshop, hook height 21 metres • Paint workshop – 2 x 10 tonnes • Preparation and cutting workshop – 2 x 10 tonnes • Assembly workshop – 1 x 16 tonnes • Pipe fabrication workshop – 1 x 10 tonnes • Stainless steel fabrication workshop – 1 x 5 tonnes • 12 tonne mobile crane and various forklifts • 126 tonne transporter • Additional cranes, self-propelled modular transporters etc, hired to suit project requirements as necessary
Load-Out Capacity (Tonnes)
14,000 tonnes, 27.5 tonnes/m 2
Minimum Water Depth (Metres)
• 200 metre quay – 3.9 metres lowest astronomical tide (LAT) • Angle load-out quay – 4.5 metres LAT
Maximum Water Depth (Metres)
• 200 metre quay – 9.5 metres mean high water springs (MHWS) • Angle load-out quay – ten metres MHWS
Dry-Dock Capability
Not applicable
page 106
THE UK OFFSHORE OIL AND GAS FABRICATORS DIRECTORY 2016
Made with FlippingBook