The UK Offshore Oil and Gas Fabricators Directory 2016

Capabilities and Capacities – Facility 2, Ship Repair Total Area (m²) 81,000 m 2

Fabrication Area Covered (m²)

1,200 m 2

Assembly and Erection Area (m²)

25,000 m 2

Cranage – Lifting Capacity and Hook Height (Tonnes and Metres)

Workshop • 25 tonne Gantry Crane

Dry Dock • 1 x 80 tonne at 38 metre Tower Crane • 1 x 40 tonne at 25 metre Tower Crane • 1 x 40 tonne at 25 metre Tower Crane

Quayside • 1 x 40 tonne at 30 metre Tower Crane

Load-Out Capacity (Tonnes)

• Up to 30,000 tonnes via skidding on quayside • Multi-wheel transporters capable of handling up to 780 tonnes. Additional transporters hired as necessary

Minimum Water Depth (Metres) Maximum Water Depth (Metres)

8.6 metres

11.6 metres

Dry-Dock Capability

• 335 metres x 50 metres x 14.75 metres (Belfast Dock) • 333 tonnes/metre or 10.94 tonnes/m 2 load capacity

Other e.g. Licences, Permissions, Warehouse and Storage Size, Engineering, Electrical and Joiners Workshop Size, etc.

• Quay facilities – 432 metres • Access is via the Victoria Channel: - Minimum water depth 7.8 metres CD - Width = 152.4 metres - No height restrictions on route to open water • Licensed for slops reception (1,500 tonnes) • Licensed for open grit blasting • ISPS accredited • Design engineering department in-house • Structure decommissioning • FPAL Verified N.B: Both yards are 0.5 miles apart and are connected by a harbour authority road. Therefore, all workshops and services within each are shared and can be used regardless of where the project is located.

page 70

THE UK OFFSHORE OIL AND GAS FABRICATORS DIRECTORY 2016