Emergency Shower and Eyewash Stations Datasheets

Product Datasheet

H- D5016 Indoor Unheated Emergency Safety Shower Floor mounted unheated emergency safety shower with optional stainless steel eye/face wash unit. ANSI compliant model ideal for use in indoor applications not subject to the possibility of freezing or overheating. Delivers the ANSI recommended 76 litres per minute of potable water from the shower and 12 litres per minute to the eye/face wash. Available with galvanised powder coated mild steel pipework.

Shown with optional eye/face wash bowl (Part No. H- DA002) Foot treadle (Part no. H- DA003)

Specifications

MATERIALS OF CONSTRUCTION PIPEWORK AND FITTINGS

Galvanised powder coated mild steel with 150lb medium wall tubulars and fittings

OPERATING VALVES

Chrome plated brass, two piece stay open valve

SHOWER SPRAY OUTLET EYE/FACE WASH BOWL/LID

Nylon 6 nozzle Stainless steel

EYE WASH DIFFUSERS

Chrome plated brass with stainless steel mesh

STANDARD FINISH

Green powder coated

SERVICES WATER INLET

1 1 / 4 ” Female BSP

DESIGN OPERATING PRESSURE

2.0 to 6 BAR G (29 to 87 PSI)

TEST PRESSURE

10.3 BAR G (149 PSI)

MINIMUM FLOW AT OPERATING PRESSURE ENVIRONMENTAL OPERATING TEMPERATURE MINIMUM AMBIENT OPERATING TEMPERATURE MAXIMUM AMBIENT OPERATING TEMPERATURE

Shower: 76 litres/minute minimum (20 US Gallons). Eye/face wash: 12 litres/minute minimum (3 US Gallons)

5º C (41º F) 35º C (95º F)

OPERATIONAL SHOWER SPRAY OPERATION EYE/FACE WASH OPERATION

Pull handle

Push plate or foot panel activation

WEIGHTS and DIMENSIONS DIMENSIONS - STANDARD ORIENTATION (WxDxH)

310mm (12.2in) x 840mm (33in) x 2100mm (82.6in)

WEIGHT (NO OPTIONS)

16kg (35lb)

Product Datasheet - G.A. Drawings

H- D5016 - Indoor Unheated Emergency Safety Shower

4

6

7

3

5

AS BROKEN DOWN FOR SHIPPING

670

ABS SHOWER ROSE

633.50

SHOWER HAND CONTROL

1149

1186.50

1-1/4 INCH BSP FEMAIL INLET

283

0

159

LOOSE CHAIN

1112.25

TREADLE ASSEM

B

B

150

100

4 HOLES 15

150 SECTION B-B SCALE 1 : 15

REV

DRAWN

REASON

A

NS

1st Release

TITLE:

DATE

NAME

DEBUR AND BREAK SHARP EDGES

GALVANISED COMBINATION SHOWER -WITH E GRP TREADLE

NS

08/06/2018

APPROVED: CHECKED: DRAWN: MATERIAL:

DIMENSIONS ARE IN MILLIMETRES UNLESS SPECIFIED OTHERWISE

TOLERANCES LINEAR: ANGULAR:

10mm > 1000mm / 5mm < 1000mm 0.5

DWG NO.

FINISH:

SCALE:1:20 @ A3

GALVANISED MILD STEEL

SHEET 1 OF 2

CLEAN

3

Product Datasheet

H- D5016 C Indoor Unheated Emergency Safety Shower Floor mounted unheated emergency safety shower with optional stainless steel eye/face wash unit. ANSI compliant model ideal for use in indoor applications not subject to the possibility of freezing or overheating. Delivers the ANSI recommended 76 litres per minute of potable water from the shower and 12 litres per minute to the eye/face wash. Available with galvanised powder coated mild steel pipework.

Shown with optional foot treadle (Part no. H- DA003)

Specifications

MATERIALS OF CONSTRUCTION PIPEWORK AND FITTINGS

Galvanised powder coated mild steel with 150lb medium wall tubulars and fittings

OPERATING VALVES

Chrome plated brass, two piece stay open valve

SHOWER SPRAY OUTLET EYE/FACE WASH BOWL/LID

Nylon 6 nozzle Stainless steel

EYE WASH DIFFUSERS

Chrome plated brass with stainless steel mesh

STANDARD FINISH

Green powder coated

SERVICES WATER INLET

1 1 / 4 ” Female BSP

DESIGN OPERATING PRESSURE

2.0 to 6 BAR G (29 to 87 PSI)

TEST PRESSURE

10.3 BAR G (149 PSI)

MINIMUM FLOW AT OPERATING PRESSURE ENVIRONMENTAL OPERATING TEMPERATURE MINIMUM AMBIENT OPERATING TEMPERATURE MAXIMUM AMBIENT OPERATING TEMPERATURE

Shower: 76 litres/minute minimum (20 US Gallons). Eye/face wash: 12 litres/minute minimum (3 US Gallons)

5º C (41º F) 35º C (95º F)

OPERATIONAL SHOWER SPRAY OPERATION EYE/FACE WASH OPERATION

Pull handle

Push plate or foot panel activation

WEIGHTS and DIMENSIONS DIMENSIONS - STANDARD ORIENTATION (WxDxH)

310mm (12.2in) x 840mm (33in) x 2100mm (82.6in)

WEIGHT (NO OPTIONS)

16kg (35lb)

Product Datasheet - G.A. Drawings

H- D5016 C Indoor Unheated Emergency Safety Shower

PROJECTION

PROJECTION

AS BROKEN DOWN FOR SHIPPI

PROJECTION

816

715

AS BROKEN DOWN FOR SHIPPI

OPTIONAL HIGH LEVEL 1 1/4" INLET (PLUGED) OPTIONAL HIGH LEVEL 1 1/4" INLET (PLUGED) 627

AS BROKEN DOWN FOR SHIPPING

627

816

715

816

715

OPTIONAL HIGH LEVEL 1 1/4" INLET (PLUGED)

627

SELF DRAINING SPRAY NOZZLE (60° ANGLE) SELF DRAINING SPRAY NOZZLE (60° ANGLE)

SELF DRAINING SPRAY NOZZLE (60° ANGLE)

253

253

253

SHOWER HAND CONTROL

SHOWER HAND CONTROL SHOWER HAND CONTROL

1109 1168

1-1/4 INCH BSP FEMAIL INLET

1-1/4 INCH BSP FEMAIL INLET

2323

2260

1-1/4 INCH BSP FEMALE DRAIN INLET (PLUGED)

2138 1-1/4 INCH BSP FEMAIL INLET

250

2323

2260

1-1/4 INCH BSP FEMALE DRAIN INLET (PLUGED) 1-1/4 INCH BSP FEMALE DRAIN INLET (PLUGED) 1136

2138

2323

159

2260

2138

250

250

1-1/4 INCH BSP FEMALE DRAIN OUTLET (PLUGED)

159

B

B

1136

159

1136

100 150

1-1/4 INCH BSP FEMALE DRAIN OUTLET (PLUGED) 1-1/4 INCH BSP FEMALE DRAIN OUTLET (PLUGED)

4 HOLES 15

B

B

100 SECTION B-B SCALE 1 : 15 B

150

B

100 150

100 150

Approved

4 HOLES 15

REV DRAWN REASON

4 HOLES 15

A NS 1st Release

100 SECTION B-B SCALE 1 : 15 100 SECTION B-B SCALE 1 : 15

150

150

Approved Approved

REV DRAWN REASON

REV DRAWN REASON

A NS 1st Release

A NS 1st Release

Product Datasheet

H- D5017 Indoor Unheated Emergency Safety Shower Floor mounted unheated emergency safety shower with optional stainless steel eye/face wash unit. ANSI compliant model ideal for use in indoor applications not subject to the possibility of freezing or overheating. Delivers the ANSI recommended 76 litres per minute of potable water from the shower and 12 litres per minute to the eye/face wash Available with stainless steel pipework.

Shown with optional eye/face wash bowl (Part No. H- DA001)and Foot T readle (Part no. H- DA003)

Specifications

MATERIALS OF CONSTRUCTION PIPEWORK AND FITTINGS

304L stainless steel with 150lb medium wall tubulars and fittings

OPERATING VALVES

316L stainless steel

SHOWER SPRAY OUTLET EYE/FACE WASH BOWL/LID

Nylon 6 nozzle

304L stainless steel

EYE WASH DIFFUSERS

Chrome plated brass with stainless steel mesh

STANDARD FINISH

Brushed finish

SERVICES WATER INLET

1 1 / 4 ” Female BSP

DESIGN OPERATING PRESSURE

2.0 to 6 BAR G (29 to 87 PSI)

TEST PRESSURE

10.3 BAR G (149 PSI)

MINIMUM FLOW AT OPERATING PRESSURE ENVIRONMENTAL OPERATING TEMPERATURE MINIMUM AMBIENT OPERATING TEMPERATURE MAXIMUM AMBIENT OPERATING TEMPERATURE

Shower: 76 litres/minute minimum (20 US Gallons). Eye/face wash: 12 litres/minute minimum (3 US Gallons)

5º C (41º F) 35º C (95º F)

OPERATIONAL SHOWER SPRAY OPERATION EYE/FACE WASH OPERATION

Pull handle

Push plate or foot panel activation

WEIGHTS and DIMENSIONS DIMENSIONS - STANDARD ORIENTATION (WxDxH)

310mm (12.2in) x 840mm (33in) x 2100mm (82.6in)

WEIGHT (NO OPTIONS)

16kg (35lb)

Product Datasheet - G.A. Drawings

H- D5017 - Indoor Unheated Emergency Safety Shower

4

6

7

3

5

AS BROKEN DOWN FOR SHIPPING

670

ABS SHOWER ROSE

633.50

SHOWER HAND CONTROL

1149

1186.50

1-1/4 INCH BSP FEMAIL INLET

283

0

159

LOOSE CHAIN

1112.25

TREADLE ASSEM

B

B

150

100

4 HOLES 15

150 SECTION B-B SCALE 1 : 15

REV

DRAWN

REASON

A

NS

1st Release

TITLE:

DATE

NAME

DEBUR AND BREAK SHARP EDGES

GALVANISED COMBINATION SHOWER -WITH E GRP TREADLE

NS

08/06/2018

APPROVED: CHECKED: DRAWN: MATERIAL:

DIMENSIONS ARE IN MILLIMETRES UNLESS SPECIFIED OTHERWISE

TOLERANCES LINEAR: ANGULAR:

10mm > 1000mm / 5mm < 1000mm 0.5

DWG NO.

FINISH:

SCALE:1:20 @ A3

GALVANISED MILD STEEL

SHEET 1 OF 2

CLEAN

3

Product Datasheet

H- D5017 C Indoor Unheated Emergency Safety Shower Floor mounted unheated emergency safety shower with optional stainless steel eye/face wash unit. ANSI compliant model ideal for use in indoor applications not subject to the possibility of freezing or overheating. Delivers the ANSI recommended 76 litres per minute of potable water from the shower and 12 litres per minute to the eye/face wash Available with stainless steel pipework.

Shown with optional foot treadle (Part no. H- DA003)

Specifications

MATERIALS OF CONSTRUCTION PIPEWORK AND FITTINGS

304L stainless steel with 150lb medium wall tubulars and fittings

OPERATING VALVES

316L stainless steel

SHOWER SPRAY OUTLET EYE/FACE WASH BOWL/LID

Nylon 6 nozzle

304L stainless steel

EYE WASH DIFFUSERS

Chrome plated brass with stainless steel mesh

STANDARD FINISH

Brushed finish

SERVICES WATER INLET

1 1 / 4 ” Female BSP

DESIGN OPERATING PRESSURE

2.0 to 6 BAR G (29 to 87 PSI)

TEST PRESSURE

10.3 BAR G (149 PSI)

MINIMUM FLOW AT OPERATING PRESSURE ENVIRONMENTAL OPERATING TEMPERATURE MINIMUM AMBIENT OPERATING TEMPERATURE MAXIMUM AMBIENT OPERATING TEMPERATURE

Shower: 76 litres/minute minimum (20 US Gallons). Eye/face wash: 12 litres/minute minimum (3 US Gallons)

5º C (41º F) 35º C (95º F)

OPERATIONAL SHOWER SPRAY OPERATION EYE/FACE WASH OPERATION

Pull handle

Push plate or foot panel activation

WEIGHTS and DIMENSIONS DIMENSIONS - STANDARD ORIENTATION (WxDxH)

310mm (12.2in) x 840mm (33in) x 2100mm (82.6in)

WEIGHT (NO OPTIONS)

16kg (35lb)

Product Datasheet - G.A. Drawings

H- D5017 C - Indoor Unheated Emergency Safety Shower

PROJECTION

782.63 PROJECTION

AS SHIPPED

682

632

PROJECTION

TOP ARM

OPTIONAL HIGH LEVEL 1 1/4" INLET (PLUGED)

782.63

AS SHIPPED

682

632

782.63

AS SHIPPED

TOP ARM

OPTIONAL HIGH LEVEL 1 1/4" INLET (PLUGED)

682

632

TOP ARM

OPTIONAL HIGH LEVEL 1 1/4" INLET (PLUGED)

253

PICTOGRAPH SIGN 253

PICTOGRAPH SIGN

PULL ROD ASSEM PULL ROD ASSEM 253

1168 1072

1168 1072

PICTOGRAPH SIGN

MID LEVEL 1 1/4" INLET

PULL ROD ASSEM

MID LEVEL 1 1/4" INLET

1168 1072

EYEFACE WASH ASSEM EYEFACE WASH ASSEM

2305

2241

2241 1-1/4 INCH BPS FEMALE DRAIN INLET (PLUGED)

2305

2118

1-1/4 INCH BPS FEMALE DRAIN INLET (PLUGED) MID LEVEL 1 1/4" INLET

2118

EYEFACE WASH ASSEM

2305

2241

1-1/4 INCH BPS FEMALE DRAIN INLET (PLUGED)

1125

2118

1032

1125

1032 1-1/4 INCH BPS FEMALE DRAIN OUTLET (PLUGED)

B

B

1-1/4 INCH BPS FEMALE DRAIN OUTLET (PLUGED)

100 150

1125

B

B

1032

4 HOLES 15

1-1/4 INCH BPS FEMALE DRAIN OUTLET (PLUGED)

100

150

100 150

SECTION B-B SCALE 1 : 15 B

B

4 HOLES 15

100

150

100 150

SECTION B-B SCALE 1 : 15

4 HOLES 15

REV DRAWN REASON

100

150

A NS 1st Release

SECTION B-B SCALE 1 : 15

REV DRAWN REASON

A NS 1st Release

REV DRAWN REASON

A NS 1st Release

Product Datasheet

H- D5020CP /CPG Emergency Eye/Face Wash

Open stainless steel bowl, wall-mounted emergency eye/face wash featuring twin spray nozzles protected by dust covers which lift off upon activation via the push plate. The flow regulator valve guarantees an optimum water flow The eye wash diffusers are fitted with fine mesh strainers designed to give a gentle flow of aerated water at 12 litres per minute as per the ANSI standard. This unit is intended for indoor use but can be located outdoors where there is no risk of overheating or freezing.

Pedestal mounting options also available.

Specifications MATERIALS OF CONSTRUCTION EYE/FACE WASH BOWL/PIPEWORK

304L stainless steel

SERVICES WATER INLET

1/2” Male BSP

DESIGN OPERATING PRESSURE

2.0 to 6 BAR G (29 to 87 PSI)

MINIMUM FLOW RATES

12 litres/minute minimum (3 US Gallons)

ENVIRONMENTAL OPERATING TEMPERATURE MINIMUM AMBIENT OPERATING TEMPERATURE MAXIMUM AMBIENT OPERATING TEMPERATURE

5º C (41º F) 35º C (95º F)

OPERATIONAL EYE/FACE WASH OPERATION

Push plate operated

WEIGHTS and DIMENSIONS DIMENSIONS - STANDARD ORIENTATION (WxDxH)

380mm (14.9in) x 300mm (11.8in) x 230mm (9in)

WEIGHT (NO OPTIONS)

4kg (9lb)

Product Datasheet - G.A. Drawings

H -D5020CP / CP G Emergency Eye/Face Wash - Plumbed in PROJECTION

178

PUSH FLAG OPERATION

POP OFF DUST COVERS

D

231

1/2" INLET

32

362

303

D

SECTION D-D

DWG NO. D5020

x2 9 THRU

TITLE:

16LPM FLOW REGULATOR

SS OPEN BOWL WALL MOUNTE

90

SCALE: 1:5 @ A3

125

SHEET 1 OF 2

NAME

DATE

NS

03/01/2019 31/01/2019 31/01/2019

DEBURANDBREAK SHARP EDGES APPROVED: CHECKED: DRAWN: NS NS

D S H S T E

Approved

A NS 1st Release - - - - - - REV DRAWN REASON

Pedestal Mounting Options

Part Code Type DA005

GRP Pedestal

DA006

Stainless-steel pedestal

Product Datasheet CHROME PLATED BRASS BALL VALVE for Emergency Safety Showers & Eye/Face Washes Optional Fittings

For use with emergency safety showers and eye/face wash units, the brass ball valve is designed to comply with ANSI Z358.1-2014 and EN15154 and certified to DIN EN 13828 and W 570-1. The valve features a bore in the ball to prevent build up of biofilm by allowing trapped water to be flushed away. The lever design offers integrated pick up points for proximity/limit switch activation.

Specifications

TECHNICAL DATA NOMINAL PRESSURE

PN40 according to size and temperature

TEMPERATURE

-30 C up to +220 C according to pressure

THREADS

Female/female threads, ISO 228/1

MATERIALS OF CONSTRUCTION VALVE HOUSING - BODY, BALL and STEM

Chrome plated brass

- LEVER

Glass reinforced nylon 6

GASKETS - BALL GASKET - STEM PACKING

PTFE PTFE with packing gland

1. Female/Female 316L Stainless-Steel Ball Valve 2. 316L Stainess-Steel Stop Plate 3. 4 Inch Red Nylon Valve Lever 4. Centre Cap for Valve Lever 5. M10 Red Nylon Nut with 19mm Head for Valve Lever

Hughes Safety Showers Ltd, Whitefield Road, Bredbury, Stockport SK6 2SS UK. Email: sales@hughes-safety.com Tel: +44 (0)161 430 6618 Registered No. 0939240. VAT Registration No. 918 5005 32. Hughes Safety Showers Ltd is a Justrite Group Company.

Product Datasheet STAINLESS-STEEL BALL VALVE for Emergency Safety Showers & Eye/Face Washes Optional Fittings

For use with emergency safety showers and eye/face washes, the 316L stainless-steel ball valve is designed to comply with ANSI Z358.1-2014 and EN15154 and certified to DIN EN 13828 and W 570-1. The valve features a bore in the ball to prevent build up of biofilm by allowing trapped water to be flushed away. The lever design offers integrated pick up points for proximity/limit switch activation.

Specifications

TECHNICAL DATA NOMINAL PRESSURE

PN40 according to size and temperature

TEMPERATURE

-30 C up to +220 C according to pressure

THREADS

Female/female threads, ISO 228/1

MATERIALS OF CONSTRUCTION VALVE HOUSING - BODY, BALL and STEM

316L stainless-steel

- LEVER

Glass reinforced nylon 6

GASKETS - BALL GASKET - STEM PACKING

PTFE PTFE with packing gland

1. Female/Female 316L Stainless-Steel Ball Valve 2. 316L Stainess-Steel Stop Plate 3. 4 Inch Red Nylon Valve Lever 4. Centre Cap for Valve Lever 5. M10 Red Nylon Nut with 19mm Head for Valve Lever

Hughes Safety Showers Ltd, Whitefield Road, Bredbury, Stockport SK6 2SS UK. Email: sales@hughes-safety.com Tel: +44 (0)161 430 6618 Registered No. 0939240. VAT Registration No. 918 5005 32. Hughes Safety Showers Ltd is a Justrite Group Company.

Product Datasheet

PORTAdec 500 Portable Decontamination Misting Shower

Multi-nozzle misting decontamination shower can kill the COVID-19 virus instantly upon application to skin, clothes and personal protective equipment when used in conjunction with the appropriate non-toxic disinfectant. Featuring a self-sanitising mat at the base of the unit, this portable solution offers top to toe decontamination.

• Suitable for decontamination of PPE or within hygiene facilities for the general public • Zipped sides allow for set-up as a walk-through unit or step-in/step-out • Quickly deployed in under 4 minutes • Potential to decontaminate around 700 users per cylinder*

• Foot operated activation for ease of use • Packed in a transportable case on wheels

Specifications

MATERIALS OF CONSTRUCTION OUTER COVER

Polyester (washable up to 50C) with PVC flooring

FRAME

Aluminium

SERVICES SUPPLY PRESSURE

3 to 6 Bar

1 /

WATER INLET

2 inch

DIMENSIONS (HxWxD) FULLY ASSEMBLED PACKED

2350mm x 950mm x 950mm 1600mm x 390mm x 390mm

15 LITRE CYLINDER DISINFECTANT/DRYING ZONE MAT SANITISING MAT

730mm x 220mm 3000mm x 900mm 690mm x 870mm

WEIGHT FRAME AND COVER CARRY CASE

13.5kg 3kg (16.5kg total when packed)

Supplied as standard: Misting shower (includes frame and machine washable cover within carry case) 15 litre cylinder for remote operation High pressure hand pump to pressurize cylinder Sanitising mat and demarcation zone mat

Options: Weights to secure base of frame Additional cylinder to ensure continuous operation when a refill is required Spare nozzle kit Venturi/disinfectant mixer for use with mains water supply

* Based on 5 second use per person

www.hughes-safety.com

Made with FlippingBook - Online Brochure Maker