Lincoln-MKT-Owner-Manual

Doors and Locks

Hints: • Do not set a code that uses five of the same number. • Do not use five numbers in sequential order. • The factory-set code works even if you have set your own personal code. Recalling Memory Positions (If Equipped) The programmed entry codes recall driver memory positions as follows: • Entry code 1 recalls driver 1 memory positions. • Entry code 2 recalls driver 2 memory positions. • Entry code 3 recalls driver 3 memory positions. Note: Personal entry codes 4 and 5 will not

You can operate the keypad with the factory-set five-digit entry code. The code is on the owner’s wallet card in the glove box and is available from an authorized dealer. You can also program up to five of your own five-digit personal entry codes. Programming a Personal Entry Code 1. Enter the factory-set five-digit code. 2. Press 1·2 on the keypad within five seconds. 3. Enter your personal five-digit code. You must enter each number within five seconds of each other. 4. Press 1·2 on the keypad to save personal code 1. The doors lock then unlock to confirm that programming was successful. To program additional personal entry codes, repeat steps 1 through 3, then for step 4: • Press 3·4 to save personal code 2. • Press 5·6 to save personal code 3. • Press 7·8 to save personal code 4. • Press 9·0 to save personal code 5.

E138637

You can use the keypad to do the following: • Lock or unlock the doors. • Program and erase user codes. • Arm and disarm the anti-theft alarm. • Recall memory seat and mirror positions.

recall memory positions. Erasing a Personal Code

1. Enter the factory-set five-digit code. 2. Press and release 1·2 on the keypad within five seconds.

76

MKT (TP4) , enUSA, Edition date: 201703, First Printing