EoW March 2008

wire

31 March-04 April

➣➢➣ carbon steel wires and cables and special stranders for flat copper wires. Its ‘MegaLogos’ high carbon steel drawing machine, charac- terised by an ergonomic horizontal 1,270mm diameter capstan, really is a machine for the future.

PC strand wire, CO 2

welding wire, Al clad wire,

DCM Industries Inc 09 F05-04

plating wire and collated nail wire.

Visitors will be able to gain information on the following items: Acid-free rod cleaning; in-line dry preparation and wire full film lubrication (physical separation at wire/die interface), offer a total saving of 50-64% in production of H/C wire, enabling 5.5mm diameter 0.85%C bare rod to be drawn directly with an output of 2.2 ton/hour – by DCCD system. (LVC) revolutionises wire lubrication and enables drawing at virtually no speed limitation. LVC is a unique dry coating process performing a hard lubricant coat for H/C spring wire and a light water soluble coat for plating wire, enabling ‘frictionless’ drawing with die wear of 0.20micron/ton of wire drawn. completely eliminated for all H/C and L/C applications including 0.88%C mechanically descaled bare rod. Spring wire is drawn at 18ms (3,600ft/ min) – by LVC/PDH system Wire cleaning: Drawn wire in smooth bright finish for ‘plating’ quality, in-line, at 12ms (2,400ft/min). Hermetically sealed ‘zero emission’ system, operating with a wide variety of environmentally friendly cleaning mediums containing the new rust preventive additives, supplies clean and polished wire of reflective appearance – by PWC system Lubricant viscosity control Pre-coating chemicals are

DCM Industries Inc has again led the way in developing test solutions for the LAN cable industry. The Alien Crosstalk option to the DCM model CMS-2XLD cable measuring system enables cable producers to accurately test production cables according to the new Augmented CAT 6 cabling standards. As a result of this innovation, DCM has received new CMS-2XLD orders from China, Korea, Japan, Taiwan and the United States.

Continuus Properzi – Italy Fax : +39 02 58 310482 Email : hq@properzi.com Website : www.properzi.com

Coremo Ocmea Srl 9 F64

Coremo Ocmea manufactures a wide range of brakes and clutches which are used extensively in the wire and cable industry worldwide. Products in Düsseldorf will include caliper disc brakes, low inertia brakes and clutches, radial drum brakes and air cooled brakes, including the new EL caliper which allows side mounting of the brake without additional mounting brackets on big wire stranders and cable laying-up machines.

DCM Industries, Inc – USA Fax : +1 510 670 7212

Email : dcmsales@dcmindustries.com Website : www.dcmindustries.com

Decalub 10 E72

Decalub will be highlighting its DCCD process and equipment for acid-free steel rod cleaning and in-line dry preparation at virtually zero energy consumption in applications including spring wire, high-tensile rope wire, bead wire,

Coremo Ocmea Srl – Italy Fax : +39 02 4881940 Email : coremo@ocmea.it Website : www.ocmea.it

➣➢➣

112

EuroWire – March 2008