EoW March 2008

wire

31 March-04 April

machines to the wire industry will be jointly exhibiting at the show. Ideal-Werk will present a wire mesh welding machine, type GA0 516, having a portal width of 1.60m for the production of industrial mesh, eg display articles. The design of the machine is made to assure high flexibility and short change-over times. High welding performance and utmost flexibility offers the customer a considerable reduction of welding cost and down times. Ideal will also show various models of butt welding machines for solid wires and strands, for all kinds of ferrous and non-ferrous material used in wire drawing mills, for cable manufacturing and in the wire working industry. Ideal and Clifford Welding Systems will demonstrate their NC jig welding machine type Versaweld CSR 050 which is used for the flexible production of small and medium quantities of wire products within jig frames. Clifford will also demonstrate its capability in the reinforcement and off-coil line wire and crosswire mesh production line areas. The company manufactures a comprehen- sive range of mesh production machines covering high production reinforcing lines,

Håmex Hårdmetallverktyg AB 10 F75

Hasemann Maschinen 11 A39

Since 1987 Hasemann Maschinen has specialised in the worldwide purchase and supply of highest quality used machinery for the processing and treatment of steel and non-ferrous products, such as semi-finished bright steel bars, tubes and wires. Founder Dieter Hasemann, who still has an advistory role, has more than 35 years’ experience in the business. Since 2007, Ms Andrea Hasemann and Mr Ingo Dierkes have run the company. Mr Dierkes handles purchasing and sales, while Ms Hasemann continues to be responsible for office administration. Hasemann Maschinen – Germany Fax : +49 2131 792620 Email : info@hasemann-maschinen.de Website : www.hasemann-maschinen.de

Håmex will show its complete range of exchangeable tungsten carbide inserts for dies and cutters. These eliminate the need for regrinding and allow replacements instead of the tools having to be scrapped. The patended dies have a rotatable and exchangeable insert of tungsten carbide with up to three profiles. Changing from one profile to another can be done very quickly, which allows three nail dimensions to be manufactured with minimum set-up times. The cutters have an exchangeable insert with two cutting profiles. When worn to a certain level, the insert is turned 90 degrees to a new cutting profile.When both cutting sides areworn out, a new insert can be fitted to the holder. The complete programme of tungsten carbide tools for nail manufacturing also consists of cutters for Enkotec machines and chisel feeders, cutters, punches and wire guides for Wafios N90 machines. Håmex Hårdmetallverktyg AB – Sweden Fax : +46 13 357660 Email : info@hamex.se Website : www.hamex.se

Ideal-Werk, Clifford Welding Systems Ltd 11 H06, 11 H05

Ideal-Werk, of Germany, and Clifford Welding Systems, of South Africa, who supply welding

142

EuroWire – March 2008