WCA March 2012

wire 2012

Photo courtesy Rene Tillmann ©

íí

samples with outstanding accuracy (capacitance 0.2%, tan 1x10-5) and stability. The graphical user interface of the instrument is highly intuitive, is focussed on convenience with built-in useful programs and uses a large colour touch screen as the input device. While the manual mode provides quick measurements, the automatic test mode supports complete programmed and automated test sequences according to selectable standards. Advanced software and hardware functionalities such as defining up to ten cells, heating two test cells at the same time and graphical visualisation of measured data make this instrument a powerful tool for analysis of high-voltage insulating materials. The instrument incorporates standard USB and ethernet interfaces which enable easy exchange of measurement results, related settings, etc for further analysis or reporting. Haefely Test AG – Switzerland Fax : +41 613 734 912 Lukas Anlagenbau GmbH is a global supplier of machinery for the wire and cable industry, located in Albersrieth ( Factory 1) and Vohenstrauß ( Factory 2 ), Germany. It is known for its high quality and high preci- sion products, and provides both standard machinery and customised solutions. The company was established in Albersrieth in 1959, and originally manufactured electrical switchgear and switching equipment. In 1971, it developed and started production of electrical equipment for drawing machines and take-ups for cables. Production was further expanded, and since 1984 the firm has supplied complete lines of machines for manufacturing wires, cables and associ- ated accessories. In 1997 a new production and administration building was established in Vohenstrauß. A vertical taping line with vertical in-line sintering oven will be exhibited at wire 2012. The line is suitable for nearly all kinds of tape, such as PTFE, Kapton, mica, polyester, fleece, laminated tapes and metal tapes. High speed and precision taping is enabled by a closed loop tape tension control and a very precise speed synchronisation between the capstan and the taping heads. Email : sales@haefely.com Website : www.haefely.com Lukas Anlagenbau GmbH Stand: 12B61

In the workshop GMP Slovakia also manufactures different pallets, racks, stands and many different products of metal carpentry. GMP Slovakia Sro – Italy Fax : +39 030 957 9689
 Email : sales@gmp-slovakia.com
 Website : www.gmp-slovakia.com ❍ GMP Slovakia – a leading steel reel producer The Tettex 2830/2831 is designed to test dielectric properties of liquid and solid insulating materials. It incorporates a fast and highly advanced procedure to measure Capacitance and tan, DC resistance and relative permittivity or (dielectric constant) of liquid or solid insulating materials. A simple one-time-connection system together with resistance measurement according to pre-selectable standards drastically reduces measuring time. The instrument works on the principle of a combined bridge-vector-meter and is capable of analysing capacitance and resistivity on oil and solid insulating Haefely Test AG Stand: 12E74

Depending on the application, the line can be equipped with a cooling unit for the taping area or equipment for quality control. Equipment for remote control via Internet can also be provided. Lukas Anlagenbau GmbH – Germany Fax : +49 9651 930 299 Email : lukas.voh@lukas-anlagenbau.de Website : www.lukas-anlagenbau.de Medek & Schörner Stand: 10A56-01 Medek & Schörner will be presenting and demonstrating the following high- performance cable marking machines at wire 2012. Cable marking machines: • High quality gravure printers (LAN cables, control cables, etc) for speeds up to 1,200m/min • Water misting unit for the application of fine water dust for pre-cooling of the hot wire immediately after the extruder • Embossing metre markers/hot foil sequential meter markers for highest accuracy of length measurement (power cables, telecommunication cables, optical fibre cables, etc) • High performance ring markers for marking telephone wires, switchboard wires, automotive cables, LAN cables • Video system for monitoring the print quality of fast-running cable printing machines, eg allowing real-time inspec- tion for bad quality and/or missing prints • Laser marking system for cables Optical fibre coating systems: • Top speed optical fibre processing systems • Optical fibre colour coding up to 3,000m/min • Ring marking of optical fibres • Tight buffering up to 1,300m/min • Fibre ribbon production with excellent ribbon planarity and for speeds up to 1,000m/min • CFU production of compact fibre units ❍ Lukas Anlagenbau will present its manufacturing solutions at wire 2012

❍ The Tettex from Haefely

îî

wire 2012 - New Products on show March 26 th – 30 th

88