Valeoscope - Clutch Hydraulics CSC CMC CRC 998123

Trace of hydraulic fluid on CMC

2

l There is a leak from the surface of the push rod coming out of the piston or from the connectors top image. In such a case, the clutch master cylin- der may also leak fluid inside the car. Check also any trace of hydraulic fluid behind the pedal area. If you change the clutch master cylinder, it is recommended to change the slave cylinder at the same time, as both units typically fail around the same time.

3

The clutch release cylinder (CRC) may need to be replaced if: l The push rod does not return correctly when com- pressed right image It is difficult and not recommended to measure effective stroke of the receiver rod as the stroke of the piston is different for each application. l There is leakage from the surface of the rod coming from the piston or from the connectors

19