CADDManual_2016-FINAL.pub

Architecture & MEP Standards Engineering & Energy Standards Environmental Standards Survey Standards REVIT GIS Microstation. General Standards

→ Xref Standards

 Reference type: Overlay (as opposed to "Attachment" type) ▪ Prevents the xref from tagging along as a nested xref when the host drawing is referenced by another file. ▪ Best method is to choose this type when you initially attach the reference ▪ If you forget and attach it as an "Attachment" type reference, you can change it afterward in the Xref Manager.  File path type: No Path – Preferred or if necessary can use Relative (which is "partially specified folder path that assumes the current drive letter or folder of the host drawing") Full path is only allowed when a reference to another project is required. ▪ Best method is to choose this type of attachment when you initially overlay the reference ▪ Helps to prevents loss of xref data when drawing is moved to a different location (examples: record\out or outside BL) ▪ Prevents drawing from accidentally reading the xref from an unintended location.  Binding of References ▪ Unless otherwise instructed to by a client, NEVER bind any external reference (xref) into other files. Doing so generates a large MESS of un-needed information that is difficult to manage on the working drawing and the workflow downstream. Please coordinate within your department on the need. If in question, use E-transmit and let the recipient manage the packaged data as they require.

> > > Page 2 // Section 4