Superior Die Springs

SERVING THE DIE & MOLD BUILDING INDUSTRIES

®

DIE SPRINGS

HIGH STRENGTH CHROMIUM ALLOYS Color Coded

DIE SPRING FEATURES AND BENEFITS

Raymond Die Springs Offer

Features

Benefits

Superior Materials & Wire Profile

• All Raymond die springs are made from high tensile strength chromium alloy steels. • Optimal wire cross section. • Spring ends are ground square. • Other raw materials are available for special conditions and environments.

• Inherent toughness to withstand heavy load demands.  • Superior performance in high stress applications. • Heat resistance up to 350°F. • Readily available, cost efficient raw material. • Consistent controlled metallurgy. • Offers maximum design possibilities. • Wire cross section provides optimum deflection and protection against failure due to excessive stress build-up. • Square ends create reliable, flat, maximum load-bearing surface. • Specialty materials available to meet customer requirements. • Provides uniform spring performance. • Insures consistent rate recordings. • Greater load accuracy at a given test height. • Certainty that OD will work freely in prescribed hole and ID will work freely over prescribed rod. • Raymond assurance of the highest production and quality standards. • Reliable performance engineered into every Raymond die spring. • Reliable, trouble-free performance. • Increased fatigue life by as much as 30%. • Reduced spring breakage. • Uniform performance over a longer lifetime. • More cost effective. • Extra performance margins.

Dimensional Consistency

• Dimensional requirements remain consistent and measurably the same from one batch of springs to the next.

Longer Spring Life

• Engineered to better withstand shock loading. • Designed to endure constant high-speed deflections. • Shot-peened to increase fatigue life. • Less downtime.

Excellent Deflection

• More travel in each spring. • More travel in each spring. • Higher load capacities. • Increased fatigue life. • Greater application flexibility. • More reliable performance. • Lower solid height.

• Springs provide greater available travel to solid.

2

DEFLECTION TO COMPRESSED LENGTH

CONVERSION TABLES

Inch Die Spring Series

Medium-Duty Compressed Length (in)

Medium-Heavy Duty Compressed Length (in)

Heavy-Duty Compressed Length (in)

Deflection in % free length 15% 17% 20% Extra-Heavy Duty Compressed Length (in)

Free Length ( in)

Deflection in % free length

Deflection in % free length

Deflection in % free length

25%

35% 40%

20%

25% 30%

15%

20% 25%

1

0.75 0.94 1.13 1.31 1.50 1.88 2.25 2.63 3.00 3.38 3.75 4.13 4.50 4.88 5.25 5.63 6.00 7.50 9.00

0.65 0.81 0.98 1.14 1.30 1.63 1.95 2.28 2.60 2.93 3.25 3.58 3.90 4.23 4.55 4.88 5.20 6.50 7.80

0.60 0.75 0.90 1.05 1.20 1.50 1.80 2.10 2.40 2.70 3.00 3.30 3.60 3.90 4.20 4.50 4.80 6.00 7.20

0.80 1.00 1.20 1.40 1.60 2.00 2.40 2.80 3.20 3.60 4.00 4.40 4.80 5.20 5.60 6.00 6.40 8.00 9.60

0.75 0.94 1.13 1.31 1.50 1.88 2.25 2.63 3.00 3.38 3.75 4.13 4.50 4.88 5.25 5.63 6.00 7.50 9.00

0.70 0.88 1.05 1.23 1.40 1.75 2.10 2.45 2.80 3.15 3.50 3.85 4.20 4.55 4.90 5.25 5.60 7.00 8.40

0.85 1.06 1.28 1.49 1.70 2.13 2.55 2.98 3.40 3.83 4.25 4.68 5.10 5.53 5.95 6.38 6.80 8.50

0.80 1.00 1.20 1.40 1.60 2.00 2.40 2.80 3.20 3.60 4.00 4.40 4.80 5.20 5.60 6.00 6.40 8.00 9.60

0.75 0.94 1.13 1.31 1.50 1.88 2.25 2.63 3.00 3.38 3.75 4.13 4.50 4.88 5.25 5.63 6.00 7.50 9.00

0.85 1.06 1.28 1.49 1.70 2.13 2.55 2.98 3.40 3.83 4.25 4.68 5.10 5.53 5.95 6.38 6.80 8.50

0.83 1.04 1.25 1.45 1.66 2.08 2.49 2.91 3.32 3.74 4.15 4.57 4.98 5.40 5.81 6.23 6.64 8.30 9.96

0.80 1.00 1.20 1.40 1.60 2.00 2.40 2.80 3.20 3.60 4.00 4.40 4.80 5.20 5.60 6.00 6.40 8.00 9.60

1 1/4 1 1/2 1 3/4

2

2 1/2

3

3 1/2

4

4 1/2

5

5 1/2

6

6 1/2

7

7 1/2

8

10 12

10.20

10.20

Metric Die Spring Series

Medium-Duty Compressed Length (mm)

Medium-Heavy Duty Compressed Length (mm)

Heavy-Duty Compressed Length (mm)

Deflection in % free length 15% 17% 20% Extra-Heavy Duty Compressed Length (mm)

Free Length ( mm)

Deflection in % free length

Deflection in % free length

Deflection in % free length

25%

35% 40%

20%

25% 30%

15%

20% 25%

25 32 38 44 51 64 76 89 102 114 127 140 152 165 178 191 203 254 305

19 24 29 33 38 48 57 67 76 86 95

17 21 25 29 33 41 50 58 66 84 83 91 99

15 19 23 27 30 38 46 53 61 69 76 84 91 99

20 25 30 36 41 51 61 71 81 91

19 24 29 33 38 48 57 67 76 86 95

18 22 27 31 36 44 53 62 71 80 89 98

22 27 32 38 43 54 65 76 86 97

20 25 30 36 41 51 61 71 81 91

19 24 29 33 38 48 57 67 76 86 95

22 27 32 38 43 54 65 76 86 97

21 26 32 37 42 53 63 74 84 95

20 25 30 36 41 51 61 71 81 91

102 112 122 132 142 152 163 203 244

108 119 130 140 151 162 173 216 259

102 112 122 132 142 152 163 203 244

108 119 130 140 151 162 173 216 259

105 116 126 137 148 158 169 211 253

102 112 122 132 142 152 163 203 244

105 114 124 133 143 152 191 229

105 114 124 133 143 152 191 229

105 114 124 133 143 152 191 229

107 116 124 133 142 178 213

107 116 124 132 165 198

107 114 122 152 183

SUPERIOR DIE SET CORPORATION

• 900 W. Drexel Ave. • Oak Creek, WI 53154-0008 • WATS 1-800-558-6040 • FAX 1-800-657-0855 • Local 764-4900

3

RAYMOND ® MEDIUM-DUTY DIE SPRINGS

C

A

B

MEDIUM-DUTY DIE SPRINGS INCH SERIES

BLUE ®

Raymond ®

Hole Dia. ( in) A

Rod Dia. ( in) B

Free Length ( in) C

Load at 1/10 in. Def. ( lb)

LOAD DEFLECTION TABLE

For Optimum Life (25% of free length) Load (lb)

For Long Life (35% of free length) Load (lb)

Maximum Operating Def. (40% of free length) Load (lb) Deflection (in)

* Maximum Deflection (50% of free length) Load (lb)

CATALOG NUMBER

Deflection (in)

Deflection (in)

Deflection (in)

1

341-0604 341-0605 341-0606 341-0607 341-0608 341-0610 341-0612 341-0648 341-0804 341-0805 341-0806 341-0807 341-0808 341-0810 341-0812 341-0814 341-0818 341-0822 341-0826 341-0830 341-0848 341-1004 341-1005 341-1006 341-1007 341-1008 341-1010 341-1012 341-1014 341-1016 341-1048 341-1204 341-1205 341-1206 341-1207 341-1208 341-1210 341-1212 341-1214 341-1216 341-1218 341-1220 341-1222 341-1224 341-1226 341-1230 341-1248

6.0 5.4 4.0 3.4 2.8 2.4 2.1 0.6 8.2 6.8 6.0 5.5 4.5 3.5 3.0 2.5 2.1 1.4 1.2 0.7 9.6 8.8 6.0 5.6 4.8 4.4 1.6

15.0 16.9 15.0 14.9 14.0 15.0 15.8 18.0 27.5 25.6 25.5 26.3 27.5 28.1 26.3 26.3 28.1 28.9 22.8 22.5 21.0 41.0 40.0 40.5 42.0 44.0 37.5 42.0 42.0 44.0 48.0 78.0 80.0 75.0 77.0 72.0 75.0 72.0 70.0 72.0 72.0 75.0 75.6 75.0 73.1 71.3 72.0

0.25 0.31 0.38 0.44 0.50 0.63 0.75 3.00 0.25 0.31 0.38 0.44 0.50 0.63 0.75 0.88 1.13 1.38 1.63 1.88 3.00 0.25 0.31 0.38 0.44 0.50 0.63 0.75 0.88 1.00 3.00 0.25 0.31 0.38 0.44 0.50 0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.88 3.00

21.0 23.6 21.0 20.8 19.6 21.0 22.0 25.2 38.5 35.9 35.7 36.8 38.5 39.4 36.8 36.8 39.4 40.4 31.9 31.5 29.4 57.4 56.0 56.7 58.8 61.6 52.5 58.8 58.8 61.6 67.2

0.35 0.44 0.53 0.61 0.70 0.88 1.05 4.20 0.35 0.44 0.53 0.61 0.70 0.88 1.05 1.23 1.58 1.93 2.28 2.63 4.20 0.35 0.44 0.53 0.61 0.70 0.88 1.05 1.23 1.40 4.20 0.35 0.44 0.53 0.61 0.70 0.88 1.05 1.23 1.40 1.58 1.75 1.93 2.10 2.28 2.63 4.20

24.0 27.0 24.0 23.8 22.4 24.0 25.2 28.8 44.0 41.0 40.8 42.0 44.0 45.0 42.0 42.0 45.0 46.2 36.4 36.0 33.6 65.6 64.0 64.8 67.2 70.4 60.0 67.2 67.2 70.4 76.8

0.40 0.50 0.60 0.70 0.80 1.00 1.20 4.80 0.40 0.50 0.60 0.70 0.80 1.00 1.20 1.40 1.80 2.20 2.60 3.00 4.80 0.40 0.50 0.60 0.70 0.80 1.00 1.20 1.40 1.60 4.80 0.40 0.50 0.60 0.70 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 3.00 4.80

30.0 33.8 30.0 29.8 28.0 30.0 31.5 36.0 55.0 51.3 51.0 52.5 55.0 56.3 52.5 52.5 56.3 57.8 45.5 45.0 42.0 82.0 80.0 81.0 84.0 88.0 75.0 84.0 84.0 88.0 96.0

0.50 0.63 0.75 0.88 1.00 1.25 1.50 6.00 0.50 0.63 0.75 0.88 1.00 1.25 1.50 1.75 2.25 2.75 3.25 3.75 6.00 0.50 0.63 0.75 0.88 1.00 1.25 1.50 1.75 2.00 6.00 0.50 0.63 0.75 0.88 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.75 6.00

1 1/4 1 1/2 1 3/4

3/8 (9.5 mm)

3/16 (4.7 mm)

2

2 1/2

3

12

1

11.0

1 1/4 1 1/2 1 3/4

2

2 1/2

1/2 (13 mm)

9/32 (7 mm)

3

3 1/2 4 1/2 5 1/2 6 1/2 7 1/2

12

1

16.4 12.8 10.8

1 1/4 1 1/2 1 3/4

5/8 (16 mm)

11/32 (8.7 mm)

2

2 1/2

3

3 1/2

4

12

1

31.2 25.6 20.0 17.6 14.4 12.0

109.2 112.0 105.0 107.8 100.8 105.0 100.8 98.0 100.8 100.8 105.0 105.9 105.0 102.4 99.8 100.8

124.8 128.0 120.0 123.2 115.2 120.0 115.2 112.0 115.2 115.2 120.0 121.0 120.0 117.0 114.0 115.2

156.0 160.0 150.0 154.0 144.0 150.0 144.0 140.0 144.0 144.0 150.0 151.3 150.0 146.3 142.5 144.0

1 1/4 1 1/2 1 3/4

2

2 1/2

3

9.6 8.0 7.2 6.4 6.0 5.5 5.0 4.5 3.8 2.4

3/4 (19.5 mm)

3/8 (9.5 mm)

3 1/2

4

4 1/2

5

5 1/2

6

6 1/2 7 1/2

12

* Tabulated load values shown represent loads near solid and are for design information only. See Current Price List for Quantity Prices. Raymond ® die spring color blue is a registered trademark of Barnes Group Inc.

4

RAYMOND ® MEDIUM-DUTY DIE SPRINGS

Efficient Operating Range 25 to 35% of Free Length

Maximum Deflection 50% of Free Length

Ordering Procedure Please Specify:

• Quantity • Spring Type • Hole Diameter • Free Length • Catalog Number

MEDIUM-DUTY DIE SPRINGS INCH SERIES

BLUE ®

Raymond ®

Hole Dia. ( in) A

Rod Dia. ( in) B

1 1 1/4 1 1/2 1 3/4 Free Length ( in) C

LOAD DEFLECTION TABLE

Load at 1/10 in. Def. ( lb)

For Optimum Life (25% of free length) Load (lb)

For Long Life (35% of free length) Load (lb)

Maximum Operating Def. (40% of free length) Load (lb) Deflection (in)

* Maximum Deflection (50% of free length) Load (lb)

CATALOG NUMBER

Deflection (in)

Deflection (in)

Deflection (in)

341-1604 341-1605 341-1606 341-1607 341-1608 341-1610 341-1612 341-1614 341-1616 341-1618 341-1620 341-1622 341-1624 341-1628 341-1632 341-1648 341-2006 341-2007 341-2008 341-2010 341-2012 341-2014 341-2016 341-2018 341-2020 341-2022 341-2024 341-2028 341-2032 341-2040 341-2048 341-2408 341-2410 341-2412 341-2414 341-2416 341-2418 341-2420 341-2422 341-2424 341-2428 341-2432 341-2440 341-2448 341-3210 341-3212 341-3214 341-3216 341-3218 341-3220 341-3222 341-3224 341-3228 341-3232 341-3240 341-3248

55.0 45.0 35.0 30.0 26.0 20.0 16.5 15.0 12.0 10.4

137.5 140.6 131.3 131.3 130.0 125.0 123.8 131.3 120.0 117.0 120.0 121.0 120.0 126.0 120.0 120.0 186.0 185.5 176.0 180.0 180.0 175.0 176.0 180.0 170.0 176.0 180.0 182.0 176.0 180.0 180.0 265.0 281.3 270.0 262.5 270.0 258.8 262.5 254.4 255.0 253.8 256.0 250.0 240.0 625.0 622.5 567.0 600.0 596.3 587.5 539.0 585.0 546.0 570.0 520.0 525.0

0.25 0.31 0.38 0.44 0.50 0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.75 2.00 3.00 0.38 0.44 0.50 0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.75 2.00 2.50 3.00 0.50 0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.75 2.00 2.50 3.00 0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.75 2.00 2.50 3.00

192.5 196.9 183.8 183.8 182.0 175.0 173.3 183.8 168.0 163.8 168.0 169.4 168.0 176.4 168.0 168.0 260.4 259.7 246.4 252.0 252.0 245.0 246.4 252.0 238.0 246.4 252.0 254.8 246.4 252.0 252.0 371.0 393.8 378.0 367.5 378.0 362.3 367.5 356.1 357.0 355.3 358.4 350.0 336.0 875.0 871.5 793.8 840.0 834.8 822.5 754.6 819.0 764.4 798.0 728.0 735.0

0.35 0.44 0.53 0.61 0.70 0.88 1.05 1.23 1.40 1.58 1.75 1.93 2.10 2.45 2.80 4.20 0.53 0.61 0.70 0.88 1.05 1.23 1.40 1.58 1.75 1.93 2.10 2.45 2.80 3.50 4.20 0.70 0.88 1.05 1.23 1.40 1.58 1.75 1.93 2.10 2.45 2.80 3.50 4.20 0.88 1.05 1.23 1.40 1.58 1.75 1.93 2.10 2.45 2.80 3.50 4.20

220.0 225.0 210.0 210.0 208.0 200.0 198.0 210.0 192.0 187.2 192.0 193.6 192.0 201.6 192.0 192.0 297.6 296.8 281.6 288.0 288.0 280.0 281.6 288.0 272.0 281.6 288.0 291.2 281.6 288.0 288.0 424.0 450.0 432.0 420.0 432.0 414.0 420.0 407.0 408.0 406.0 409.6 400.0 384.0 1000.0 996.0 907.2 960.0 954.0 940.0 862.4 936.0 873.6 912.0 832.0 840.0

0.40 0.50 0.60 0.70 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.80 3.20 4.80 0.60 0.70 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.80 3.20 4.00 4.80 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.80 3.20 4.00 4.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.80 3.20 4.00 4.80

275.0 281.3 262.5 262.5 260.0 250.0 247.5 262.5 240.0 234.0 240.0 242.0 240.0 252.0 240.0 240.0 372.0 371.0 352.0 360.0 360.0 350.0 352.0 360.0 340.0 352.0 360.0 364.0 352.0 360.0 360.0 530.0 562.5 540.0 525.0 540.0 517.5 525.0 508.8 510.0 507.5 512.0 500.0 480.0 1250.0 1245.0 1134.0 1200.0 1192.5 1175.0 1078.0 1170.0 1092.0 1140.0 1040.0 1050.0

0.50 0.63 0.75 0.88 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.50 4.00 6.00 0.75 0.88 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.50 4.00 5.00 6.00 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.50 4.00 5.00 6.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.50 4.00 5.00 6.00

2

2 1/2

1 (25.5 mm)

1/2 (13 mm)

3

3 1/2

4

4 1/2

5

9.6 8.8 8.0 7.2 6.0 4.0

5 1/2

6 7 8

12

1 1/2 1 3/4

49.6 42.4 35.2 28.8 24.0 20.0 17.6 16.0 13.6 12.8 12.0 10.4 53.0 45.0 36.0 30.0 27.0 23.0 21.0 18.5 17.0 14.5 12.8 10.0 8.8 7.2 6.0

2

2 1/2

3

3 1/2

4

1 1/4 (32 mm)

5/8 (16 mm)

4 1/2

5

5 1/2

6 7 8

10 12

2

2 1/2

3

3 1/2

4

4 1/2

1 1/2 (38.5 mm)

3/4 (19.5 mm)

5

5 1/2

6 7 8

10 12

8.0

2 1/2

100.0 83.0 64.8 60.0 53.0 47.0 39.2 39.0 31.2 28.5 20.8 17.5

3

3 1/2

4

4 1/2

2 (51 mm)

1/2 (25.5 mm)

5

5 1/2

6 7 8

10 12

* Tabulated load values shown represent loads near solid and are for design information only. See Current Price List for Quantity Prices.

SUPERIOR DIE SET CORPORATION

• 900 W. Drexel Ave. • Oak Creek, WI 53154-0008 • WATS 1-800-558-6040 • FAX 1-800-657-0855 • Local 764-4900

5

RAYMOND ® MEDIUM-HEAVY DUTY DIE SPRINGS

C

A

B

MEDIUM-HEAVY DUTY DIE SPRINGS INCH SERIES

RED ®

Raymond ®

Hole Dia. ( in) A

Rod Dia. ( in) B

Free Length ( in) C

Load at 1/10 in. Def. ( lb)

LOAD DEFLECTION TABLE

For Optimum Life (20% of free length) Load (lb)

For Long Life (25% of free length) Load (lb)

Maximum Operating Def. (30% of free length) Load (lb) Deflection (in)

* Maximum Deflection (37% of free length) Load (lb)

CATALOG NUMBER

Deflection (in)

Deflection (in)

Deflection (in)

1

342-0604 342-0605 342-0606 342-0607 342-0608 342-0610 342-0612 342-0648 342-0804 342-0805 342-0806 342-0807 342-0808 342-0810 342-0812 342-0814 342-0848 342-1004 342-1005 342-1006 342-1007 342-1008 342-1010 342-1012 342-1014 342-1016 342-1048 342-1204 342-1205 342-1206 342-1207 342-1208 342-1210 342-1212 342-1214 342-1216 342-1218 342-1220 342-1222 342-1224 342-1248

9.0 7.3 6.7 5.8 5.0 4.2 3.0 0.9 9.5 8.5 7.5 6.0 5.7 4.0 1.2 16.8 13.0 30.0 21.5 19.0 16.8 14.8 11.5 10.0 50.0 38.0 32.0 28.8 24.8 19.2 14.4 12.8 12.0 11.2 8.5 7.6 2.7

18.0 18.3 20.1 20.3 20.0 21.0 18.0 21.6 33.6 32.5 28.5 29.8 30.0 30.0 34.2 28.0 28.8 60.0 53.8 57.0 58.8 59.2 57.5 60.0 59.5 60.8 64.8

0.20 0.25 0.30 0.35 0.40 0.50 0.60 2.40 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.70 2.40 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.70 0.80 2.40 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 2.40

22.5 22.8 25.1 25.4 25.0 26.3 22.5 27.0 42.0 40.6 35.6 37.2 37.5 37.5 42.8 35.0 36.0 75.0 67.2 71.3 73.5 74.0 71.9 75.0 74.4 76.0 81.0

0.25 0.31 0.38 0.44 0.50 0.63 0.75 3.00 0.25 0.31 0.38 0.44 0.50 0.63 0.75 0.88 3.00 0.25 0.31 0.38 0.44 0.50 0.63 0.75 0.88 1.00 3.00 0.25 0.31 0.38 0.44 0.50 0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 3.00

27.0 27.4 30.2 30.5 30.0 31.5 27.0 32.4 50.4 48.8 42.8 44.6 45.0 45.0 51.3 42.0 43.2 90.0 80.6 85.5 88.2 88.8 86.3 90.0 89.3 91.2 97.2

0.30 0.38 0.45 0.53 0.60 0.75 0.90 3.60 0.30 0.38 0.45 0.53 0.60 0.75 0.90 1.05 3.60 0.30 0.38 0.45 0.53 0.60 0.75 0.90 1.05 1.20 3.60 0.30 0.38 0.45 0.53 0.60 0.75 0.90 1.05 1.20 1.35 1.50 1.65 1.80 3.60

33.3 33.8 37.2 37.6 37.0 38.9 33.3 40.0 62.2 60.1 52.7 55.0 55.5 55.5 63.3 51.8 53.3

0.37 0.46 0.56 0.65 0.74 0.93 1.11 4.44 0.37 0.46 0.56 0.65 0.74 0.93 1.11 1.30 4.44 0.37 0.46 0.56 0.65 0.74 0.93 1.11 1.30 1.48 4.44 0.37 0.46 0.56 0.65 0.74 0.93 1.11 1.30 1.48 1.67 1.85 2.04 2.22 4.44

1 1/4 1 1/2 1 3/4

3/8 (9.5 mm)

3/16 (4.7 mm)

2

2 1/2

3

12

1

1 1/4 1 1/2 1 3/4

1/2 (13 mm)

9/32 (7 mm)

2

2 1/2

3

3 1/2

12

1

111.0 99.4 105.5 108.8 109.5 106.4 111.0 110.1 112.5 119.9 185.0 175.8 177.6 186.5 183.5 177.6 159.8 165.8 177.6 186.5 166.5 162.8 166.5 159.8

1 1/4 1 1/2 1 3/4

5/8 (16 mm)

11/32 (8.7 mm)

2

2 1/2

3

3 1/2

4

12

1

100.0 95.0 96.0 100.8 99.2 96.0 86.4 89.6 96.0 100.8 90.0 88.0 90.0 86.4

125.0 118.8 120.0 126.0 124.0 120.0 108.0 112.0 120.0 126.0 112.5 110.0 112.5 108.0

150.0 142.5 144.0 151.2 148.8 144.0 129.6 134.4 144.0 151.2 135.0 132.0 135.0 129.6

1 1/4 1 1/2 1 3/4

2

2 1/2

3/4 (19.5 mm)

3/8 (9.5 mm)

3

3 1/2

4

4 1/2

5

9.0 8.0 7.5 3.6

5 1/2

6

12

* Tabulated load values shown represent loads near solid and are for design information only. See Current Price List for Quantity Prices. Raymond ® die spring color red is a registered trademark of Barnes Group Inc.

6

RAYMOND ® MEDIUM-HEAVY DUTY DIE SPRINGS

Efficient Operating Range 20 to 25% of Free Length

Maximum Deflection 37% of Free Length

Ordering Procedure Please Specify:

• Quantity • Spring Type • Hole Diameter • Free Length • Catalog Number

MEDIUM-HEAVY DUTY DIE SPRINGS INCH SERIES

RED ®

Raymond ®

Hole Dia. ( in) A

Rod Dia. ( in) B

Free Length ( in) C 1 1/4 1 1/2 1 3/4 1

LOAD DEFLECTION TABLE

Load at 1/10 in. Def. ( lb)

For Optimum Life (20% of free length) Load (lb)

For Long Life (25% of free length) Load (lb)

Maximum Operating Def. (30% of free length) Load (lb) Deflection (in)

* Maximum Deflection (37% of free length) Load (lb)

CATALOG NUMBER

Deflection (in)

Deflection (in)

Deflection (in)

342-1604 342-1605 342-1606 342-1607 342-1608 342-1610 342-1612 342-1614 342-1616 342-1618 342-1620 342-1622 342-1624 342-1628 342-1632 342-1648 342-2006 342-2007 342-2008 342-2010 342-2012 342-2014 342-2016 342-2018 342-2020 342-2022 342-2024 342-2028 342-2032 342-2040 342-2048 342-2408 342-2410 342-2412 342-2414 342-2416 342-2418 342-2420 342-2422 342-2424 342-2428 342-2432 342-2440 342-2448 342-3210 342-3212 342-3214 342-3216 342-3218 342-3220 342-3222 342-3224 342-3228 342-3232 342-3240 342-3248

76.0 62.4 49.6 44.0 40.0 31.0 25.0 21.6 18.4 17.0 14.4 12.8 12.0 10.0

152.0 156.0 148.8 154.0 160.0 155.0 150.0 151.2 147.2 153.0 144.0 140.8 144.0 140.0 140.8 148.8 343.2 352.8 345.6 312.0 307.2 308.0 294.4 288.0 290.0 290.4 300.0 280.0 294.4 290.0 297.6 432.0 428.0 374.4 369.6 384.0 388.8 368.0 378.4 364.8 369.6 352.0 352.0 345.6 592.0 576.0 560.0 531.2 540.0 560.0 554.4 566.4 560.0 563.2 520.0 537.6

0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.40 1.60 2.40 0.30 0.35 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.40 1.60 2.00 2.40 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.40 1.60 2.00 2.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.40 1.60 2.00 2.40

190.0 195.0 186.0 192.5 200.0 193.8 187.5 189.0 184.0 191.3 180.0 176.0 180.0 175.0 176.0 186.0 429.0 441.0 432.0 390.0 384.0 385.0 368.0 360.0 362.5 363.0 375.0 350.0 368.0 362.5 372.0 540.0 535.0 468.0 462.0 480.0 486.0 460.0 473.0 456.0 462.0 440.0 440.0 432.0 740.0 720.0 700.0 664.0 675.0 700.0 693.0 708.0 700.0 704.0 650.0 672.0

0.25 0.31 0.38 0.44 0.50 0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.75 2.00 3.00 0.38 0.44 0.50 0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.75 2.00 2.50 3.00 0.50 0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.75 2.00 2.50 3.00 0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.75 2.00 2.50 3.00

228.0 234.0 223.2 231.0 240.0 232.5 225.0 226.8 220.8 229.5 216.0 211.2 216.0 210.0 211.2 223.2 514.8 529.2 518.4 468.0 460.8 462.0 441.6 432.0 435.0 435.6 450.0 420.0 441.6 435.0 446.4 648.0 642.0 561.6 554.4 576.0 583.2 552.0 567.6 547.2 554.4 528.0 528.0 518.4 888.0 864.0 840.0 796.8 810.0 840.0 831.6 849.6 840.0 844.8 780.0 806.4

0.30 0.38 0.45 0.53 0.60 0.75 0.90 1.05 1.20 1.35 1.50 1.65 1.80 2.10 2.40 3.60 0.45 0.53 0.60 0.75 0.90 1.05 1.20 1.35 1.50 1.65 1.80 2.10 2.40 3.00 3.60 0.60 0.75 0.90 1.05 1.20 1.35 1.50 1.65 1.80 2.10 2.40 3.00 3.60 0.75 0.90 1.05 1.20 1.35 1.50 1.65 1.80 2.10 2.40 3.00 3.60

281.2 288.6 275.3 284.9 296.0 286.8 277.5 279.7 272.3 283.1 266.4 260.5 266.4 259.0 260.5 275.3 634.9 652.7 639.4 577.2 568.3 569.8 544.6 532.8 536.5 537.2 555.0 518.0 544.6 536.5 550.6 799.2 791.8 692.6 683.8 710.4 719.3 680.8 700.0 674.9 683.8 651.2 651.2 639.4 1095.2 1065.6 1036.0 982.7 999.0 1036.0 1025.6 1047.8 1036.0 1041.9 962.0 994.6

0.37 0.46 0.56 0.65 0.74 0.93 1.11 1.30 1.48 1.67 1.85 2.04 2.22 2.59 2.96 4.44 0.56 0.65 0.74 0.93 1.11 1.30 1.48 1.67 1.85 2.04 2.22 2.59 2.96 3.70 4.44 0.74 0.93 1.11 1.30 1.48 1.67 1.85 2.04 2.22 2.59 2.96 3.70 4.44 0.93 1.11 1.30 1.48 1.67 1.85 2.04 2.22 2.59 2.96 3.70 4.44

2

2 1/2

3

1 (25.5 mm)

1/2 (13 mm)

3 1/2

4

4 1/2

5

5 1/2

6 7 8

8.8 6.2

12

1 1/2 1 3/4

114.4 100.8 86.4 62.4 51.2 44.0 36.8 32.0 29.0 26.4 25.0 20.0 18.4 14.5 12.4 108.0 85.6 62.4 52.8 48.0 43.2 36.8 34.4 30.4 26.4 22.0 17.6 14.4 118.4 96.0 80.0 66.4 60.0 56.0 50.4 47.2 40.0 35.2 26.0 22.4

2

2 1/2

3

3 1/2

1 1/4 (32 mm)

5/8 (16 mm)

4

4 1/2

5

5 1/2

6 7 8

10 12

2

2 1/2

3

3 1/2

4

1 1/2 (38.5 mm)

3/4 (19.5 mm)

4 1/2

5

5 1/2

6 7 8

10 12

2 1/2

3

3 1/2

4

4 1/2

2 (51 mm)

1 (25.5 mm)

5

5 1/2

6 7 8

10 12

* Tabulated load values shown represent loads near solid and are for design information only. See Current Price List for Quantity Prices. SUPERIOR DIE SET CORPORATION • 900 W. Drexel Ave. • Oak Creek, WI 53154-0008

• WATS 1-800-558-6040 • FAX 1-800-657-0855 • Local 764-4900

7

RAYMOND ® HEAVY-DUTY DIE SPRINGS

C

A

B

HEAVY-DUTY DIE SPRINGS INCH SERIES

GOLD ®

Raymond ®

Hole Dia. ( in) A

Rod Dia. ( in) B

Free Length ( in) C

Load at 1/10 in. Def. ( lb)

LOAD DEFLECTION TABLE

For Optimum Life (15% of free length) Load (lb)

For Long Life (20% of free length) Load (lb)

Maximum Operating Def. (25% of free length) Load (lb) Deflection (in)

* Maximum Deflection (30% of free length) Load (lb)

CATALOG NUMBER

Deflection (in)

Deflection (in)

Deflection (in)

1

343-0604 343-0605 343-0606 343-0607 343-0608 343-0610 343-0612 343-0648 343-0804 343-0805 343-0806 343-0807 343-0808 343-0810 343-0812 343-0814 343-0848 343-1004 343-1005 343-1006 343-1007 343-1008 343-1010 343-1012 343-1014 343-1016 343-1048 343-1204 343-1205 343-1206 343-1207 343-1208 343-1210 343-1212 343-1214 343-1216 343-1218 343-1220 343-1222 343-1224 343-1248

11.0

16.5 18.4 18.0 22.1 21.6 20.6 18.9 21.6 35.4 34.9 34.9 36.2 33.0 31.5 33.3 31.5 28.8 63.6 55.5 61.2 63.0 62.4 63.8 64.8 64.1 64.8 54.0

0.15 0.19 0.23 0.26 0.30 0.38 0.45 1.80 0.15 0.19 0.23 0.26 0.30 0.38 0.45 0.53 1.80 0.15 0.19 0.23 0.26 0.30 0.38 0.45 0.53 0.60 1.80 0.15 0.19 0.23 0.26 0.30 0.38 0.45 0.53 0.60 0.68 0.75 0.83 0.90 1.80

22.0 24.5 24.0 29.4 28.8 27.5 25.2 28.8 47.2 46.5 46.5 48.3 44.0 42.0 44.4 42.0 38.4 84.8 74.0 81.6 84.0 83.2 85.0 86.4 85.4 86.4 72.0

0.20 0.25 0.30 0.35 0.40 0.50 0.60 2.40 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.70 2.40 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.70 0.80 2.40 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 2.40

27.5 30.6 30.0 36.8 36.0 34.4 31.5 36.0 59.0 58.1 58.1 60.4 55.0 52.5 55.5 52.5 48.0

0.25 0.31 0.38 0.44 0.50 0.63 0.75 3.00 0.25 0.31 0.38 0.44 0.50 0.63 0.75 0.88 3.00 0.25 0.31 0.38 0.44 0.50 0.63 0.75 0.88 1.00 3.00 0.25 0.31 0.38 0.44 0.50 0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 3.00

33.0 36.8 36.0 44.1 43.2 41.3 37.8 43.2 70.8 69.8 69.8 72.5 66.0 63.0 66.6 63.0 57.6

0.30 0.38 0.45 0.53 0.60 0.75 0.90 3.60 0.30 0.38 0.45 0.53 0.60 0.75 0.90 1.05 3.60 0.30 0.38 0.45 0.53 0.60 0.75 0.90 1.05 1.20 3.60 0.30 0.38 0.45 0.53 0.60 0.75 0.90 1.05 1.20 1.35 1.50 1.65 1.80 3.60

1 1/4 1 1/2 1 3/4

9.8 8.0 8.4 7.2 5.5 4.2 1.2

3/8 (9.5 mm)

3/16 (4.7 mm)

2

2 1/2

3

12

1

23.6 18.6 15.5 13.8 11.0

1 1/4 1 1/2 1 3/4

1/2 (13 mm)

9/32 (7 mm)

2

2 1/2

8.4 7.4 6.0 1.6

3

3 1/2

12

1

42.4 29.6 27.2 24.0 20.8 17.0 14.4 12.2 10.8

106.0 92.5 102.0 105.0 104.0 106.3 108.0 106.8 108.0 90.0 270.0 275.0 246.0 262.5 248.0 250.0 255.0 245.0 250.0 247.5 243.8 233.8 240.0 240.0

127.2 111.0 122.4 126.0 124.8 127.5 129.6 128.1 129.6 108.0 324.0 330.0 295.2 315.0 297.6 300.0 306.0 294.0 300.0 297.0 292.5 280.5 288.0 288.0

1 1/4 1 1/2 1 3/4

5/8 (16 mm)

11/32 (8.7 mm)

2

2 1/2

3

3 1/2

4

12

3.0

1

108.0 88.0 65.6 60.0 49.6 40.0 34.0 28.0 25.0 22.0 19.5 17.0 16.0

162.0 165.0 147.6 157.5 148.8 150.0 153.0 147.0 150.0 148.5 146.3 140.3 144.0 144.0

216.0 220.0 196.8 210.0 198.4 200.0 204.0 196.0 200.0 198.0 195.0 187.0 192.0 192.0

1 1/4 1 1/2 1 3/4

2

2 1/2

3/4 (19.5 mm)

3/8 (9.5 mm)

3

3 1/2

4

4 1/2

5

5 1/2

6

12

8.0

* Tabulated load values shown represent loads near solid and are for design information only. See Current Price List for Quantity Prices. Raymond ® die spring color gold is a registered trademark of Barnes Group Inc.

8

RAYMOND ® HEAVY-DUTY DIE SPRINGS

Efficient Operating Range 15 to 20% of Free Length

Maximum Deflection 30% of Free Length

Ordering Procedure Please Specify:

• Quantity • Spring Type • Hole Diameter • Free Length • Catalog Number

HEAVY-DUTY DIE SPRINGS INCH SERIES

GOLD ®

Raymond ®

Hole Dia. ( in) A

Rod Dia. ( in) B

Free Length ( in) C

LOAD DEFLECTION TABLE

Load at 1/10 in. Def. ( lb) 208.0 171.2 118.4 104.0

For Optimum Life (15% of free length) Load (lb)

For Long Life (20% of free length) Load (lb)

Maximum Operating Def. (25% of free length) Load (lb) Deflection (in)

* Maximum Deflection (30% of free length) Load (lb)

CATALOG NUMBER

Deflection (in)

Deflection (in)

Deflection (in)

1

343-1604 343-1605 343-1606 343-1607 343-1608 343-1610 343-1612 343-1614 343-1616 343-1618 343-1620 343-1622 343-1624 343-1628 343-1632 343-1648 343-2006 343-2007 343-2008 343-2010 343-2012 343-2014 343-2016 343-2018 343-2020 343-2022 343-2024 343-2028 343-2032 343-2040 343-2048 343-2408 343-2410 343-2412 343-2414 343-2416 343-2418 343-2420 343-2422 343-2424 343-2428 343-2432 343-2440 343-2448 343-3210 343-3212 343-3214 343-3216 343-3218 343-3220 343-3222 343-3224 343-3228 343-3232 343-3240 343-3248

312.0 321.0 266.4 273.0 270.0 255.0 244.8 239.4 240.0 237.6 234.0 237.6 230.4 235.2 230.4 216.0 477.0 476.7 448.8 441.0 428.4 394.8 398.4 394.2 397.5 389.4 381.6 386.4 393.6 384.0 374.4 571.2 581.3 585.0 558.6 547.2 529.2 534.0 528.0 525.6 520.8 518.4 516.0 518.4 975.0 900.0 892.5 900.0 810.0 825.0 825.0 846.0 861.0 876.0 825.0 756.0

0.15 0.19 0.23 0.26 0.30 0.38 0.45 0.53 0.60 0.68 0.75 0.83 0.90 1.05 1.20 1.80 0.23 0.26 0.30 0.38 0.45 0.53 0.60 0.68 0.75 0.83 0.90 1.05 1.20 1.50 1.80 0.30 0.38 0.45 0.53 0.60 0.68 0.75 0.83 0.90 1.05 1.20 1.50 1.80 0.38 0.45 0.53 0.60 0.68 0.75 0.83 0.90 1.05 1.20 1.50 1.80

416.0 428.0 355.2 364.0 360.0 340.0 326.4 319.2 320.0 316.8 312.0 316.8 307.2 313.6 307.2 288.0 636.0 635.6 598.4 588.0 571.2 526.4 531.2 525.6 530.0 519.2 508.8 515.2 524.8 512.0 499.2 761.6 775.0 780.0 744.8 729.6 705.6 712.0 704.0 700.8 694.4 691.2 688.0 691.2 1300.0 1200.0 1190.0 1200.0 1080.0 1100.0 1100.0 1128.0 1148.0 1168.0 1100.0 1008.0

0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.40 1.60 2.40 0.30 0.35 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.40 1.60 2.00 2.40 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.40 1.60 2.00 2.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.40 1.60 2.00 2.40

520.0 535.0 444.0 455.0 450.0 425.0 408.0 399.0 400.0 396.0 390.0 396.0 384.0 392.0 384.0 360.0 795.0 794.5 748.0 735.0 714.0 658.0 664.0 657.0 662.5 649.0 636.0 644.0 656.0 640.0 624.0 952.0 968.8 975.0 931.0 912.0 882.0 890.0 880.0 876.0 868.0 864.0 860.0 864.0 1625.0 1500.0 1487.5 1500.0 1350.0 1375.0 1375.0 1410.0 1435.0 1460.0 1375.0 1260.0

0.25 0.31 0.38 0.44 0.50 0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.75 2.00 3.00 0.38 0.44 0.50 0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.75 2.00 2.50 3.00 0.50 0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.75 2.00 2.50 3.00 0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.75 2.00 2.50 3.00

624.0 642.0 532.8 546.0 540.0 510.0 489.6 478.8 480.0 475.2 468.0 475.2 460.8 470.4 460.8 432.0 954.0 953.4 897.6 882.0 856.8 789.6 796.8 788.4 795.0 778.8 763.2 772.8 787.2 768.0 748.8 1142.4 1162.5 1170.0 1117.2 1094.4 1058.4 1068.0 1056.0 1051.2 1041.6 1036.8 1032.0 1036.8 1950.0 1800.0 1785.0 1800.0 1620.0 1650.0 1650.0 1692.0 1722.0 1752.0 1650.0 1512.0

0.30 0.38 0.45 0.53 0.60 0.75 0.90 1.05 1.20 1.35 1.50 1.65 1.80 2.10 2.40 3.60 0.45 0.53 0.60 0.75 0.90 1.05 1.20 1.35 1.50 1.65 1.80 2.10 2.40 3.00 3.60 0.60 0.75 0.90 1.05 1.20 1.35 1.50 1.65 1.80 2.10 2.40 3.00 3.60 0.75 0.90 1.05 1.20 1.35 1.50 1.65 1.80 2.10 2.40 3.00 3.60

1 1/4 1 1/2 1 3/4

2

90.0 68.0 54.4 45.6 40.0 35.2 31.2 28.8 25.6 22.4 19.2 12.0

2 1/2

3

1 (25.5 mm)

1/2 (13 mm)

3 1/2

4

4 1/2

5

5 1/2

6 7 8

12

1 1/2 1 3/4

212.0 181.6 149.6 117.6 95.2 75.2 66.4 58.4 53.0 47.2 42.4 36.8 32.8 25.6 20.8 190.4 155.0 130.0 106.4 91.2 78.4 71.2 64.0 58.4 49.6 43.2 34.4 28.8 260.0 200.0 170.0 150.0 120.0 110.0 100.0 94.0 82.0 73.0 55.0 42.0

2

2 1/2

3

3 1/2

4

1 1/4 (32 mm)

5/8 (16 mm)

4 1/2

5

5 1/2

6 7 8

10 12

2

2 1/2

3

3 1/2

4

1 1/2 (38.5 mm)

3/4 (19.5 mm)

4 1/2

5

5 1/2

6 7 8

10 12

2 1/2

3

3 1/2

4

4 1/2

2 (51 mm)

1 (25.5 mm)

5

5 1/2

6 7 8

10 12

* Tabulated load values shown represent loads near solid and are for design information only. See Current Price List for Quantity Prices.

SUPERIOR DIE SET CORPORATION

• 900 W. Drexel Ave. • Oak Creek, WI 53154-0008 • WATS 1-800-558-6040 • FAX 1-800-657-0855 • Local 764-4900

9

RAYMOND ® EXTRA-HEAVY DUTY DIE SPRINGS

C

A

B

EXTRA-HEAVY DUTY DIE SPRINGS INCH SERIES

GREEN ®

Raymond ®

Hole Dia. ( in) A

Rod Dia. ( in) B

Free Length ( in) C

Load at 1/10 in. Def. ( lb)

LOAD DEFLECTION TABLE

For Optimum Life (15% of free length) Load (lb)

For Long Life (17% of free length) Load (lb)

Maximum Operating Def. (20% of free length) Load (lb) Deflection (in)

* Maximum Deflection (25% of free length) Load (lb)

CATALOG NUMBER

Deflection (in)

Deflection (in)

Deflection (in)

1

344-0604 344-0605 344-0606 344-0607 344-0608 344-0610 344-0612 344-0648 344-0804 344-0805 344-0806 344-0807 344-0808 344-0810 344-0812 344-0814 344-0848 344-1004 344-1005 344-1006 344-1007 344-1008 344-1010 344-1012 344-1014 344-1016 344-1048 344-1204 344-1205 344-1206 344-1207 344-1208 344-1210 344-1212 344-1214 344-1216 344-1218 344-1220 344-1222 344-1224 344-1248

22.0 16.0 12.5 11.5

33.0 30.0 28.1 30.2 27.0 26.3 29.3 27.0 48.0 45.0 45.0 44.6 42.0 43.1 40.5 42.0 45.0 94.5 88.1 85.5 84.0 87.0 82.5 85.5 84.0 81.0 81.0

0.15 0.19 0.23 0.26 0.30 0.38 0.45 1.80 0.15 0.19 0.23 0.26 0.30 0.38 0.45 0.53 1.80 0.15 0.19 0.23 0.26 0.30 0.38 0.45 0.53 0.60 1.80 0.15 0.19 0.23 0.26 0.30 0.38 0.45 0.53 0.60 0.68 0.75 0.83 0.90 1.80

37.4 34.0 31.9 34.2 30.6 29.8 33.2 30.6 54.4 51.0 51.0 50.6 47.6 48.9 45.9 47.6 51.0

0.17 0.21 0.26 0.30 0.34 0.43 0.51 2.04 0.17 0.21 0.26 0.30 0.34 0.43 0.51 0.60 2.04 0.17 0.21 0.26 0.30 0.34 0.43 0.51 0.60 0.68 2.04 0.17 0.21 0.26 0.30 0.34 0.43 0.51 0.60 0.68 0.77 0.85 0.94 1.02 2.04

44.0 40.0 37.5 40.3 36.0 35.0 39.0 36.0 64.0 60.0 60.0 59.5 56.0 57.5 54.0 56.0 60.0

0.20 0.25 0.30 0.35 0.40 0.50 0.60 2.40 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.70 2.40 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.70 0.80 2.40 0.20 0.25 0.30 0.35 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 2.40

55.0 50.0 46.9 50.3 45.0 43.8 48.8 45.0 80.0 75.0 75.0 74.4 70.0 71.9 67.5 70.0 75.0

0.25 0.31 0.38 0.44 0.50 0.63 0.75 3.00 0.25 0.31 0.38 0.44 0.50 0.63 0.75 0.88 3.00 0.25 0.31 0.38 0.44 0.50 0.63 0.75 0.88 1.00 3.00 0.25 0.31 0.38 0.44 0.50 0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 3.00

1 1/4 1 1/2 1 3/4

3/8 (9.5 mm)

3/16 (4.7 mm)

2

9.0 7.0 6.5 1.5

2 1/2

3

12

1

32.0 24.0 20.0 17.0 14.0 11.5 63.0 47.0 38.0 32.0 29.0 22.0 19.0 16.0 13.5 9.0 8.0 2.5

1 1/4 1 1/2 1 3/4

1/2 (13 mm)

9/32 (7 mm)

2

2 1/2

3

3 1/2

12

1

107.1 99.9 96.9 95.2 98.6 93.5 96.9 95.2 91.8 91.8 238.0 233.8 227.0 223.1 231.2 212.5 206.6 205.3 204.0 202.7 199.8 201.0 198.9 193.8

126.0 117.5 114.0 112.0 116.0 110.0 114.0 112.0 108.0 108.0 280.0 275.0 267.0 262.5 272.0 250.0 243.0 241.5 240.0 238.5 235.0 236.5 234.0 228.0

157.5 146.9 142.5 140.0 145.0 137.5 142.5 140.0 135.0 135.0 350.0 343.8 333.8 328.1 340.0 312.5 303.8 301.9 300.0 298.1 293.8 295.6 292.5 285.0

1 1/4 1 1/2 1 3/4

5/8 (16 mm)

11/32 (8.7 mm)

2

2 1/2

3

3 1/2

4

12

4.5

1

140.0 110.0 89.0 75.0 68.0 50.0 40.5 34.5 30.0 26.5 23.5 21.5 19.5

210.0 206.3 200.3 196.9 204.0 187.5 182.3 181.1 180.0 178.9 176.3 177.4 175.5 171.0

1 1/4 1 1/2 1 3/4

2

2 1/2

3/4 (19.5 mm)

3/8 (9.5 mm)

3

3 1/2

4

4 1/2

5

5 1/2

6

12

9.5

* Tabulated load values shown represent loads near solid and are for design information only. See Current Price List for Quantity Prices. Raymond ® die spring color green is a registered trademark of Barnes Group Inc.

10

RAYMOND ® EXTRA-HEAVY DUTY DIE SPRINGS

Efficient Operating Range 15 to 20% of Free Length

Maximum Deflection 25% of Free Length

Ordering Procedure Please Specify:

• Quantity • Spring Type • Hole Diameter • Free Length • Catalog Number

EXTRA-HEAVY DUTY DIE SPRINGS INCH SERIES

GREEN ®

Raymond ®

Hole Dia. ( in) A

Rod Dia. ( in) B

Free Length ( in) C

LOAD DEFLECTION TABLE

Load at 1/10 in. Def. ( lb) 160.0 116.0

For Optimum Life (15% of free length) Load (lb)

For Long Life (17% of free length) Load (lb)

Maximum Operating Def. (20% of free length) Load (lb) Deflection (in)

* Maximum Deflection (25% of free length) Load (lb)

CATALOG NUMBER

Deflection (in)

Deflection (in)

Deflection (in)

1 1/2

344-1606 344-1608 344-1610 344-1612 344-1614 344-1616 344-1618 344-1620 344-1624 344-1648 344-2008 344-2010 344-2012 344-2014 344-2016 344-2018 344-2020 344-2024 344-2032 344-2040 344-2048 344-2408 344-2410 344-2412 344-2414 344-2416 344-2418 344-2420 344-2424 344-2432 344-2440 344-2448 344-3210 344-3212 344-3214 344-3216 344-3218 344-3220 344-3224 344-3232 344-3240 344-3248

360.0 348.0 336.0 331.2 327.6 331.2 329.4 324.0 324.0 316.8 576.0 540.0 532.8 529.2 504.0 529.2 510.0 504.0 499.2 504.0 475.2 1128.0 1104.0 1040.4 1029.0 1027.2 999.0 1020.0 993.6 969.6 1008.0 979.2 1431.0 1404.0 1335.6 1320.0 1274.4 1296.0 1274.4 1200.0 1260.0 1281.6

0.23 0.30 0.38 0.45 0.53 0.60 0.68 0.75 0.90 1.80 0.30 0.38 0.45 0.53 0.60 0.68 0.75 0.90 1.20 1.50 1.80 0.30 0.38 0.45 0.53 0.60 0.68 0.75 0.90 1.20 1.50 1.80 0.38 0.45 0.53 0.60 0.68 0.75 0.90 1.20 1.50 1.80

408.0 394.4 380.8 375.4 371.3 375.4 373.3 367.2 367.2 359.0 652.8 612.0 603.8 599.8 571.2 599.8 578.0 571.2 565.8 571.2 538.6 1278.4 1251.2 1179.1 1166.2 1164.2 1132.2 1156.0 1126.1 1098.9 1142.4 1109.8 1621.8 1591.2 1513.7 1496.0 1444.3 1468.8 1444.3 1360.0 1428.0 1452.5

0.26 0.34 0.43 0.51 0.60 0.68 0.77 0.85 1.02 2.04 0.34 0.43 0.51 0.60 0.68 0.77 0.85 1.02 1.36 1.70 2.04 0.34 0.43 0.51 0.60 0.68 0.77 0.85 1.02 1.36 1.70 2.04 0.43 0.51 0.60 0.68 0.77 0.85 1.02 1.36 1.70 2.04

480.0 464.0 448.0 441.6 436.8 441.6 439.2 432.0 432.0 422.4 768.0 720.0 710.4 705.6 672.0 705.6 680.0 672.0 665.6 672.0 633.6 1504.0 1472.0 1387.2 1372.0 1369.6 1332.0 1360.0 1324.8 1292.8 1344.0 1305.6 1908.0 1872.0 1780.8 1760.0 1699.2 1728.0 1699.2 1600.0 1680.0 1708.8

0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.20 2.40 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.20 1.60 2.00 2.40 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.20 1.60 2.00 2.40 0.50 0.60 0.70 0.80 0.90 1.00 1.20 1.60 2.00 2.40

600.0 580.0 560.0 552.0 546.0 552.0 549.0 540.0 540.0 528.0 960.0 900.0 888.0 882.0 840.0 882.0 850.0 840.0 832.0 840.0 792.0 1880.0 1840.0 1734.0 1715.0 1712.0 1665.0 1700.0 1656.0 1616.0 1680.0 1632.0 2385.0 2340.0 2226.0 2200.0 2124.0 2160.0 2124.0 2000.0 2100.0 2136.0

0.38 0.50 0.63 0.75 0.88 1.00 1.13 1.25 1.50 3.00 0.50 0.63 0.75 0.88 1.00 1.13 1.25 1.50 2.00 2.50 3.00 0.50 0.63 0.75 0.88 1.00 1.13 1.25 1.50 2.00 2.50 3.00 0.63 0.75 0.88 1.00 1.13 1.25 1.50 2.00 2.50 3.00

2

2 1/2

89.6 73.6 62.4 55.2 48.8 43.2 36.0 17.6

3

1 (25.5 mm)

1/2 (13 mm)

3 1/2

4

4 1/2

5 6

12

2

192.0 144.0 118.4 100.8 84.0 78.4 68.0 56.0 41.6 33.6 26.4 376.0 294.4 231.2 196.0 171.2 148.0 136.0 110.4 80.8 67.2 54.4 381.6 312.0 254.4 220.0 188.8 172.8 141.6 100.0 84.0 71.2

2 1/2

3

3 1/2

1 1/4 (32 mm)

5/8 (16 mm)

4

4 1/2

5 6 8

10 12

2

2 1/2

3

3 1/2

4

1 1/2 (38.5 mm)

3/4 (19.5 mm)

4 1/2

5 6 8

10 12

2 1/2

3

3 1/2

4

2 (51 mm)

1 (25.5 mm)

4 1/2

5 6 8

10 12

* Tabulated load values shown represent loads near solid and are for design information only. See Current Price List for Quantity Prices.

SUPERIOR DIE SET CORPORATION

• 900 W. Drexel Ave. • Oak Creek, WI 53154-0008 • WATS 1-800-558-6040 • FAX 1-800-657-0855 • Local 764-4900

11

RAYMOND ® DIE SPRINGS

Ordering Procedure Specify • Quantity

• Heavy duty square wire design • Hole sizes 3/8" diameter to 2 9/16" diameter • Packed in boxes containing 12 each

• Spring Type • Hole Diameter • Free Length • Catalog Number

Square Wire Die Springs

Plain End Springs - 12" Length

New Part Number

Old Part Number

Hole Size ( in)

Rod Size ( in)

Square Wire Size ( in)

Space Between Coils ( in)

Unit Pack

345-1001 345-1002 345-1003 345-1004 345-1005 345-1006 345-1007 345-1008 345-1009 345-1010 345-1011 345-1012 345-1013 345-1014 345-1015 345-1016 345-1017 345-1018 345-1019 345-1020 345-1021 345-1022 345-1023 345-1024 345-1025 345-1026 345-1027 345-1028 345-1029 345-1030 345-1031 345-1032 345-1033 345-1034 345-1035 345-1036 345-1037 345-1038

SR-0

3/8

3/16

0.063 0.063 0.094 0.094 0.094 0.094 0.125 0.125 0.125 0.125 0.125 0.125 0.156 0.156 0.156 0.156 0.156 0.156 0.188 0.188 0.188 0.188 0.188 0.188 0.188 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.312 0.312 0.312 0.312 0.312

0.047 0.079 0.079 0.094 0.125 0.125 0.063 0.094 0.109 0.125 0.188 0.250 0.063 0.109 0.109 0.172 0.188 0.250 0.094 0.094 0.156 0.188 0.188 0.312 0.312 0.109 0.125 0.156 0.172 0.203 0.344 0.438 0.531 0.188 0.250 0.297 0.406 0.438

12 12 12 12 12 12 12 12 12 12

SR-1A SR-1B

7/16

1/4 1/4

1/2

SR-1 SR-2 SR-3 SR-4 SR-5 SR-6 SR-7 SR-8 SR-9

9/16

5/16 7/16 9/16

11/16 13/16

9/16

1/4 3/8 1/2 5/8 3/4 7/8

11/16 13/16 15/16 1 1/16 1 3/16 11/16 13/16 15/16 1 1/16 1 3/16 1 5/16 13/16 15/16 1 1/16 1 3/16 1 5/16 1 7/16 1 9/16 1 1/16 1 3/16 1 5/16 1 7/16 1 9/16 1 13/16 2 1/16 2 5/16 1 9/16 1 13/16 2 1/16 2 5/16 2 9/16

6 6

SR-10 SR-11 SR-12 SR-13 SR-14 SR-15 SR-16 SR-17 SR-18 SR-19 SR-20 SR-21 SR-22 SR-23 SR-24 SR-25 SR-26 SR-27 SR-28 SR-29 SR-30 SR-31 SR-32 SR-33 SR-34 SR-35

5/16 7/16 9/16

12 12 12

11/16 13/16 15/16

6 6 6

3/8 1/2 5/8 3/4 7/8

12 12

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

1

1 1/8 7/16 9/16 11/16 13/16 15/16 1 3/16 1 7/16 1 11/16 13/16 1 1/16 1 5/16 1 9/16 1 13/16

12

RAYMOND ® DIE SPRINGS

Ordering Procedure Specify • Quantity

• High quality plain edge springs furnished in 10" lengths • Hole sizes from 3/32" diameter to 1/2" diameter • Packed in boxes containing 12 each

• Spring Type • Hole Diameter • Free Length • Catalog Number

Round Wire / Music Wire

Plain Ends - 10" Length

Part Number

Hole Size ( in)

Wire Diameter ( in)

Spring Rate ( lb/in)

Approx. Solid Height ( in)

Unit Pack

345-2001 345-2002 345-2003 345-2004 345-2005 345-2006 345-2007 345-2008 345-2009 345-2010 345-2011 345-2012 345-2013 345-2014 345-2015 345-2016 345-2017 345-2018 345-2019 345-2020 345-2021 345-2022 345-2023 345-2024 345-2025 345-2026 345-2027 345-2028 345-2029 345-2030 345-2031 345-2032 345-2033 345-2034 345-2035 345-2036 345-2037 345-2038 345-2039 345-2040 345-2041

3/32 3/32

0.010 0.014 0.012 0.016 0.014 0.018 0.026 0.035 0.018 0.022 0.026 0.031 0.035 0.041 0.047 0.022 0.031 0.037 0.041 0.047 0.055 0.031 0.035 0.043 0.047 0.055 0.062 0.075 0.035 0.047 0.055 0.062 0.075 0.085 0.035 0.047 0.055 0.062 0.075 0.091 0.115

0.11 0.48 0.09 0.35 0.09 0.24 1.34 3.30 0.14 0.26 0.67 1.37 1.73 5.40 9.17 0.15 0.57 1.27 2.70 5.45 0.32 0.58 2.06 2.52 7.29

2.80 3.99 3.00 4.00 2.17 2.52 3.43 6.65 1.71 2.53 2.55 3.10 4.73 3.69 4.70 2.24 3.41 4.07 3.28 3.53 4.40 3.41 3.50 3.01 4.00 3.30 4.03 5.25 2.45 3.29 3.30 4.03 4.13 5.10 3.15 3.53 3.85 2.48 3.38 4.55 6.33

12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

1/8 1/8

3/16 3/16 3/16 3/16

1/4 1/4 1/4 1/4 1/4 1/4 1/4

5/16 5/16 5/16 5/16 5/16 5/16

10.27

3/8 3/8 3/8 3/8 3/8 3/8 3/8

11.29 30.57

7/16 7/16 7/16 7/16 7/16 7/16

0.54 1.81 4.12 6.45

18.18 30.19

1/2 1/2 1/2 1/2 1/2 1/2 1/2

0.26 1.06 2.25 6.77

14.35 30.81 87.36

SUPERIOR DIE SET CORPORATION

• 900 W. Drexel Ave. • Oak Creek, WI 53154-0008 • WATS 1-800-558-6040 • FAX 1-800-657-0855 • Local 764-4900

13

Made with