APC Tools & Equipment Q2 -2019

FRONT-END & SUSPENSION

TIE ROD SERVICE TOOLS

MUK-608950

$45. 95 Pitman Arm Puller OTC-7314A

$82. 95 Outer Tie Rod Remover OTC-7503

1/2" Drive Excentric Turn Chuck •Special tool for turning and fixing the tie rod or ball joints •Unilateral opening allows universalusage for easy ball joint replacementor wheel alignment

SLY-11880

$119. 95

Large Pitman Arm Remover • For removing large Pitman arms on 3/4 to 1 ton pickup trucks • Applications: Ford F250/350, Dodge 2500/3500, Chevrolet/GMC 2500/3500

$434. 95

SLY-14900

Sheppard Pitman Arm Remover • Forged Alloy Steel To Remove The Pitman Arm From Sheppard Steering Boxes • Ball Bearing Tip To Protect The Sector Shaft • Designed With A Fine Thread Pitch For Reduced Effort During Service • Removable Nut Attachment For Use On Short And Long Sector Shafts

LAN-615

Tie Rod Wrench • For adjusting tie rods on vehicles with rack and pinion steering • Works on most spline, hex, and two flat design tie rods • Spring-loaded upper jaw pivots to accommodate tie rods ranging in size from 10mm–18mm • Wrench is self-adjusting • Cam action increases the gripping pressure as the load applied to the handle increases • Heat-treated for durability

$484. 58

OTC-6295

Front End Service Set • This kit includes five popular tools used for servicing Pitman arms, ball joints, and tie rods on most vehicles • Set includes: • Two Pitman Arm Pullers for large or small ball joint applications • Two Ball Joint Separators • Three different Tie Rod Pullers

$99. 95

CONTROL ARM SERVICE

$184. 95

OTC-6007

Lower Control Arm Triple Action Tool

STABILIZER BAR SERVICE

Lower Control Arm Prying Tool Installing a ball joint on a lower control arm typically requires the effort of two people. However, with this tool and our No. 7420 or 7421 pry bar – or any 7/8" diameter pry bar – it’s a one-person job. No. 6007 – Lower control arm prying tool.

9CL-89102

7’’ Low-profile Sway Bar Link Pliers with Saw teeth • Holds and easily removes sway bar link • Special 3-point gripping design strongly grips and works on rusted nuts, pipes and other objects • Thinner body (compared to 9CL-89101) to tackle limited space problems

$19. 95

$30. 95 9CL-89501

OTC-7832

GM Torsion Bar Unload • Required to safely release the tension on the front suspension torsion bar to service the front suspension. • Larger design to cover the newer GM truck applications. • Application: 2011 & newer HD C/K trucks.

9” Long Sway Bar Link Pliers with Sawteeth • Holds and easily removes sway bar link • Strongly grips and works on rusty nuts, pipes, round- shaped and other objects • Unique teeth design grips an object tighter and tighter when the pliers is turned in the same direction

$173. 95

$39. 95

193

April 1 to June 30, 2019

prices are subject to change and will be confirmed at time of order. please see www.g2sonline.ca/catalog for updates and corrections.