MVF / MVP - Erection Manual

MVF/MVP M echanically S eamed V ertical Leg F lat M echanically S eamed V ertical Leg P encil-rib

®

GENERAL INFORMATION FEATURES AND BENEFITS

1. DESIGN INTEGRITY Chief’s MVF/MVP panel seam is sealed with a factory-applied sealant, a superior grade to mastics applied in the field. 2. FLOATING ROOF The MVF/MVP roof was designed to cope with the forces of expansion and contraction. This is accomplished by allowing the panels to move up and down the roof slope. 3. CLIP SELECTION The clip provides clearance at the purlin for maximum thermal performance. The clip allows for thermal movement, allowing the clip to be used on long spans without the need for expansion joints. Sliding clips are available in high and low versions, allowing for a variety of thermal spacer and insulation thickness combinations. 4. UL 90 RATING The MVF/MVP roof system has earned UL 90 approval 5. SIMPLICITY The panels simply roll together and are machine seamed to provide a weathertight seal. No specialty screws are required to attach clips to the purlins or joist. 6. EASE OF INSTALLATION Chief’s MVF/MVP features a factory applied backer plate which ships preassembled to the roof panel. This means less parts and pieces, improved in-place product, and increased productivity installing the roof. 7. FLEXIBILITY Chief’s MVF/MVP roof system offers welcome flexibility to the erector. Wall covering can be erected before or after the roof is installed in most cases. Panel installation can be an uninterrupted procedure. 8. BUILDING LENGTH Variable building lengths can be covered with Chief’s MVF/MVP, even fractions of an inch. 9. COMPRESSION JOINTS The integrity of any roof system is no better than its joints in the low, and this is where Chief’s system excels. The lap is constructed using high grade, non-skinning, non-shrinking sealant, sandwiched between the top roof sheet and the bottom roof sheet, into the heavy gauge factory applied backer plate. No troublesome cinch plates are required to provide a watertight seal. 10. DURABILITY Every panel is manufactured from acrylic coated Galvalume, your assurance of the Chief commitment to quality. 11. COLOR AND FINISHES MVF/MVP is available in a wide variety of Chief's standard color options. Galvalume ® is a registered trademark of BIEC.

Descriptions and specifications contained herein were in effect at the time this publication was approved for printing. In a continuing effort to refine and improve products, Chief reserves the right to discontinue products at any time or change specifications and/or designs without incurring obligation. Application details are for illustration purposes only and may not be appropriate for all environmental conditions, building designs, or panel profiles. Projects should be engineered to conform to applicable building codes, regulations, and accepted industry practices. Insulation is not shown in these details for clarity. IF THERE IS A CONFLICT BETWEEN THIS MANUAL AND THE ERECTION DRAWINGS, THE ERECTION DRAWINGS WILL TAKE PRECEDENCE.

MVF/MVP-2

Version 2.0

SUBJECT TO CHANGE WITHOUT NOTICE

Made with FlippingBook - Online catalogs