MVF / MVP - Erection Manual

MVF/MVP M echanically S eamed V ertical Leg F lat M echanically S eamed V ertical Leg P encil-rib

®

GENERAL INFORMATION

SUGGESTED TOOLS Commonly used tools are shown to aid in installation. Additional tools will be required.

Screw Gun, Variable Speed, 2000 maximum rpm, with clutch or depth sensing nose piece.

Special Locking Clamps Field assemble the clamps (shown at left) prior to the start of the roof assembly. Use 1” x 1” x 1/8” angle, cut into 6” pieces. Protective felt should be added to the angles to protect the surface of painted panel. These clamps are required to be used at a minimum of every other purlin on the roof. The actual number of clamps required is to be determined by the Erector.

6" Long Angles Welded to the Clamps

Special Locking Pliers C-Clamp

MVF/MVP-4

Version 2.0

SUBJECT TO CHANGE WITHOUT NOTICE