MVF / MVP - Erection Manual

MVF/MVP M echanically S eamed V ertical Leg F lat M echanically S eamed V ertical Leg P encil-rib

®

GENERAL INFORMATION

PRODUCT CHECKLIST

1/4”-14 x 1-1/4” WT (warranted)

#12-14 x 1-1/4"

• Roof Panel to steel. • Roof Trim to steel.

• Panel to steel. • Trim to steel. • Angle to purlins.

5/16" Hex Head with washer (Long life exterior fastener)

5/16" Hex Washer Head with 5/8" O. D. Washer

1/4”-14 x 7/8” WT (warranted)

1/4"-14 x 7/8"

• Roof Panel to panel. • Roof Trim to panel. • Ridge flashing to ridge closure.

• Panel to panel. • Trim to panel.

5/16" Hex Washer Head with 5/8" O. D. Washer

5/16" Hex Head with Washer (Long life exterior fastener)

#17 x 1" WT (warranted)

#12-14 x 1" Pancake Head

• Repair fastener for stripped out.

• Rake angle to purlins, 12 gauge or less.

5/16" Hex Head with Washer (Long life exterior fastener)

#2 Phillips Square Drive

1/8" x 3/8" Blind Rivet

1/4"-14 x 1-1/4" Shoulder

• Floating eave plate to eave strut.

• Trim to trim. • Trim to steel. • Outside/ridge

closure to back-up plate at hip condition.

5/16" Hex Head

Aluminum Body - Steel Shank

#12 - 14 x 1-1/4” WO

#12 - 24 x 1-1/4” WO

• Clip to purlin ≤4" over-the purlin insulation. • Mid-fixed point plate to purlin for <4" over-the purlin insulation.

• Clip to joist ≤4" over-the joist insulation. • Mid-fixed point plate to bar joist for <4" over-the-joist insulation. • Greater than 12 gauge.

5/16" Hex Head

5/16" Hex Head

#12 - 14 x 1-1/2” WO

#12 - 24 x 1-1/2” WO

• Clip to joist for >4" to ≤6" over-the-purlin insulation. • Mid-fixed point plate to purlin for >4" to ≤6" over the-purlin insulation.

• Clip to joist for >4" to ≤6" over-the-joist insulation. • Mid-fixed point plate to bar joist for >4" to ≤6" over the-joist insulation. • Greater than 12 gauge.

5/16" Hex Head

5/16" Hex Head

Version 2.0

SUBJECT TO CHANGE WITHOUT NOTICE

MVF/MVP-7