Bonding and Grounding - Communication (CA12005E)

Meter Box Clamps

METER BOX CLAMPS WITH TOP-TIGHTENING GROOVE CONTACT POINT Description

Meter box bonding and grounding connector

EM-MB6

Application

Bonding and grounding telco and CATV to power ground.

Gel-filled cap

Features

• Stainless steel and copper alloy to reduce corrosion. • Applies with a standard terminal wrench/nut runner—no special tools. • Gel-filled cap helps prevent corrosion at the piercing points. • Easy, foolproof installation. • Mounts on the side—does not interfere with the cover or collapse the sides. • Small and inconspicuous. • Accommodates #6–#14 AWG solid or stranded ground wire. • Makes electrical contact under the dripcap of the box, on bare, unpainted metal. • Available with an extra-long body, to accommodate meter boxes with an extended lip on the top cover.

Ordering information

EM-MB6 – Meter Box Clampwith top-tightening groove contact point and gel-filled cap

EM-BB4-NP

EM-MB6-NP – Meter Box Clamp with top tightening groove contact point and alternate cap (not gel-filled) to cover the prongs and bottom.

BONDING &

GROUNDING

Add suffix -XL for extra-long body.

C

US

LISTED 84D8

For more meter box clamps, see the IntersystEM-Bonding Terminal section, starting on page G94.

For Electric Motion Company (EMC) part numbers starting with “EM” please contact EMC customer service at 860-379-8515 or cs110@hubbell.com

Page G88 | August 2022