TPT March 2008

The company is a supplier of laser-based systems for high-precision measurements of geometric dimensions, such as position, width, thickness, length, diameter and flatness. The company excels in providing ultra-precise measurement results under the harshest operating conditions. LAP will also show its redesigned RDMS software for contour measurements of tube and wire. The new software responds to the growing trend of integrating RDMS systems deeper into the production processes – even as cross-plant configurations for use within networked systems. Due to their compact design and high flexibility, RDMS systems have become established as a reliable technology for inline contour measurements of tube, bar and wire rod. More than one hundred RDMS systems have already been installed in rolling mills. For the first time, LAP will also present the new RDMS-40 profile measuring system for inline contour measurements. This equipment has been specially developed for wire rod in diameters below 40mm and for mills operating at speeds of up to 120m/s.

expertise. The knowledge and experience that has been developed over the past 45 years provides world class and innovative pipe manufacturing equipment and technologies from the strip entry to the packing machine and everything in-between. The models on display will provide an opportunity for visitors to witness the technology involved. Kusakabe is continually developing new ideas and concepts to address the challenges faced by the tube and pipe manufacturer.

machining. The flange pressure scope is PN6 to PN40 and 150 up to 300lb, with diameters of DN 10 to DN 300. The flanges are manufactured from steel grades S235JRG2/Rst37-2, C22.8, P250GH, P245GH, BF42 15Mo3/16Mo3, A105, C21, A350, LF2, BF48, 1.4541, 1.4571, 1.4306/304L, and 1.4404/316L. Kuznia Jawor is certified according to ISO 9001:2000, PED 97/23/EG (DGRL), TUV, GL, LRS, and UDT. Website : wwww.kuznia.com.pl

Website : www.kusakabe.com

LAP Laser GmbH Germany

5G01

Kuznia Jawor SA Poland

7.1B50

At Tube 2008, LAP will display a robot- controlled measurement for the inner and outer contour of tube ends with diameters above 100mm. Using laser triangulation sensors, the system measures the complete inner and outer profile as well as the wall thickness in one 360° revolution of the sensor arm. The system can be used in longitudinal and transverse tube transport.

Kuznia Jawor SA offers a production range including steel flanges, die forgings for the automotive industry and die forging based components. The steel flanges are supplied with connections according to EN 1092- 1, DIN, NFE, ASME/ANSI, and special

Website : www.lap-laser.com

!2,! š %NDWORKING 5NITS FOR 4UBES AND 0IPES IN &INISHING -ACHINERY

s COMPLETE MACHINE FOR SINGLE SIDED OR DOUBLE SIDED ENDWORKING s PRECISE SLIDE AND SPINDLE UNITS DRIVEN BY SERVOMOTORS s TYPICAL OPERATIONS DRILLING BORING MILLING THREADING TAPPING FACING CHAMFERING DEBURRING SUPPORTED BY (3+ TOOLS OR FACING HEADS s POWERFUL !2,! WORKHOLDING TECHNOLOGIES s SPECIAL PURPOSE SOLUTIONS

!2,! š #LAMPING 3YSTEMS #ENTRALIZED 7ORKHOLDING FOR %NDWORKING -ACHINERY

s ACTUATION PNEUMATIC OR HYDRAULIC s WORKPIECE SIZE b h n h MAX /$ s CLAMPS IN SLIM DESIGN s PRECISE CLAMPING REPEATABILITY NO CENTER ADJUSTMENTS

s SHORT CLAMPING TIME HIGH CLAMPING FORCE s CHANGEABLE JAW SETS

#OME AND VISIT US 45"% -ARCH n !PRIL $UESSELDORF 'ERMANY (ALL B "OOTH ' !2,! -ASCHINENTECHNIK 'MB( s (ANSESTR s $ 7IPPERFUERTH s '%2-!.9 0HONE s &AX s WWW ARLA DE s % MAIL INFO ARLA DE

›

129

www.read-tpt.com

M arch 2008