TPT March 2008
handling, storage and despatch of finished products. Since the introduction of the original IC powered Combilift some years ago, the company has, on average, launched a new model each year. Capacities range from 2.5t to 14t, with a choice of diesel, LPG and the more recently introduced electric power options. The wide variety of lift capacities, mast heights, platform dimensions and range of available attachments means that each Combilift is effectively purpose- built to provide a customised handling solution.
œ
Condat France
10D56
Condat will display its extensive range of lubricants covering all industrial needs in the fields of rod wire, cold rolling, wire drawing, drawing of bars and tubes, and cold heading. Products include Vicafil ® lubricants for wire drawing applications, Steelskin ® specific high tech dry lubricants, Lubrinox ® specialised oil range for stainless steel applications, and Steagel ® grease and paste for all applications. Other products include the Condatub special range for steel tube and bar applications, Galvasmooth ® range for
› Oils and powders from Condat
Website : www.combilift.com
galvanising wires (for hot dip processes), the Condaclean range of cleaners for all applications, and Extrugliss ® dual purpose oil range for cold heading applications. The company will present its ‘Pellet’ dry lubricant technology, a dust-free lubricant range which provides low soap consumption. Condat will also display its latest lubricant developments that comply with the most recent European legislations and constraints (Reach), and the first environmentally friendly alternative to zinc phosphate coatings for cold heading with its Vicafil and Extrugliss product lines.
Website : www.condat.fr
Couth Butzbach GmbH Germany
5B24
Couth Butzbach GmbH is a specialist manufacturer of tools for direct part marking. These marking tools are used for conventional marking, such as hand stamps or punching dies. They can also be used with a semi-automatic installation of such tools in unroll machines or presses for the marking of pipes. If marking is carried out from one pipe to the next with constantly changing text, it can only be controlled by dot marking machines. The related controller will controls the marking of numbers, letters, logos and data matrix code. These dot marking machines can achieve marking speeds of up to 16 characters per second and penetration depths of up to 0.8mm.
œ
88 ›
M arch 2008
www.read-tpt.com
Made with FlippingBook