2018 Marathon Motors Catalog

First page Table of contents Previous page 253 Next page Last page

ACCESSORY KITS - MULTIPLIER SYMBOL E3

ENCODER STUB SHAFT KIT Fits XRI ® Severe Duty or XRI IEEE-841 motors to allow the addition of 1” borehollow shaft encoders on opposite drive end of motor.

CAT. NO.

KIT NO.

LIST PRICE

FRAME

WT.

WHERE USED

A807

KIT STUBSHAFT 1IN $268

182T-449T/TS

3

FAN COOLED SEVERE DUTY AND IEEE-841

WARNING: Encoder stub shaft may not be installed on motors used in Division I or Division 2 hazardous locations.

SHAFT GROUNDING KITS Shaft grounding: Shaft grounding is recommended (NEMA ® MG1 31.4.4.3) as an effective means of bearing protection for motors operated from inverter power. One grounding device is adequate to bleed down inverter-sourced shaft voltages, thereby protecting both bearings for motors as large as 6085 frame. BCP KIT: Kit includes grounding ring, adhesive mounting hardware and instructions (for domestic produced products only).

BCP UNIVERSAL KIT: Kit includes grounding ring, all mounting hardware needed to mount to any standard

drive end bracket and instructions. BCP UNIVERSAL SPLIT RING KIT

Kit is designed to allow BCP mounting without uncoupling the motor. Kit includes grounding ring, all mounting hardware needed to mount to any standard drive end bracket and instructions. Shaft ground rings fit these NEMA frame shaft extensions listed below, they are designed to mount on the shaft end. For larger frames, please contact Regal.

BCP KIT

BCP UNIVERSAL KIT

BCP UNIVERSAL SPLIT RING KIT

KIT NO.

CAT. NO.

LIST PRICE $347 $347 $370 $402 $453 $559 $547 $668 $559 $773 $668 $878 $668

KIT NO.

CAT. NO.

LIST PRICE

KIT NO.

CAT. NO.

LIST PRICE

FRAME

WT.

WT.

WT.

48 56

KIT SGR-11.2 A500-5 KIT SGR-14.4 A500-8

1

––

––

––

––

––

––

––

––

1 KIT SGR-0.625-UK A499-1 1 KIT SGR-0.875-UK A499-2 1 KIT SGR-1.125-UK A499-3 1 KIT SGR-1.375-UK A499-4 1 KIT SGR-1.625-UK A499-5 1 KIT SGR-1.875-UK A499-6 1 KIT SGR-1.625-UK A499-5 1 KIT SGR-2.125-UK A499-7 1 KIT SGR-1.875-UK A499-6 1 KIT SGR-2.375-UK A499-8 1 KIT SGR-1.875-UK A499-6 1 KIT SGR-2.875-UK A499-9 1 KIT SGR-2.125-UK A499-7 1 KIT SGR-3.375-UK A499-10 1 KIT SGR-2.375-UK A499-8 1 KIT SGR-3.375-UK A499-10 1 KIT SGR-2.375-UK A499-8 1 –– ––

$539 $582 $623 $665 $832

5 KIT SGR-0.625-1A4-UK A495-1 5 KIT SGR-0.875-1A4-UK A495-2

$858 $939

5 5

143-145T KIT SGR-20.7 A500-14 182-184T KIT SGR-27.1 A500-20 213-215T KIT SGR-33.4 A500-26 254-256T KIT SGR-39.8 A500-32 250JM/JP KIT SGR-43.0 A500-35 284-286T KIT SGR-46.1 A500-38 284-286TS KIT SGR-39.8 A500-32 324-326T KIT SGR-52.5 A500-44 324-326TS KIT SGR-46.1 A500-38 364-365T KIT SGR-58.8 A500-50 364-365TS KIT SGR-46.1 A500-38 404-405T KIT SGR-71.5 A500-62 404-405TS KIT SGR-52.5 A500-44 444-445T KIT SGR-84.2 A500-74 444-445TS KIT SGR-58.8 A500-50 447/449T KIT SGR-84.2 A500-74 447/449TS KIT SGR-58.8 A500-50 5000LS KIT SGR-71.5 A500-62

5 KIT SGR-1.125-1A4-UK A495-3 $1,030 5 5 KIT SGR-1.375-1A4-UK A495-4 $1,091 5 5 KIT SGR-1.625-1A4-UK A495-5 $1,334 5 5 KIT SGR-1.875-1A4-UK A495-6 $1,456 5 5 KIT SGR-1.625-1A4-UK A495-5 $1,334 5 7 KIT SGR-2.125-1A4-UK A495-7 $1,608 7 5 KIT SGR-1.875-1A4-UK A495-6 $1,456 5 7 KIT SGR-2.375-1A4-UK A495-8 $1,739 7 5 KIT SGR-1.875-1A4-UK A495-6 $1,456 5 7 KIT SGR-2.875-1A4-UK A495-9 $2,088 7 7 KIT SGR-2.125-1A4-UK A495-7 $1,608 7 7 KIT SGR-3.375-1A4-UK A495-10 $2,621 7 7 KIT SGR-2.375-1A4-UK A495-8 $1,739 7 7 KIT SGR-3.375-1A4-UK A495-10 $2,621 7 7 KIT SGR-2.375-1A4-UK A495-8 $1,739 7 –– KIT SGR-4.875-1A4-UK A495-14 $3,990 7 –– –– –– ––

––

––

$915 $832

$1,041

$915

$1,125

$915

$1,299

$1,458 $1,041 $1,960 $1,125 $1,960 $1,125

$773

$1,862

$878

$1,862

$878

$1,299

1

––

––

––

REPLACEMENT GROUND BRUSH MOUNTING HARDWARE AND BRUSHES

CONDUCTIVE EPOXY: Epoxy comes is two 7g syringes, 14g (0.35 oz). This two part epoxy offers high electrical conductivity and strong conductive bonding. Use in place of traditional end bracket drilling.

CAT. NO.

KIT NO.

LIST PRICE $556 $803

WT.

COMMENTS

A103 A116 A109

KIT 103 KIT 116 KIT 109

1 Drive end mount 1 Non-drive end mount 1 Replacement brush

CAT. NO.

KIT NO.

LIST PRICE $814

WT.

$88

A496

EP2400

2

WARNING: Grounding devices may not be installed on motors used in Division 1 or Division 2 hazardous locations.

ACCESSORIES/KITS

All Kits Listed On This Page Are Stock NEMA is a trademark of National Electrical Manufacturers Association. All Rights Reserved.

253

Prices and specifications are subject to change without notice.

Made with FlippingBook - professional solution for displaying marketing and sales documents online