WCA September 2010

wire China 2010

100mm 之间自由调整，最大达到 6,500 扭 / 分。卷取力是可调整的，并通过称重 传感器控制在整个线轴填充的紧密度限 制 内 。 这 台 机 器 可 随 意 配 置 NBAT(Niehoff 合股自动移动 ) 装置，可以 利用光电传感器自动检测卷筒盘和控制 卷盘移动宽度。 Maschinenfabrik Niehoff GmbH & Co KG – Germany/ 德国 Fax/ 传真 : +49 9122 977155 Email/ 电子邮件 : info@niehoff.de Website/ 网址 : www.niehoff.de Shanghai Representative Office/ 上海代表处 Email/ 电子邮件 : info@niehoff.cn Officine Meccaniche di Lesmo, or OM Lesmo, was established in 1962 for the manufacture of rotating equipment for the wire, cable and steel rope manufacturing industries. The group consists of Lesmo Machinery Germany, Lesmo Machinery America, SCS and Eurodraw Energy. The OM Lesmo Group production programme includes: Tubular stranders for steel, copper • and aluminium Bow skip stranders up to 1,600mm • diameter Planetary back twist stranders for • electric, telephone, fibre-optic and steel cable Single twist stranders up to • 2,000mm diameter Rod breakdown for aluminium and • copper with the option to simultaneously produce two different diameters Multi-wire machine for up to 40 • wires Single automatic/manual spooler, • double automatic spooler and automatic basket collectors Rod breakdown machine for m m aluminium, aluminium alloy or copper OM Lesmo Group................. W1A23

copper wires and covers a finished wire diameter range from 0.05mm to 1.35mm. The largest machine of the MMH range is capable of drawing up to 48 wires. In addition to multi-wire drawing machines for copper wire, Niehoff offers 8 and 16-wire drawing machines with corresponding con- tinuous annealers for aluminium and aluminium alloy wires. The D 631 double twist bunching machine accommodates spools with a maximum flange diameter of 630mm. It is designed for strands with a diameter of 0.09mm 2 to 6mm², and the lay length can be freely adjusted from 6mm to 100mm with a maximum of 6,500 twists/minute. The winding force is adjustable and controlled within tight limits across the entire spool filling by means of a load cell. Optionally, the machine can be equipped with the NBAT (Niehoff bunching automatic traverse) device which detects automatically spool flanges and controls the traverse width of spools by means of opto-electronic sensors. RM 141 continuous annealer as m m part of an MMH 101 drawing line

When you use PCD and Diamond dies, you expect very high quality standards. Sanxin PCD and Diamond dies cover the full range and they provide all the quality and performance that you demand, plus a bit.

And Sanxin’s prices are far below what you might have thought.

Please visit Sanxin at stand W2C51 in Shanghai. All will become clear.

While you are with us, be sure to ask about Nano Dies, the new Nanocrystalline Diamond Composites that are re-writing the standards for Compacting and Stranding operations.

Sanxin Wire Die, Inc. A full range of Diamond, PCD and Nano Dies for All Applications

Email : admin@sanxinamerica.com Website : www.sanxinamerica.com

RM 141

连续退火装置作为 MMH 101

❍ ❍

拉丝生产线的一部分

Maschinenfabrik Niehoff 和其上海办事 处将展示一个 MMH 101 多线拉丝机，带 集成的 RM 141 电连续退火装置，以及 一台 D 631 告诉双绞机，带 ARH 630 放 线装置。 展出的 MMH 101 拉丝机设计用来在一个 平面上拉制单根直径为 0 . 15mm 和 0.5mm 之间的八根线。这是用于铜线拉 制的多线拉丝机 MMH 系列的一部分， 覆盖 0.05mm 到 1.35mm 的完线直 径。 MMH 系列最大的机器能够拉制 48 线。 除了用于铜线的多线拉丝机， Niehoff 还 提供 8 和 16 线拉丝机与相应的连续退火 装置，用于铝及铝合金线拉制。 D 631 双绞合股机可容纳最大 630mm 法 兰直径的线盘。设计用于 0.09mm 2 到 6mm² 直径的线，节距可在 6mm 到

用于铝、铝合金或铜的粗拉机

❍ ❍

Officine Meccaniche di Lesmo 或 OM Lesmo ，成立于 1962 ，为电线、电缆和 ➣➢➣

wire China 2010 – Shanghai New International Expo Centre 21 st -24 th September 2010 111