TITAN FLOW CONTROL CATALOG - 0919

RP-1015

RESTRICTION ORIFICE PLATES

Standard Bore

A Restriction Orifice Plate is a device used to restrict flow. It reduces flow and pressure from the upstream side to the downstream side. This is beneficial in order to reduce noise and protect downstream equipment. FlowMeasuring Orifice Plates are also available. Please contactTitandirectly formore information regarding FlowMeasuringOrificePlates.

Model

Material

RP 21 CS RP 21 SS

Carbon Steel Stainless Steel

Multi-Hole Bore

Materials Standard materials for orifice plates are stainless steel and carbon steel. Contact factory for additional materials such as ceramic, fiberglass reinforced plastic, duplex stainless steel, etc. Bore Diameter Sizing of the restriction orifice is specified by the customer in order to meet specific application requirements. For reference, see below for common design options. Codes & Standards Currently, there are no corresponding codes or standards that address Restriction Orifice Plates. Handles Orifice plates can be ordered with or without a handle. Handles are generally 1”wide by 3 3/4”long. Additional Design Options Restriction Orifice plates can have a variety of specifications. Bores can be placed concentrically or eccentrically with the pipe and can have a full or segmented opening.

Eccentric Bore

RP 21 Restriction Orifice Plate

Illustration represents a Titan FCI Orifice Plates. Titan FCI’s fabricated products are made to each customer’s unique specifications, and therefore, illustrations may not be accurate for all orifice plates. All materials, illustrations, and product details referenced in this literature are general in nature. Some options may not be available in all sizes and/or models. TitanFCI reserves the right tomakedesign and specification changes to improve the products without prior notification. For exact product specifications, please consult the Titan FCI factory and requestcertifiedengineeringdrawings.

Bore Ø To Be Specified by Purchaser

Ø=½”

Multi-Stage Restriction Plate Assembly

B

ØA

Allpictures shownare for illustrativepurposesonly.Actualproductmayvarydue toproductenhancement.

Tel: 910-735-0000 • Fax: 910-738-3848 • titan@titanfci.com 290 Corporate Drive • PO Box 7408 • Lumberton, NC 28358

TITAN

www.titanfci.com

®

TITAN FLOW CONTROL, INC

25

Made with FlippingBook - Online catalogs