TITAN FLOW CONTROL CATALOG - 0919

CV41A-0517

CHECKVALVE •WAFERTYPE • DUAL DISC MODEL: CV 41A-DI (Ductile Iron Body)

TITAN FLOW CONTROL, Inc. 290 Corporate Drive E-mail: titan@titanfci.com Lumberton, NC 28358 Web: www.titanfci.com Tel: 910.735.0000 Fax: 910.738.3848

ASME Class 150

TITAN

Buna-N,Viton, or EPDM Seats Stainless Steel or Bronze Discs

ØE ØD ØB

BILL OF MATERIALS (1)

8

No.

PART

CV 41A-DI (3)

1

Body

Ductile Iron ASTMA536

2

2

Seat (5)

Buna-N/Viton/EPDM

A

Aluminum BronzeASTM B148 / Stainless Steel ASTMA351 Gr. CF8M

Disc (2)

3

Stainless Steel ASTMA182 Gr. 316

4

Spring ( 2 )

ØC

6

2

Stainless Steel ASTMA182 Gr. 316

5

Shaft/Stop Pin

TopView - Cutaway

6

Set Screw

Galvanized Carbon Steel

1

7

Eye Bolt ( 4 )

Carbon Steel (Not Shown)

6

3

Seal Plug

8

Buna-N/Viton/EPDM

4

1. Bill of Materials represents standard materials. Equivalent or better materials may be substituted at the manufacturer's discretion.

2. Denotes recommended spare parts. 3. Ductile Iron bodies are NSF coated. 4. Eye Bolt is available on larger sizes only.

Outlet Side

5

Ductile IronApplication Notes: Ductile Iron maintains the anti-corrosive properties of Cast Iron while achieving a yield strength comparable to Carbon Steel. Ductile Iron also offers higher pressure/temperature ratings than Cast Iron. Ductile IronASME Class 150 has the same bolting pattern as Cast IronASME Class 125.

DIMENSIONS AND PERFORMANCE DATA (1)

2 2 1 / 2

3

4

5

6

8

10

12

14

16

18

20

24

in

SIZE

mm 50 65 80 100 125 150 200 250 300 350 400 450 500 600 in 2.12 2.38 2.62 2.62 3.25 3.75 5.00 5.50 7.12 7.25 7.50 8.00 8.38 8.75 mm 54 60 67 67 83 95 127 140 181 184 191 203 213 222 in 4.02 4.76 5.24 6.73 7.60 8.62 10.87 13.23 15.98 17.64 20.12 21.50 23.74 28.11 mm 102 121 133 171 193 219 276 336 406 448 511 546 603 714 in 2.17 2.92 3.45 4.12 5.67 6.43 8.56 10.43 12.21 14.17 16.13 17.32 20.10 23.66 mm 55 74 88 105 144 163 217 265 310 360 410 440 511 601 in 2.58 3.15 3.70 4.61 5.71 6.69 8.82 10.43 12.20 14.17 16.14 17.72 19.88 24.57 mm 66 80 94 117 145 170 224 265 310 360 410 450 505 624 in 1.66 2.28 2.78 3.38 4.53 5.49 7.40 9.14 10.65 12.97 14.63 16.26 18.17 22.62 mm 42 58 71 86 115 140 188 232 271 330 372 413 462 575 5.2 7.0 14.0 18.0 26.5 43.0 70.0 108.0 175.0 200.0 258.0 345.0 460.0 lb

A DIMENSION FACETO FACE (2)

ØB DIMENSION OUTLET OUTSIDE DIAMETER ØC DIMENSION INLET INSIDE DIAMETER ØD DIMENSION OUTLET INSIDE DIAMETER ØE DIMENSION MINIMUM BORE DIAMETER

3.3 1.5

ASSEMBLED WEIGHT

kg

2.4

3.2

6.4

8.2 12.0 19.5 31.7 48.9 79.4 90.7 117.0 156.5 208.7

C v 62 110 175 350 550 850 1500 2400 3700 5400 8250 10400 14200 23000 psi ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25

Flow Coefficient

Cracking Pressure (3)

3. Cracking pressure is for horizontal installations only. For vertical installations, please consult factory.

1. Dimensions and weights are for reference only. When required, request certified drawings. 2. Face to face values have a tolerance of ±0.06 in (±2.0 mm) for sizes 10" and lower and a tolerance of ±0.12 in (±3.0 mm) for sizes 12" and larger. PRESSURE -TEMPERATURE RATINGS (1)

REFERENCED STANDARDS & CODES

CODE API 594

DESCRIPTION

Valve Design and Manufacture Face-to-Face Dimensions

250 °F MaxTemp Buna-N Seat

300 °F MaxTemp EPDM Seats

AWWA C518 ASME B16.34 ASME B16.42

250

400 °F Max Temp Viton Seat

Valves - Flanged,Threaded, andWelding End Ductile Iron Pipe Flanges and Flanged Fittings

Ductile IronASTMA536 ANSI Class 150

450 °F Max Temp SS Spring

200

API 598

Valve Inspection and Pressure Test

150

PRESSURE / TEMPERATURE RATING - ASTMA536 Body Material Class 150 (2" ~ 24") WOG (Non-shock) : 250 PSI @ 100 °F

Pressure (PSI)

100

50

SEATAND SPRINGTEMPERATURE RATING

Seat Material

Range Spring Material

Max

0

-50

50

150

250 300 400 450

550

650

EPDM:

-30 ~ 300 °F SS ASTMA182 Gr. 316:

450 °F

Temperature (°F)

BUNA-N:

-20 ~ 250 °F -40 ~ 400 °F

1. The above chart displays the pressure-temperature ratings for the valve's body material per ASME B16.42. Max temperature limits have been added for seat and spring materials.

VITON:

Titan FCI makes every effort to ensure the information presented on our literature accurately reflects exact product specifications. However, as product changes occur, there may be short-term differences between actual product specifications and the information contained within our literature. Titan FCI reserves the right to make design and specification changes to improve our products without prior notification. When required, request certified drawings.

Made with FlippingBook - Online catalogs