Ultracentrifugation Catalog

www.centrifugebybeckman.com

Tools and Supplies

Required Tools

If you’re running capped tubes in the following rotors: Types 90 Ti, 75 Ti, 70.1 Ti, 70 Ti, 60 Ti, 55.2 Ti, 50.2 Ti, 50 Ti, 45 Ti, 42.1, 35, or MLA-55, you’ll need the following tools. Tools also needed for Types 30 and 21 rotors if capped thickwall tubes are used. 331202 Tool Kit 305075 Cap Vise If you’re running 337927 caps in the Type 70 Ti rotor, you’ll need: 338841 Tool Kit 305075 Cap Vise

If you’re running Quick-Seal tubes, you’ll need: 358312 Tube Topper Kit, 60 Hz (U.S./Canada/Japan) 358313 Tube Topper Kit, 50 Hz (for Europe) 358314 Tube Topper Kit, 50 Hz (for Great Britain) 358315 Tube Topper Kit, 50 Hz (for Australia) Note: For further information, refer to the specific technical bulletin from the Technical Publications Department.

Tools for Fixed-Angle Rotors (see also Tools for Quick-Seal Tubes)

301875 Removal Tool, for capped tubes

841884 Hex Driver, for 5 ⁄ 16

-in. (8 mm) hex nuts

3

302460 Nylon Insert Tool, for cap stem filling hole

858122 Socket Adapter, for 858123 Socket below

305075 Tube-Cap Vise

858123 Socket, for tightening red, blue, and black aluminum caps, 3 ⁄ 4 -in. (19 mm) hex nut

870432 Socket, for tightening titanium caps (cap 341968), 7 ⁄ 16 -in . (11 mm) hex nut

841883 Hex Driver, for 7 ⁄ 16

-in. (11 mm) hex nuts

3-2

Beckman Coulter Ultracentrifuge