Ultracentrifugation Catalog
www.centrifugebybeckman.com
Accessories
Fraction Recovery System
Two types of systems are available: one with a flatbottomed cap, and those with hollow-cone caps. Using the flat-bottomed cap, sample is removed through a puncture hole in the bottom of the tube. This cap fits any tube diameter and must be used to fractionate Quick- Seal tubes. The four hollow-cone cap systems are used for sample recovery from tubes that cannot be punctured or for recovery from the tops or bottoms of puncturable tubes. Each hollow-cone system is for a single tube diameter. System Part Numbers 342023 Fraction Recovery System with Hollow-cone Cap for 1 ⁄ 2 -in. Tubes. 342024 Fraction Recovery System with Hollow-cone Cap for 5 ⁄ 8 -in. Tubes. 342025 Fraction Recovery System with Hollow-cone Cap for 7 ⁄ 16 -in. Tubes. 342026 Fraction Recovery System with Hollow-cone Cap for 1-in. Tubes. 343890 Fraction Recovery System with flat-bottomed Cap for puncturing all Tubes, including Quick-Seal Tubes*. Hollow-Cone Caps 331562 Hollow-cone Cap for 1-in. diameter Tubes 331563 Hollow-cone Cap for 1 1 ⁄ 4 -in. diameter Tubes 331564 Hollow-cone Cap for 5 ⁄ 8 -in. diameter Tubes 331565 Hollow-cone Cap for 1 ⁄ 2 -in. diameter Tubes 331566 Hollow-cone Cap for 9 ⁄ 16 -in. diameter Tubes
Lock-ring Colar 339194 Spring 878224
HOLLOW -CONECAPASSEM BLY
Thum bscrew
Plug 331593
Drain Tube 331598
Bushing 331594 O-ring 807475
UpperM ount 343787
Holow-cone Cap Plug
331593
O-ring 863590 Plug
Gasket
3
Swivel Fitting 313336
885086 GuidePost 343781
Tube Support Shaft*
LowerM ount
FLAT-CONECAPASSEM BLY
Flat-bottom ed Cap 339192
Tube M ounting Pad 343785
Thum bscrew 343795
SwivelFitting 313336
Needle Assem bly 343786
Gasket 339191
331586 Gasket for 331566 Cap 331587 Gasket for 331565 Cap 331588 Gasket for 331564 Cap 331589 Gasket for 331563 Cap 331591 Gasket for 331562 Cap 334310 Hollow-cone Cap for 7 ⁄ 16
Teflon Tubing
Seal,Cushion 331601
Ringstand
-in. diameter Tubes
334312 Gasket for 334310 Cap Replacement Parts for Discontinued 339187 Univer- sal Fraction Recovery System 331584 Piercing Screw 343786 Needle Assembly 343804 Retrofit Kit, includes lower mount (shown left) for lever puncturing to 343890 819838 Setscrew with plastic tip
* 346105 Tube Support Shaft, 2-in., 346106 Tube Support Shaft, 3-in., both included in 343890.
3-10
Beckman Coulter Ultracentrifuge
Made with FlippingBook Learn more on our blog