EuroWire May 2015

wire Russia 2015

Decalub green cleaning TecHnOlOgieS FOcuS On: Wire Cleaning ( for plating and high glossy finish )

➢➣➢

X-Compound, the new company of the Troester Group, will join the booth and present its kneader technology for the continuous compounding of HFFR (LSOH), PVC, XLPE, semiconductive materials and EPR/EPDM. X-Compound is specialised in the planning and construction of complete systems for the compounding of plastics with the process steps conveying, melting, dispersing, mixing and degassing. Troester GmbH & Co KG – Germany Website : www.troester.de

Providing a separate transformer just for the supply of the welding machine is not only expensive, but also approaches the limits of what is physically possible. Type MK 1200 has a nominal capacity of 1200 KVA - with a 3-phase direct current transformer. This drastically reduces the current required, nearly cutting it in half. In a conventional transformer, the mains voltage is reduced (eg from 460V to 15V). Two phases of a three-phase mains network are loaded (both phases AC = alternating current). In a three-phase transformer, the input voltage is also reduced to 15V, but at the same time, the alternating current is converted to direct current. The transformer is connected to all three phases of the mains supply. The biggest advantages are: • Lower current load for each individual phase • Balanced load for all three phases • Higher capacity/higher secondary voltage August Strecker GmbH & Co KG – Germany Website : www.strecker-limburg.de Troester GmbH & Co KG is a worldwide manufacturer of complete extrusion systems for the cable industry. The company will present its technology and solutions in the eld of: • Rubber CV and CCV-lines up to 35kV • XLPE CCV and VCV lines for power cables up to 500kV • Sheathing lines for medium and high voltage cables • Silane lines for LV and MV cables Troester GmbH Stand FOD33

Wire Rod Lubrication ( for frictionless drawing )

WiTechs GmbH Stand FOD45

Rod Dry Preparation ( with no speed limit )

WiTechs has developed over the last two years a new system for endless sanding of wire. The priority was the development of a system which would be able to produce defect-free wire rod surfaces, for example for spring steel applications.

DECALUB 31, avenue de Condé 77500 CHELLES, FRANCE E-mail: info@decalub.com Website: www.decalub.com

Extruder and kneader from the Troester Group

▼

Longitudinal sanding machine

▲

Due to the special design the machine also allows high-speed sanding of up to 6m/s inlet speed, for example in front of single- or double-block drawing machines. The innovation lies in the sand belt guidance which is in the longitudinal direction. A sanding surface pattern is built in the wire direction. This system complements the in-house developed yer-grinding technology which has existed for several years. That technology works by means of three sand-belt rolls on a common yer disc that is continuously rotating around the wire rod. The new so-called longitudinal sanding machine SEZ 8-150 was presented during

wire Russia – Krasnaya Presnya Expo fairgrounds, Moscow, Russia 12 th -15 th May 2015

76

May 2015