2014 Locke Supply Co.

www.americanstandard.com

Valve Bodies

Temperature Control Valve Bodies

TRIM must be ordered separately.

• Mixing valve cycles from “Off” to “Cold” to “Warm” to “Hot” • Hot limit safety stop • 47 mm ceramic disc valve cartridge with back-to-back capability • Solid brass valve body with nominal 1/2" inlets/outlets

• Roughing-in depth – Pressure balance: 1-1/2" to 3-1/4" (measured from center of inlet to finished wall surface) • Plaster guard can be used as thin-wall support plate

Pressure Balance Valve Body Description

Locke Number

Vendor Number

Special Order

Rough Valve Body • Direct sweat inlets/outlets

A2577

R110

Special Order

R110SS

Same as Above • With screwdriver stops

Rough Valve Body • Female thread I.P.S. inlets/outlets

A2579

R115

Same as Above • With screwdriver stops

Special Order

R115SS

Rough Valve Body • 1/2" PEX inlets/direct sweat outlets • To be used with crimp ring system

A2578

R117

Same as Above • With screwdriver stops

Special Order

R117SS

Volume and Temperature Control Valve Bodies

TRIM must be ordered separately.

• Mixing valve with volume control and hot limit safety stop • 47 mm ceramic disc valve cartridge • Solid brass valve body with nominal 1/2" inlet/outlet

• Roughing-in depth – Pressure balance: 1-1/2" to 3-1/4" (measured from center of inlet to finished wall surface) • Plaster guard can be used as thin-wall support plate

Pressure Balance Valve Body Description

Locke Number

Vendor Number

Special Order

Rough Valve Body • Direct sweat inlets/outlets

A2576

R120

Same as Above • With screwdriver stops

A2551

R120SS

Valve Bodies

Rough Valve Body • Female thread I.P.S. inlets/outlets

A2550

R125

Same as Above • With screwdriver stops

Special Order

R125SS

Rough Valve Body • 1/2" PEX inlets/direct sweat outlets • To be used with crimp ring system

A2558

R127

Same as Above • With screwdriver stops

Special Order

R127SS

71

www.lockesupply.com