Bullard QXT Thermal Imager


The charger mounts on its long side using (4) provided 5/16" self-tapping hex screws.

Two wires on the back of the charger apply power from the vehicle, color-coded red positive (+) and black negative (-). Apply power from a 12-24 VDC 5-Amp fused power source (user supplied and installed.) Connect to an unswitched circuit which provides power at all times.

Vertical and horizontal mounting are suitable.

The four pins of the Interface Ring align with corresponding holes on the bottom of the imager. The Interface Ring is field-replaceable if worn.

Off-vehicle usage is supported through an optional 12 VDC power supply.

Made with FlippingBook - professional solution for displaying marketing and sales documents online