Bullard QXT Thermal Imager


When charging, imager power button pulses RED. When fully charged, the button changes to GREEN.

Three status LED's surround the Interface Ring: WHITE Power on BLUE Imager connected AMBER Fault detected

Wireless charging surface must remain free of debris for good connection with the imager.

Power the charger using the provided 12 VDC power supply.

Place the imager onto the charger by aligning the Interface Ring pins with corresponding holes on the imager. When seated, the charger emits a short beep and the BLUE LED indicates connection between imager and charger.

Made with FlippingBook - professional solution for displaying marketing and sales documents online