Compression Terminals (DF) - Distribution Connectors

ALUMINUM LONG BARREL TERMINAL LUGS FOR MOUNTING ON TOP OF TYPE AHL LUGS TYPE ATL STEPPED LUG

ALUMINUM ATL

• Offset heights and mounting pad dimensions allow ATL-lugs to be stacked on top of AHL-lugs so that two conductors can be connected to each NEMA two hole position on a terminal spade or bus bar (see illustration below). • Rated for aluminum conductors at Code ampacities • The same crimping dies install this series as used on the AHL type. Connectors are prefilled with rubber compatible electrical joint compound and plugged. • For copper conductor, see type CSL.

Material: Aluminum Note: Add suffix “TP” to specify tin plating.

Product Data & Conductor Size

DF 6

CONDUCTOR RANGE

DIMENSIONS INCHES (MM)

CONCENTRIC & COMPRESSED STRAND RATING

(1) COMMON CRIMPING DIES

DIAMETER RANGE -INCHES- .358-.373 .398-.424 .448-.470 .503-.530 .550-.576 .607-.636 .654-.684 .720-.740 .784-.814 .856-.893 .964-1.000 .964-1.000 1.000-1.048

APPROX. WT./100 LBS. (KG) 11 (5) 20 (9) 23 (10) 29 (13) 30 (14) 47 (21) 61 (28) 67 (30) 84 (38) 103 (47) 143 (65) 147 (67) 264 (120)

CATALOG NUMBER ATL10BN ATL20BN ATL30BN ATL40BN ATL250BN ATL300BN ATL350BN ATL400BN ATL500BN ATL600BN ATL700BN ATL750BN ATL800BN

I.D. INCHES (MM) .381 (9.7) .429 (10.9) .480 (12.2) .538 (13.7) .585 (14.9) .640 (16.3) .692 (17.6) .745 (18.9) .823 (20.9) .908 (23.1) 1.000 (25.4) 1.014 (25.8) 1.047 (26.6)

B C F H L

1/0 2/0 3/0 4/0 250 300 350 400

241 296 9/16 TU 52 7A, 8A 245 296 BG 5/8 TWTY 58 9A 166 467 3/4 TV 60 66 10A 298 660 840 TV 66 10A 249 324 658 840 TX 74 11A 251 470 1.00 TX 76 12A 299 654 705 1-1/8 TH, 87, 96, 13A 472 490 717 1-1/8 94, 96, 106, 14A 300 317 719 1- 5/16 106, 115, 15A 318 473 720 1-5/16 112, 115, 125 U 608 722 936 1-5/16 125

1.50 1.50 1.50 1.75 1.75 2.25 2.25 2.50 3.00 3.00 3.37 3.37 3.37

0.87 0.93 1.06 1.18 1.25 1.37 1.50 1.62 1.70 1.70 1.70 1.70 2.25

0.87 0.93 1.00 1.00 1.06 1.00 1.25 1.31

1.50 1.62 1.75 1.87 2.00 2.00 2.37 2.50 2.62 2.75 2.81 3.00 3.12

5.40 5.50 5.50 6.00 6.00 6.81 7.00 7.31 7.75 7.78 8.37 8.56 8.62

500 600 700-750 700-750 795-800

1.31 1.31 1.31

301 723 1-1/2 125 140 474 667 724 1-5/8 140 150

1.37 1.43

NOTE: Anderson’s VC63 Versa-Crimp tool will install sizes thru 500 MCM AHL-500-BN. VC6FT Versa-Crimp tool will install through AHL-750. A VC8 Versa-Crimp tool will accommodate sizes from 3/0 stranded through 1000 MCM AL / 1500 MCM CU.

ANDERSON ™

HUBBELL ® POWER SYSTEMS

FARGO ®

December 2014