LAMBTON DOORS ArchCat V14 Spt 2019

LAMBTON DOORS

FLUSH WOOD DOORS

MASTER SPECIFICATON – United States

08 14 16

P age 3 of 6

Final Draft: V05-03A/2016

Regionally.

e.

MR Credit 6 – Rapidly Renewable Materials

f.

MR Credit 7 – Certified Wood

.2.

Indoor Environmental Quality (IEQ) a.

IEQ Credit 4.4 – Low-Emitting materials, Composite Wood and Laminate Adhesives

1.7

DELIVERY, STORAGE, AND HANDLING

A. Deliver, store, protect and handle products in compliance with the Architectural Woodwork Standards; Section 2 Care & Storage, and manufacturer’s care and handling instructions. B. Deliver materials only when the project is ready for installation and the general contractor has provided a clean storage area. C. Accept doors on site in manufacturer’s standard packaging. Inspect for damage. D. Protect all doors from exposure to natural and artificial light after delivery. (Note: Certain wood species such as Cherry, Walnut, and Mahogany are light sensitive and should be protected from photo degradation.)

1.7

WARRANTY

A. Provide manufacturer’s standard lifetime warranty for “Full Life of Original Installation”, including hanging and finishing if door(s) do not comply with warranty tolerance standards. B. Include coverage for delamination, warping, bow, cup and telegraphing of core construction beyond warranty tolerances.

PART 2 PRODUCTS

2.1

MANUFACTURER

A.

Manufacturer: .1

Lambton Doors

.2

Other acceptable manufacturers

2.2

COMPONENTS

A.

Flush Wood Doors .1

Manufacture doors to ANSI/WDMA I.S. 1A-11 [Heavy Duty] [Extra Heavy Duty] performance level. (Note: AWS requires ANSI/WDMA Heavy Duty performance level for all doors. Refer to Architectural Woodwork Standards 2nd Edition 2014 (AWS) page 252 and page 264 for more information on performance duty levels and test criteria. ) Faces of wood veneered doors intended for transparent finish: [AA] [A] Grade, [Rotary Cut] [Plain Sliced] [Quarter Cut] [Rift Cut] , [Veneer Species] , [Book] [Slip] Match, [Run] [Balance] [Center Balance] , Match. (Note: Refer to the Architectural Woodwork Standards 2nd Edition 2014 (AWS) Section 9 Doors for details on Veneer Grades, Cuts, and Matching). .2.1 Faces of wood veneered doors intended for transparent finish: [without stain] [with stain], [AA] [A] Grade , Quarter Cut, [Maple] [Birch] , EuroMatch. (Note: In such a case, EuroMatch will limit cross break and cross figure on door faces). Faces at Plastic Laminate faced doors: [Manufacturer] [Thickness] [Pattern] [Color] [Finish] . Faces at doors for opaque finish: [High Density Fiberboard (HDF)] [MDO on HDF] .

.2

.3

.4