5646-R4_ML&P_TownOfBuxton_2016-2017_AnnualReport_Web

Footnotes: 6 Per Section 11.28, structures and uses in the BC, LC, and V, and BCDS-O Zones must conform to the Buxton Business and Commercial Zone Design Standards. 7 Conditional Use if floor area is not more than 3,000 sq. ft.; Use not permitted if floor area is more than 3,000 sq. ft. . . . 9 The Permitted Uses (P), Conditional Uses (E), and Uses not permitted (N) in the BCDS-O Zone shall be the same as in the underlying zone(s). 11.28 Design Standards for Commercial Buildings, Structures, and Uses Buxton’s Business Commercial (BC), Light Commercial (LC), and Village (V) Districts In addition to all other applicable performance standards, all commercial buildings and structures erected, reconstructed, renovated, altered, enlarged, or moved, and uses of the premises in the Business and Commercial (BC) Zone, Light Commercial (LC), and Village (V) , and Business Commercial Design Standards Overlay (BCDS-O) Districts Zones shall be in conformity with the provisions of the Buxton Business and Commercial Zone Design Standards. . . . BUXTON BUSINESS AND COMMERCIAL ZONE DESIGN STANDARDS SECTION 1. GENERAL D. General Provisions 2. Applicability. All commercial buildings and structures hereinafter erected, reconstructed, renovated, altered, enlarged, or moved, and uses of the premises in the Town of Buxton Business and Commercial (BC), Light Commercial (LC), and Village (V) , and Business Commercial Design Standards Overlay (BCDS-O) Districts Zones shall be in conformity with the provisions of this Ordinance. The provisions herein shall be minimum requirements. SECTION 4. ARCHITECTURE E. Façade Design 2. Design Standards c. Rear and Side Facades: Blank walls facing public roads, residential neighborhoods, or abutting properties are prohibited. Where rear or side facades are visible from adjacent properties or roadways, they shall be designed to match or complement the architectural treatment of the primary façade to give it scale and visual interest. Concealed fastened metal siding, 22 gauge or thicker may be used.

88