Control_Flippingbook_October 2023

1-44

NEMA FULL VOLTAGE POWER DEVICES, CONTROL SECTION 1

— CR307 magnetic starters Nonreversing, combination, thermal magnetic circuit breaker type

Part number configuration Valid for NEMA sizes 0-2, type 1 standard enclosure

— Step 8 (digit 16) select pilot device

Pilot light (heavy duty) type

Color — functionality

Code

None

A 1 2

LED lights

Red — across coil Green — across coil

Red — thru NO aux contact Green — thru NC aux contact

3 3 4 3 5 4 6 3 7 3

Red — thru NO aux contact and green — thru NC aux contact Red — across coil and green — thru NC aux contact Red — across coil and green — thru NC aux contact and unwired amber

Push-to-test lights

Red — across coil Green — across coil

R S

Red — thru NO aux contact Green — thru NC aux contact

C 3 D 3 E 4 V 3 Y 3

Red — thru NO aux contact and green — thru NC aux contact Red — across coil and green — thru NC aux contact Red — across coil and green — thru NC aux contact and unwired amber

3 Maximum of 3 aux contacts may be added to sizes 0 and 1. 4 Maximum of 2 aux contacts may be added to sizes 0 and 1. Maximum of 3 aux contacts may be added to sizes 2-4. Note: Auxiliary contacts wired as part of pilot light selection are in addition to the auxiliary contacts selected from Step 5 (digit 13) table, page 1-43, which are for customer/field connections.

— Step 9 (digit 17) select control options

Device

Code

None

A

General note: On NEMA size 3 and 4 starters if selecting factory installed and wired operator devices (push buttons, selector switches, and/or pilot lights) then control circuit fusing, a control power transformer, or 120 V separate sourced control is required when the protective device is rated greater than 100 amps.