EoW January 2009

wire drawing machines

PC wire line Mario Frigerio has a range of wire drawing lines available, including a new PC wire line for wires of up to 13mm diameter used for high-speed train sleepers. The in-line cutting system can carry out up to 60 cuts per minute. In order to produce straight wires at this diameter, the Mario Frigerio machine has twin capstans of 5,200mm diameter. This flexible machine allows the end user to treat 2/3 wires or a 7-wires strand. It uses a twin take-up/payoff spooling unit, the fully automatic Mario Frigerio layer winder. This line is equipped with a 500 kW furnace that allows a run speed of up to 400m per minute, in batches of 6 tons on the treatment line payoff, and double load on strand take-up/payoff. It has a 1,200mm capstan drawing line, made by Mario Frigerio, with horizontal payoff and the DIN 1600 spooler. Mario Frigerio SpA – Italy Fax : +39 0341 368 385 Email : info@mariofrigerio.it

Drawing equipment fromMario Frigerio ❍ ❍

Website : www.mariofrigerio.it

Pay-off and take-up lines TEAM has many years of experience in the manufacture of wire unwinding and rewinding systems that are used in heat treatment plants, in chemical or electrochemical surface treatment plants and in plating lines. Every one of those lines has its own special requirements regarding their processing cycle, that involve in-depth knowledge and technology of connected pay-off and take-up systems.

The technology of TEAM in this field is appreciated world-wide with thousands of units installed and operating reliably across the continents. The wide range of pay-off and take-up systems in TEAM’s catalogue for both spools and coils includes several configurations such as non-stop processing with wire accumulation systems, skin-pass dies, precise control of the wire tension between pay-off and take-up by means of loop-control devices, automatic loading and unloading systems and pattern-laying devices. Within this range, customers will always find the right equipment to fit the most demanding requirements. General features: spool size ranges between 50 and 1,500mm with capacity up to 5,000 kg; the coil weight up to 3,000 kg; the wire size ranges from 0.06 to 10mm and line speed up to 12 m/s.

A take-up line from TeamMeccanica ❍ ❍

Special arrangements are designed and tailor-made for stainless-steel annealing lines, steel cord plating lines, high-stiffness bead-wire, hose-wire and CO 2 welding wires. TeamMeccanica SpA – Italy Fax : +39 035 0779 728 Email : sales.office@teammeccanica.it Website : www.teammeccanica.it

48

EuroWire – January 2009