TPT September 2012

23-27 October 2012

In addition to power sources for welding, a number of different guiding systems and gantries are shown. This includes a rotating and clamping device for pipe welding as well as a height-adjustable turntable. It is part of a welding gantry for the highly efficient welding technology InFocus. The pipe welding device is flexible to use and can be equipped with GMAW and submerged-arc welding technique.

LAP GmbH is a specialist in the development, production, installation and commissioning of laser measuring systems for measuring the dimensions of unfinished and finished products in the metal and steel industry. “Preventing scrap which takes a lot of energy to melt down is one of the basic rules of steel production. LAP measuring systems are excellent in this regard, especially the Antaris Scan sensors in conjunction with our evaluation software, Slab Check,” noted Dr Axel Schulz, sales manager for the steel industry at LAP. LAP laser measuring systems check the dimensions of long and flat products including slabs, billets and pipes. LAP fabricates laser-supported systems for the contact-free measurement of distance, width, thickness, length, diameter, contour and flatness for the entire process chain from continuous casting to the finished product. LAP laser measuring systems enhance cost-effectiveness by reducing scrap and increasing throughput. “The more scrap is produced, the higher the production costs,” states Dr Schulz. “Let me give you an example. Let’s assume that you produce 1,000,000 tons of sheet 

The lower spindle is raised to achieve contact between blank and both forming rolls. As the spindles rotate the part revolves between the rolling dies. The lower spindle continues to elevate and transmit applied force to form the metal.



Website: www.fontijnegrotnes.com

Kjellberg Germany Germany

Hall 14 Stand B46

Website: www. kjellberg.de

AT the international technology trade show for sheet metal processing in Hanover from 23 – 27 October 2012, the Kjellberg Finsterwalde Group will present a wide range of products and technologies for thermal metalworking. The main focus is on products that improve the efficiency and precision of the production process. Plasma power sources of the HiFocus series and new plasma torches for exact and quick cutting in combination with guiding systems guarantee best results. For cutting very small holes on thin sheets and for marking tasks, cutting systems can be completed with the compact laser system XFocus.

LAP GmbH Laser Applikationen Germany

Hall 15 Stand H09

HIGH energy costs can strongly influence competitiveness in the steel industry. In particular, scrap and offcuts in the production of slabs, sheet metal and pipes require a great deal of energy when they are remelted. Using LAP measuring systems significantly increases measuring accuracy. The amount of scrap is reduced almost to zero, and energy costs are permanently lowered.

Our product lines: Forming machines of butt-weld pipe fitting. Beveling machines for pipe fittings. Pipe end beveling machine for Prefabricated pipe plant. Pipe fittings for fire protection, petro-chemical &pulp industry, etc. Auto threading m/c for socket &nipple. Transfer machine & special purpose m/e.

NIPPLE

SUS & A234

SOCKET

HAN SUM ENTERPRISE CO.LTD. Factory: No.17, Shyr Jian St., Ert Chen, Kuan-Tien Ind. Zone Tainan-Hsien, Taiwan, R.O.C. Tel:886-6-6986411~2 Fax:886-6-6983830

Website:http://www.hansum.com.tw E-mail:bevlform@ms23.hinet.net

124

www.read-tpt.com

September 2012