TPT September 2012

Industry News

T&H Lemont completes shipment of a coiled tubing mill

any future expansion of coiled tubing specifications. With five breakdown stands the mill is designed for high strength materials with maximum yields of 120,000ksi. While the mill is designed to produce tubing at speeds of up to 200ft per minute, actual production rates are limited by the auxiliary equipment. This is the second mill of this type purchased by T&H Lemont by this customer. Its purchasing decision was based on the success and efficiency of the original mill. In addition to complete production systems, T&H Lemont provides a variety of components and services to the tube and pipe industries. Services include tube and pipe roll design, mill alignment and operational consulting. Components offered by T&H Lemont include, but are not limited to, welders, cut-offs, entry equipment, accumulators, seam orientation stands, weld boxes, edge conditioner, bead scarfing systems, straightening systems, single point adjustment systems, dedimplers, rolls, blades, jaws and shafts.

productivity in existing oil and natural gas mills. The tube size range of the WU45 mill is from 1.75" to 4.5" OD round tubing. The customer had selected a 4.5" maximum OD to be prepared for

T&H LEMONT has recently shipped a Model WU45-12 high frequency welded coiled tubing mill for a customer in the USA. Its customer is a leading producer of coiled tubing for shipment worldwide. The end product is used for increasing

T&H Lemont – USA Email: sales@thlemont.com Website: www.thlemont.com Kent awarded orders

STOPFLEX ® RETENTION SYSTEM FOR PRESSURE HOSEs Stopflex Retention System was designed to arrest the trajectory of flexible hose, thus avoiding that the energy contained inside may trigger a frightening “whip effect”. As matter of fact, thanks to the Stopflex System, the hose is secured to the plant by means of a cable protecting both the operators and components.

KENT Corporation has received two orders for horizontal roller style accumulators. These accumulators are being shipped to US customers making API grade pipe and hollow structural sections (HSS) tubing. Both accumulators can run tube diameters up to 407mm and wall thicknesses up to 15.9mm, and yield strengths up to 827 MPa.

FIND OUT MORE ON WWW.OP-SRL.IT

Kent Corporation – USA Fax: +1 440 582 9654 Email: sales@kenttesgo.com Website: www.kenttesgo.com

Hydraulic Hose & Tubing Processing Equipment

12

www.read-tpt.com

S eptember 2012