TPT September 2012

Technology News

Dealing with the internal cleaning of pipes and shafts

the environment. For internal cleaning different lances or flexible nozzles from a diameter of 4mm in desired lengths are available. Therefore it is possible to clean sensitive components with curvatures and close passages much more easily. Of course the procedure is also well suited to the outside cleaning of shafts, pipes and cubic components at a factory. Larger and heavy parts can be cleaned on stationary collectors with desired dimensions and the water is reprocessed by a special recycling procedure so it can be reused. Besides the close-to-process parts cleaning the ph-cleantec cleaning devices can also be used in the field of machine maintenance.

THE cleaning of pipes and shafts can be – especially in the case of internal cleaning – a special challenge for conventional cleaning devices like high pressure and ultrasound washing machines. The difficulties increase further with small diameters or long and curved pipes. For this case ph-cleantec, with its universal low pressure hot cleaning technology, offers a simple and flexible alternative. The basic concept of this technologyical device consists of hand- guided systems operating with low pressure (up to a max 14 bar) and high water temperature (up to 95°C). By means of an electrical flow heater the technology is ready for operation within 1 minute and the low pressure makes sure that nothing is damaged and that the procedure can be used in the workshop without affecting workers and

ph-cleantec GmbH – Germany Email: info@ph-cleantec.de Website: www.ph-cleantec.com

Pipe and shaft cleaning

ONE longitudinal tube mill ERW – TWO High-Quality LINSINGER machines

Strip edge milling machine BFMK for welding edge preparation with highest accuracy

Travelling tube cut-off machine Multi-cut for very short cutting times

Both machines are adapted on the line speed

VISIT US: Stand 1/26/1J25

Dr. Linsinger-Str. 24, A-4662 Steyrermuehl Tel. +43 7613 88 40, Fax +43 7613 88 40-951 E-Mail: maschinenbau@linsinger.com

w w w. l i n s i n g e r . c o m

Tube-and-Pipe_180x125_310712.indd 1

31.07.2012 22:41

90

www.read-tpt.com

S eptember 2012