EuroWire November 2018

wire India 2018

27 th- 29 th November

even be eliminated to stop an increase in the drawing cost. latest measurement system imported from KJM GmbH, Germany, to maintain the accuracy of the dies. Shree Mahalaxmi Die Industries – India Website : www.mahalaxmidie.in The company has the Sikora will present a broad portfolio of innovative measuring, control, inspection, sorting and analysis technologies. These contribute to product quality, process optimisation and cost saving in the wire and cable, optical bre and plastics industries. The newly launched X-Ray 8000 Advanced will be a highlight at the stand. With the X-ray based system, the company introduces high-speed technology (HST) that is tailored to the demands of MV, HV and EHV cable production. It represents an advanced alternative to the established X-Ray 8000 NXT. The system is equipped with 16 measuring sensors, and measures the diameter, wall thickness and eccentricity of cables in CV lines up to a factor of ten faster than the X-Ray 8000 NXT, and thus, is predestined for an even more e cient control and information transparency in terms of Industry 4.0. Other highlights are devices of the Laser Series 2000 and Laser Series 6000 that are components for diameter measurement on a sophisticated level. The classic and high-end devices are used in extrusion lines or rewinding applications for wire drawing. They stand out by their high precision and continuous functionality without calibration or maintenance times. Due to up to 5,000 measurements per second/per axis, the Laser Series 6000 impresses with the highest single value precision for an e cient line control. The integrated lump detector function ensures a detection of irregularities on the product surface of transparent and non-transparent materials. In addition to standard interfaces, the device series provides OPC UA. With the Centerview 8000, Sikora presents a measuring system for the non-contact, online eight-point- eccentricity, four-axis-diameter and eight-point-ovality measurement of Sikora Stand: H1I73

The liquid metal is protected from the atmosphere by being enclosed within an argon gas environment. the production of 1,000 to 12,000 tonnes per year in the diameter range 8 to 30mm. Sample coils can be manufactured to order and produced on the continuous casting equipment installed at the Rautomead facility in Dundee, UK. Rautomead Ltd – UK Website : www.rautomead.com Equipment is available for Rosendahl Nextrom will once again be part of wire India and show the latest developments in the following areas: • LAN cable production line • Solar cable production line, in co-extrusion as well as tandem extrusion • High-speed house wiring lines with speeds of up to 1,500mpm • Manufacturing solutions for bre optic cables such as loose tubes, SZ stranding, jacketing and tight bu er • Fibre draw towers of up to 3,000mpm and a maximum preform size of up to 8.8m (including handle) • VAD/OVD preform technology Rosendahl Nextrom GmbH – Austria Website : www.rosendahlnextrom.com E ective maintenance and repair for wire drawing die moulds is important to decrease the cost of wire drawing. Due to the vibration of the wire, the die compression zone area is the rst to produce slight ring wear, which then expands to the sizing area, resulting in a decline in quality of wire rod performance. Serious wear and tear can lead to moulds producing transverse cracks (mainly in soft wire drawing) or longitudinal cracks appearing in the control of hard wire. In general, small polishing of ring wear can be used to restore or slightly expand diameter to meet the drawing requirements. Excessive wear can greatly reduce the mould repair times or Rosendahl Nextrom Stand: G55 Shree Mahalaxmi Die Industries Stand: D124

➣➢➣

and develops intermediate and large dies, and is working to develop new technologies that will deliver higher value to die users. All of these factors allow Paramount to deliver high quality wire dies to wire drawers across the globe. With an eye toward the future, Paramount continues to improve die quality and develop new technologies to maximise the value returned to wire drawers. Paramount Die – USA Website : www.paradie.com Rautomead Stand: F117 Rautomead will be exhibiting its conventional open-furnace model continuous casting machines, which are used for the production of high-purity, high-quality oxygen-free copper wire rods and also conductor alloy rods such as CuMg, CuAg and CuSn. This continuous cast rod material bene ts manufacturers of enamelled wires, super ne wires, LAN cables, automotive wiring harnesses, stranded railway wires, shaped contact wires, CTC and transformer strips. ▲ Paramount has introduced several products that have become wire industry standards

RSL 1400 for CuCrZr

▲

Rautomead will also be exhibiting its new sealed-lid continuous casting RSL technology designed for processing progressive alloy rods such as copper chrome zirconium. The single-furnace multi-chamber design accurately controls and maintains the target composition by varying the feed rate of each of the constituent elements.

➣➢➣

46

www.read-eurowire.com

November 2018