GE Products BuyLog Smart Catalog

Low Voltage Power & Insulated Case Circuit Breakers Section 8

EntelliGuard ™ G Low Voltage Power Circuit Breakers EntelliGuard ™ G Accessories

Circuit Breaker - Key Interlock Facility This option supplies factory-installed key interlock mounting provisions (baseplates and mechanism) on the front of the breaker fascia. Key interlocks ensure that a circuit breaker cannot be closed unless the dedicated key has been inserted and secured within the lock. Circuit breakers accept ready-to-fit interlocking device kits such as Castell, Ronis, Kirk and Profalux for installation between related, separate circuit breakers. Product Description Number Baseplate and mechanism for Kirk Key GBKRKR Locks (Breaker Mounted) Baseplate and mechanism for Ronis Locks GBRONR (Breaker Mounted) Mechanism for Ronis Key cassette interlock GCRONR (Cassette mounted) Mechanism for Kirk Key cassette interlock GCKRKR (Cassette mounted) Carriage Position Switch (TOC) Available as an option for mounting within the base of the cassette/substructure, the carriage position switch provides six single-pole changeover contacts (single pole, double throw) for local or remote electrical indication of the circuit breaker status: CONNECTED, TEST and DISCONNECTED. The DISCONNECTED position is indicated only when minimum isolating distances between contacts on both the main and auxiliary circuits have been achieved. This option is in addition to the mechanical indicators, which are fitted as standard. When installed, the carriage switch is IP2X protected. Switch Product Configuration Number 1 NO/NC switch per position GCPS1R Set of 2 NO/NC switches per position GCPS2R Set of 6 NO/NC switches connected position GCPS3R

Key Interlock Facility

Carriage Position Switch (TOC)

Rev. 1/19 Data subject to change without notice

go.abb/industrial

GE Products BuyLog

8-17